AR# 47852

描述

解决方案

Usage

• (Xilinx Answer 58162) Design Advisory for Artix-7 FPGA Wire-bond Package Devices - SelectIO prohibits pin list when GTP Transceivers are used
• (Xilinx Answer 44549) 7 Series FPGA GTX/GTH/GTP Transceivers - Reference clock phase noise masks
• (Xilinx Answer 58981) 7 Series GTP Transceiver - TX and RX Latency Values
• (Xilinx Answer 53500) Serial Transceiver - Why is GREFCLK is not recommended as REFCLK for GTX?
• (Xilinx Answer 51017) 7 Series FPGA GTP Transceiver Power-Up/Power-Down
• (Xilinx Answer 51448) 7 Series FPGA GTP Transceivers - RX Termination Use Modes
• (Xilinx Answer 47975) 7 Series GTP Transceivers: BUFG/BUFH must be used between TX/RXOUTCLK and MMCM/PLL
• (Xilinx Answer 43420) Xilinx Serial Transceivers - Can the LVDS standard be used for reference clocks?
• (Xilinx Answer 46200) 7 Series GTP/GTX/GTH - RXBYTEISALIGNED is not always reliable
• (Xilinx Answer 43641) MGT - Does GTX/GTP/GTH support REFCLKs with HCSL I/O standard?
• (Xilinx Answer 56066) 7 Series FPGAs GTX/GTH/GTP Transceivers: Optimal RX Buffer Settings - CLK_COR_MIN_LAT and CLK_COR_MAX_LAT
• (Xilinx Answer 56894) 7 Series GTX/GTH/GTP Transceivers - DFE/LPM Optimized Settings for Non-scrambled Signal
  

Wizard

• (Xilinx Answer 54691) IP Release Notes and Known Issues for 7 Series FPGAs Transceivers Wizard for Vivado 2013.1 and newer versions
• (Xilinx Answer 60489) Design Advisory for 7 Series FPGAs Transceivers Wizard v3.2 or earlier: GTH/GTP Production RX reset sequence can get stuck 
• (Xilinx Answer 59294) Design Advisory GT wizard - CPLL causes power spike on power up for 7 series GTs
• (Xilinx Answer 56117) 7 Series GTX/GTH/GTP TX buffer bypass port settings mismatch with user guide
• (Xilinx Answer 55791) Design Advisory for 7 Series FPGAs Transceivers Wizard - Required Updates to Wizard v2.5
• (Xilinx Answer 55366) Design Advisory for 7 Series FPGA GTX/GTH/GTP Transceivers: Transceiver Wizard Sets Suboptimal RX Termination Use Modes
• (Xilinx Answer 55009) Design Advisory for 7 Series FPGA GTX/GTH/GTP Transceivers - TX Sync Controller Change for Phase Alignment in Buffer Bypass Mode
• (Xilinx Answer 53396) 7 Series FPGAs Transceiver Wizard v2.4 - Known Issues and Release Notes
• (Xilinx Answer 52263) 7 Series FPGAs Transceivers Wizard v2.3 - Known Issues and Release Notes
• (Xilinx Answer 50827) 7 Series FPGAs Transceivers Wizard v2.2 - Known Issues and Release Notes
• (Xilinx Answer 47477) 7 Series FPGAs Transceivers Wizard v2.1 - Known Issues and Release Notes
• (Xilinx Answer 47492) 7 Series GTP Transceivers - Buffer bypass default attributes
• (Xilinx Answer 46048) 7 Series FPGAs Transceivers Wizard - What silicon revisions are supported by different Wizard or ISE design tool versions?
• (Xilinx Answer 50890) 7 Series FPGAs Transceivers Wizard Flow in Vivado Design Suite 2012.2/2012.3/2012.4

Implementation

• (Xilinx Answer 47688) 7 Series FPGA GTP Transceiver - Implementation error in ISE 14.1/Vivado 2012.1 design tools when sharing reference clocks

Silicon Revision Specific

• (Xilinx Answer 51369) Design Advisory for the Artix-7 FPGA GTP Transceiver - Attribute Updates, Issues, and Work-arounds for Initial/General Engineering Sample (ES) Silicon
• (Xilinx Answer 53561) Design Advisory for Artix-7 FPGA GTP Transceivers: RX Reset Sequence Requirement for Production Silicon 

Protocols

• (Xilinx Answer 57740) Artix-7 FPGA GTP Wizard v2.6 in ISE 14.6 - VHDL wrapper has RX termination set incorrectly for PCIe 
• (Xilinx Answer 51402) 7 Series Integrated Block for PCI Express v1.6: Incorrect RX_CM_TRIM[4:0] setting for Artix-7 FPGAs

链接问答记录

子答复记录

相关答复记录