This answer record lists all of the known issues and answer records that pertain to the Virtex-6 FPGA GTH Transceiver.
Usage
(Xilinx Answer 45166) | Virtex-6 FPGA GTH Transceivers - Lane powerdown can cause burst of errors in the Quad |
(Xilinx Answer 45335) | Virtex-6 FPGA GTH Transceivers - Using PRBS_ERR_CNT_LANE and PRBS_TIMER_LANE registers |
(Xilinx Answer 43829) | Virtex-6 FPGA GTH Transceivers - Incorrect RXBUFRESET connections in the wrapper in x4 mode |
(Xilinx Answer 42987) | Virtex-6 FPGA GTH Transceivers - Reference clock phase noise mask |
(Xilinx Answer 43346) | Virtex-6 FPGA GTH - Recommendation for non-retimed 10G+ optical interfaces (e.g., SFP+ and QSFP) |
(Xilinx Answer 42927) | Virtex-6 FPGA GTH Transceivers - BUFFER_CONFIG_LANEx should be set to manual adjustment mode |
(Xilinx Answer 42131) | Virtex-6 FPGA GTH Transceivers - Incorrect Attribute Settings Could Affect Performance |
(Xilinx Answer 41909) | Virtex-6 FPGA GTH Transceivers - TX and RX Latency Values |
(Xilinx Answer 38571) | Virtex-6 FPGA GTH Transceiver - Manually setting the tap values for the DFE |
(Xilinx Answer 39756) | 12.4/13.x ChipScope tool IBERT - How do I set the Virtex-6 FPGA GTH Transceivers in various loopback modes? |
(Xilinx Answer 34916) | Virtex-6 FPGA RocketIO - How to connect unused Virtex-6 FPGA GTH pins |
(Xilinx Answer 34605) | Virtex-6 HXT - Power Sequence Requirement between Digital Power Supplies and GTH Analog Power Supplies |
(Xilinx Answer 33485) | Virtex-6 FPGA GTH Transceiver - Pin name differences between software package files and documentation |
(Xilinx Answer 35386) | Virtex-6 FPGA - Does Virtex-6 FPGA have CRC hard blocks? |
Wizard
(Xilinx Answer 33866) | Virtex-6 FPGA GTH Transceiver Wizard v1.2 - Release Notes and Known Issues |
(Xilinx Answer 35429) | Virtex-6 FPGA GTH Transceiver Wizard v1.3 - Release Notes and Known Issues |
(Xilinx Answer 38397) | Virtex-6 FPGA GTH Transceiver Wizard v1.5 - Release Notes and Known Issues |
(Xilinx Answer 33799) | Virtex-6 FPGA GTH Transceiver Wizard - NCSIM simulation fails with error "ncvlog: *E,NGITEM (../../example_design/v6gth_wrapper_gth_init.v,142|14): Not a valid generate item: 'parameter_declaration' [12.1.3(IEEE 2001)]." |
(Xilinx Answer 39758) | Virtex-6 FPGA GTH Transceiver Wizard v1.6 - Release Notes and Known Issues for ISE Software 12.4 |
(Xilinx Answer 40746) | Virtex-6 FPGA GTH Transceiver Wizard v1.7 - Known Issues and Release Notes |
(Xilinx Answer 41518) | Virtex-6 FPGA GTH Transceiver Wizard v1.8 - Release Notes and Known Issues |
(Xilinx Answer 44488) | Virtex-6 FPGA GTH Transceiver Wizard v1.9 - Release Notes and Known Issues |
(Xilinx Answer 45075) | Virtex-6 FPGA GTH Transceivers - Wizard v1.9 incorrectly sets GTH Transceivers in PMA loopback by default |
(Xilinx Answer 45660) | Virtex-6 FPGA GTH Transceiver Wizardv1.10 - Release Notes and Known Issues |
(Xilinx Answer 45424) | Virtex-6 FPGA GTH Transceiver Wizardv1.9 - VHDL code of example design is not implementing correctly |
(Xilinx Answer 47479) | Virtex-6 FPGA GTH Transceiver Wizardv1.7 Rev 3 - Release Notes and Known Issues |
(Xilinx Answer 47478) | Virtex-6 FPGA GTH Transceiver Wizardv1.11 - Release Notes and Known Issues |
ES Silicon
(Xilinx Answer 37182) | Virtex-6 FPGA GTH Transceiver - Clarification on ES errata item regarding T_BLOCK_TYPE |
(Xilinx Answer 37763) | Virtex-6 FPGA GTH Transceiver - AC-JTAG, 1149.6 design considerations |
(Xilinx Answer 38283) | Virtex-6 FPGA GTH Transceiver - ES HXT operating recommendations |
Production Silicon
(Xilinx Answer 41734) | ChipScope IBERT - Virtex-6 GTH Transceivers Production Silicon Support |
(Xilinx Answer 40902) | Virtex-6 FPGA GTH Transceiver - Updates for Production HXT; attributes and initialization sequences |
(Xilinx Answer 40885) | Design Advisory for the Virtex-6 FPGA Production GTH Transceivers |
Silicon Version
(Xilinx Answer 41464) | Virtex-6 FPGA HXT Devices - How do you identify an Engineering Sample versus Production Silicon? |
AR# 38596 | |
---|---|
日期 | 09/03/2019 |
状态 | Active |
Type | 已知问题 |
器件 | |
IP |