xfOpenCV Library API Reference

To facilitate local memory allocation on FPGA devices, the xfOpenCV library functions are provided in templates with compile-time parameters. Data is explicitly copied from cv::Mat to xf::Mat and is stored in physically contiguous memory to achieve the best possible performance. After processing, the output in xf::Mat is copied back to cv::Mat to write it into the memory.

xf::Mat Image Container Class

xf::Mat is a template class that serves as a container for storing image data and its attributes.

Note: The xf::Mat image container class is similar to the cv::Mat class of the OpenCV library.

Class Definition

template<int T, int ROWS, int COLS, int NPC>
class Mat {

  public:
    unsigned char allocatedFlag;            // flag to mark memory allocation in this class
    int rows, cols, size;                   // actual image size

#ifdef __SDSVHLS__
    typedef XF_TNAME(T,NPC) DATATYPE;
#else                                       // When not being built for V-HLS
    typedef struct {
        XF_CTUNAME(T,NPC) chnl[XF_NPIXPERCYCLE(NPC)][XF_CHANNELS(T,NPC)];
    } __attribute__ ((packed)) DATATYPE;
#endif

//#if (defined  (__SDSCC__) ) || (defined (__SYNTHESIS__))
#if defined (__SYNTHESIS__) && !defined (__SDA_MEM_MAP__)
    DATATYPE *data __attribute((xcl_array_geometry((ROWS)*(COLS>> (XF_BITSHIFT(NPC))))));//data[ ROWS * ( COLS >> ( XF_BITSHIFT ( NPC ) ) ) ];
#else
    DATATYPE *data;
#endif


    Mat();                                  // default constructor
    Mat(Size _sz);
    Mat(int _rows, int _cols);
    Mat(int _size, int _rows, int _cols);
    Mat(int _rows, int _cols, void *_data);
    Mat(const Mat&);                        // copy constructor

    ~Mat();

    Mat& operator= (const Mat&);            // Assignment operator
//  XF_TNAME(T, XF_NPPC1) operator() (unsigned int r, unsigned int c);
//  XF_CTUNAME(T, NPC) operator() (unsigned int r, unsigned int c, unsigned int ch);
    XF_TNAME(T,NPC) read(int index);
    float read_float(int index);
    void write(int index, XF_TNAME(T,NPC) val);
    void write_float(int index, float val);

    void init (int _rows, int _cols, bool allocate=true);
    void copyTo (void* fromData);
    unsigned char* copyFrom ();

    const int type() const;
    const int depth() const;
    const int channels() const;

    template<int DST_T>
    void convertTo (Mat<DST_T, ROWS, COLS, NPC> &dst, int otype, double alpha=1, double beta=0);
};

Parameter Descriptions

The following table lists the xf::Mat

Table 1. xf::Mat Class Parameter Descriptions
Parameter Description
rows The number of rows in the image or height of the image.
cols The number of columns in the image or width of the image. class parameters and their descriptions:
size The number of words stored in the data member. The value is calculated using rows*cols/(number of pixels packed per word).
allocatedFlag Flag for memory allocation status
*data class parameters and the pointer to the words that store the pixels of the image.

Member Functions Description

The following table lists the member functions and their descriptions:

Table 2. xf::Mat Member Function Descriptions
Member Functions Description
Mat() This default constructor initializes the Mat object sizes, using the template parameters ROWS and COLS.
Mat(int _rows, int _cols) This constructor initializes the Mat object using arguments _rows and _cols.
Mat(const xf::Mat &_src) This constructor helps clone a Mat object to another. New memory will be allocated for the newly created constructor.
Mat(int _rows, int _cols, void *_data) This constructor initializes the Mat object using arguments _rows, _cols, and _data. The *data member of the Mat object points to the memory allocated for _data argument, when this constructor is used. No new memory is allocated for the *data member.
convertTo(Mat<DST_T,ROWS, COLS, NPC> &dst, int otype, double alpha=1, double beta=0) Refer to xf::convertTo
copyTo(* fromData) Copies the data from Data pointer into physically contiguous memory allocated inside the constructor.
copyFrom() Returns the pointer to the first location of the *data member.
read(int index) Readout a value from a given location and return it as a packed (for multi-pixel/clock) value.
read_float(int index) Readout a value from a given location and return it as a float value
write(int index, XF_TNAME(T,NPC) val) Writes a packed (for multi-pixel/clock) value into the given location.
write_float(int index, float val) Writes a float value into the given location.
type() Returns the type of the image.
depth() Returns the depth of the image
channels() Returns number of channels of the image
~Mat() This is a default destructor of the Mat object.

Template Parameter Descriptions

Template parameters of the xf::Mat class are used to set the depth of the pixel, number of channels in the image, number of pixels packed per word, maximum number of rows and columns of the image. The following table lists the template parameters and their descriptions:

Table 3. xf::Mat Template Parameter Descriptions
Parameters Description
TYPE Type of the pixel data. For example, XF_8UC1 stands for 8-bit unsigned and one channel pixel. More types can be found in include/common/xf_params.h.
HEIGHT Maximum height of an image.
WIDTH Maximum width of an image.
NPC The number of pixels to be packed per word. For instance, XF_NPPC1 for 1 pixel per word; and XF_NPPC8 for 8 pixels per word.

Pixel-Level Parallelism

The amount of parallelism to be implemented in a function from xfOpenCV is kept as a configurable parameter. In most functions, there are two options for processing data.

  • Single-pixel processing
  • Processing eight pixels in parallel

The following table describes the options available for specifying the level of parallelism required in a particular function:

Table 4. Options Available for Specifying the Level of Parallelism
Option Description
XF_NPPC1 Process 1 pixel per clock cycle
XF_NPPC2 Process 2 pixels per clock cycle
XF_NPPC4 Process 4 pixels per clock cycle
XF_NPPC8 Process 8 pixels per clock cycle

Macros to Work With Parallelism

There are two macros that are defined to work with parallelism.

  • The XF_NPIXPERCYCLE(flags) macro resolves to the number of pixels processed per cycle.
    • XF_NPIXPERCYCLE(XF_NPPC1) resolves to 1
    • XF_NPIXPERCYCLE(XF_NPPC2) resolves to 2
    • XF_NPIXPERCYCLE(XF_NPPC4) resolves to 4
    • XF_NPIXPERCYCLE(XF_NPPC8) resolves to 8
  • The XF_BITSHIFT(flags) macro resolves to the number of times to shift the image size to right to arrive at the final data transfer size for parallel processing.
    • XF_BITSHIFT(XF_NPPC1) resolves to 0
    • XF_BITSHIFT(XF_NPPC2) resolves to 1
    • XF_BITSHIFT(XF_NPPC4) resolves to 2
    • XF_BITSHIFT(XF_NPPC8) resolves to 3

Pixel Types

Parameter types will differ, depending on the combination of the depth of pixels and the number of channels in the image. The generic nomenclature of the parameter is listed below.
XF_<Number of bits per pixel><signed (S) or unsigned (U) or float (F)>C<number of channels>

For example, for an 8-bit pixel - unsigned - 1 channel the data type is XF_8UC1.

The following table lists the available data types for the xf::Mat class:

Table 5. xf::Mat Class - Available Data Types
Option Number of bits per Pixel Unsigned/ Signed/ Float Type Number of Channels
XF_8UC1 8 Unsigned 1
XF_16UC1 16 Unsigned 1
XF_16SC1 16 Signed 1
XF_32UC1 32 Unsigned 1
XF_32FC1 32 Float 1
XF_32SC1 32 Signed 1
XF_8UC2 8 Unsigned 2
XF_8UC4 8 Unsigned 4
XF_8UC3 8 Unsigned 3
XF_2UC1 2 Unsigned 1

Manipulating Data Type

Based on the number of pixels to process per clock cycle and the type parameter, there are different possible data types. The xfOpenCV library uses these datatypes for internal processing and inside the xf::Mat class. The following are a few supported types:

  • XF_TNAME(TYPE,NPPC) resolves to the data type of the data member of the xf::Mat object. For instance, XF_TNAME(XF_8UC1,XF_NPPC8) resolves to ap_uint<64>.
  • Word width = pixel depth * number of channels * number of pixels to process per cycle (NPPC).
  • XF_DTUNAME(TYPE,NPPC) resolves to the data type of the pixel. For instance, XF_DTUNAME(XF_32FC1,XF_NPPC1) resolves to float.
  • XF_PTSNAME(TYPE,NPPC) resolves to the ‘C’ data type of the pixel. For instance, XF_PTSNAME (XF_16UC1,XF_NPPC2) resolves to unsigned short.
Note: ap_uint<>, ap_int<>, ap_fixed<>, and ap_ufixed<> types belong to the high-level synthesis (HLS) library. For more information, see the Vivado Design Suite User Guide: High-Level Synthesis (UG902).

Sample Illustration

The following code illustrates the configurations that are required to build the gaussian filter on an image, using the SDSoC™ tool for Zynq® UltraScale™ platform.
Note: In case of a real-time application, where the video is streamed in, it is recommended that the location of frame buffer is xf::Mat and is processed using the library function. The resultant location pointer is passed to display IPs.

xf_config_params.h

#define FILTER_SIZE_3 1
#define FILTER_SIZE_5 0
#define FILTER_SIZE_7 0
#define RO 0
#define NO 1

#if NO
#define NPC1 XF_NPPC1
#endif
#if RO
#define NPC1 XF_NPPC8
#endif

xf_gaussian_filter_tb.cpp

int main(int argc, char **argv) 
{
cv::Mat in_img, out_img, ocv_ref;
cv::Mat in_gray, in_gray1, diff;
in_img = cv::imread(argv[1], 1); // reading in the color image
		extractChannel(in_img, in_gray, 1);

xf::Mat<XF_8UC1, HEIGHT, WIDTH, NPC1> imgInput(in_img.rows,in_img.cols);
xf::Mat<XF_8UC1, HEIGHT, WIDTH, NPC1> imgOutput(in_img.rows,in_img.cols);

imgInput.copyTo(in_gray.data);

gaussian_filter_accel(imgInput,imgOutput,sigma);

// Write output image
xf::imwrite("hls_out.jpg",imgOutput);
}

xf_gaussian_filter_accel.cpp

#include "xf_gaussian_filter_config.h"

void gaussian_filter_accel(xf::Mat<XF_8UC1,HEIGHT,WIDTH,NPC1> &imgInput,xf::Mat<XF_8UC1,HEIGHT,WIDTH,NPC1>&imgOutput,float sigma)
{
	xf::GaussianBlur<FILTER_WIDTH, XF_BORDER_CONSTANT, XF_8UC1, HEIGHT, WIDTH, NPC1>(imgInput, imgOutput, sigma);
}

xf_gaussian_filter.hpp

#pragma SDS data data_mover("_src.data":AXIDMA_SIMPLE)
        #pragma SDS data data_mover("_dst.data":AXIDMA_SIMPLE)
        #pragma SDS data access_pattern("_src.data":SEQUENTIAL)
        #pragma SDS data copy("_src.data"[0:"_src.size"])
        #pragma SDS data access_pattern("_dst.data":SEQUENTIAL)
        #pragma SDS data copy("_dst.data"[0:"_dst.size"])
        
        template<int FILTER_SIZE, int BORDER_TYPE, int SRC_T, int ROWS, int COLS,int NPC = 1>
        void GaussianBlur(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst, float sigma)
        {
        //function body
        }

The design fetches data from external memory (with the help of SDSoC data movers) and is transferred to the function in 8-bit or 64-bit packets, based on the configured mode. Assuming 8-bits per pixel, 8 pixels can be packed into 64-bits. Therefore, 8 pixels are available to be processed in parallel.

Enable the FILTER_SIZE_3 and the NO macros in the xf_config_params.h file. The macro is used to set the filter size to 3x3 and #define NO 1 macro enables 1 pixel parallelism.

Specify the SDSoC tool specific pragmas, in the xf_gaussian_filter.hpp file. 

#pragma SDS data data_mover("_src.data":AXIDMA_SIMPLE)
#pragma SDS data data_mover("_dst.data":AXIDMA_SIMPLE)
#pragma SDS data access_pattern("_src.data":SEQUENTIAL)
#pragma SDS data copy("_src.data"[0:"_src.size"])
#pragma SDS data access_pattern("_dst.data":SEQUENTIAL)
#pragma SDS data copy("_dst.data"[0:"_dst.size"])
Note: For more information on the pragmas used for hardware accelerator functions in SDSoC, see SDSoC Environment User Guide (UG1027).

xf::imread

The function xf::imread loads an image from the specified file path, copies into xf::Mat and returns it. If the image cannot be read (because of missing file, improper permissions, unsupported or invalid format), the function exits with a non-zero return code and an error statement.
Note: In an HLS standalone mode like Cosim, use cv::imread followed by copyTo function, instead of xf::imread.

API Syntax

template<int PTYPE, int ROWS, int COLS, int NPC>
xf::Mat<PTYPE, ROWS, COLS, NPC> imread (char *filename, int type)

Parameter Descriptions

The table below describes the template and the function parameters.

Table 6. xf::imread Function Parameter Descriptions
Parameter Description
PTYPE Input pixel type. Value should be in accordance with the ‘type’ argument’s value.
ROWS Maximum height of the image to be read
COLS Maximum width of the image to be read
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
filename Name of the file to be loaded
type Flag that depicts the type of image. The values are:
  • '0' for gray scale
  • '1' for color image

xf::imwrite

The function xf::imwrite saves the image to the specified file from the given xf::Mat. The image format is chosen based on the file name extension. This function internally uses cv::imwrite for the processing. Therefore, all the limitations of cv::imwrite are also applicable to xf::imwrite.

API Syntax

template <int PTYPE, int ROWS, int COLS, int NPC>
void imwrite(const char *img_name, xf::Mat<PTYPE, ROWS, COLS, NPC> &img)

Parameter Descriptions

The table below describes the template and the function parameters.

Table 7. xf::imwrite Function Parameter Descriptions
Parameter Description
PTYPE Input pixel type. Supported types are: XF_8UC1, XF_16UC1, XF_8UC4, and XF_16UC4
ROWS Maximum height of the image to be read
COLS Maximum width of the image to be read
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
img_name Name of the file with the extension
img xf::Mat array to be saved

xf::absDiff

The function xf::absDiff computes the absolute difference between each individual pixels of an xf::Mat and a cv::Mat, and returns the difference values in a cv::Mat.

API Syntax

template <int PTYPE, int ROWS, int COLS, int NPC>
void absDiff(cv::Mat &cv_img, xf::Mat<PTYPE, ROWS, COLS, NPC>& xf_img, cv::Mat &diff_img )

Parameter Descriptions

The table below describes the template and the function parameters.

Table 8. xf::absDiff Function Parameter Descriptions
Parameter Description
PTYPE Input pixel type
ROWS Maximum height of the image to be read
COLS Maximum width of the image to be read
NPC

Number of pixels to be processed per cycle; possible options are XF_NPPC1, XF_NPPC4, and XF_NPPC8 for 1-pixel, 4-pixel, and 8-pixel parallel operations respectively.
cv_img cv::Mat array to be compared
xf_img xf::Mat array to be compared
diff_img Output difference image(cv::Mat)

xf::convertTo

The xf::convertTo function performs bit depth conversion on each individual pixel of the given input image. This method converts the source pixel values to the target data type with appropriate casting. 

dst(x,y)= cast<target-data-type>(α(src(x,y)+β))
Note: The output and input Mat cannot be the same. That is, the converted image cannot be stored in the Mat of the input image.

API Syntax

template<int DST_T> void convertTo(xf::Mat<DST_T,ROWS, COLS, NPC> &dst, int ctype, double alpha=1, double beta=0)

Parameter Descriptions

The table below describes the template and function parameters.

Table 9. xf::convertTo Function Parameter Descriptions
Parameter Description
DST_T Output pixel type. Possible values are XF_8UC1, XF_16UC1, XF_16SC1, and XF_32SC1.
ROWS Maximum height of image to be read
COLS Maximum width of image to be read
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1, XF_NPPC4, and XF_NPPC8 for 1-pixel, 4-pixel, and 8-pixel parallel operations respectively. XF_32SC1 and XF_NPPC8 combination is not supported.
dst Converted xf Mat
ctype Conversion type : Possible values are listed here.

//Down-convert:

  • XF_CONVERT_16U_TO_8U

  • XF_CONVERT_16S_TO_8U

  • XF_CONVERT_32S_TO_8U

  • XF_CONVERT_32S_TO_16U

  • XF_CONVERT_32S_TO_16S

//Up-convert:

  • XF_CONVERT_8U_TO_16U

  • XF_CONVERT_8U_TO_16S

  • XF_CONVERT_8U_TO_32S

  • XF_CONVERT_16U_TO_32S

  • XF_CONVERT_16S_TO_32S
alpha Optional scale factor
beta Optional delta added to the scaled values

xfOpenCV Library Functions

The xfOpenCV library is a set of select OpenCV functions optimized for Zynq-7000 and Zynq UltraScale+ MPSoC devices. The following table lists the xfOpenCV library functions.

Table 10. xfOpenCV Library Functions
Computations Input Processing Filters Other
Absolute Difference Bit Depth Conversion Bilateral Filter Canny Edge Detection
Accumulate Channel Combine Box Filter FAST Corner Detection
Accumulate Squared Channel Extract Custom Convolution Harris Corner Detection
Accumulate Weighted Color Conversion Dilate Histogram Computation
Atan2 Histogram Equalization Erode Dense Pyramidal LK Optical Flow
Bitwise AND, Bitwise NOT, Bitwise OR, Bitwise XOR Look Up Table Gaussian Filter Dense Non-Pyramidal LK Optical Flow
Gradient Magnitude Remap Sobel Filter MinMax Location
Gradient Phase Resolution Conversion (Resize) Median Blur Filter Thresholding
Integral Image convertScaleAbs Scharr Filter SVM
Inverse (Reciprocal) Demosaicing   Otsu Threshold
Pixel-Wise Addition Crop Mean Shift Tracking
Pixel-Wise Multiplication Reduce HOG
Pixel-Wise Subtraction BoundingBox Semi Global Method for Stereo Disparity Estimation
Square Root WarpTransform
Mean and Standard Deviation Pyramid Up
AddS, Compare, CompareS, Max, MaxS, Min, MinS, Set, SubRS, SubS, Zero Pyramid Down
Sum Delay
Addweighted Duplicate
      Color Thresholding
      BGR2HSV
      InitUndistortRectifyMapInverse
      HoughLines
      Semi Global Method for Stereo Disparity Estimation
      Paintmask
      InRange
      Kalman Filter
  1. The maximum resolution supported for all the functions is 4K, except Houghlines and HOG (RB mode).
Note: Resolution Conversion (Resize) in 8 pixel per cycle mode, Dense Pyramidal LK Optical Flow, and Dense Non-Pyramidal LK Optical Flow functions are not supported on the Zynq-7000 SoC ZC702 devices, due to the higher resource utilization.
Note: Number of pixel per clock depends on the maximum bus width a device can support.

For example: Zynq-7000 Soc has 64 bit interface and so for a pixel type 16UC1 ,maximum of four pixel per clock(XF_NPPC4) is possible.

Absolute Difference

API Syntax

The absdiff function finds the pixel wise absolute difference between two input images and returns an output image. The input and the output images must be the XF_8UC1 type.



Where,
  • Iout(x, y) is the intensity of output image at (x,y) position.
  • Iin1(x, y) is the intensity of first input image at (x,y) position.
  • Iin2(x, y) is the intensity of second input image at (x,y) position.
template<int SRC_T, int ROWS, int COLS, int NPC=1>
void absdiff(
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1,
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2,
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 11. absdiff Function Parameter Descriptions
Parameter Description
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC

Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 12. absdiff Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 67 17
8 pixel 150 0 0 67 234 39

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 13. absdiff Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.69

Deviation from OpenCV

There is no deviation from OpenCV, except that the absdiff function supports 8-bit pixels.

Accumulate

The accumulate function adds an image (src1) to the accumulator image (src2), and generates the accumulated result image (dst).

API Syntax

template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1> 
void accumulate (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int DST_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 14. accumulate Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type. Only 16-bit, unsigned, 1 and 3 channels are supported (XF_16UC1 and XF_16UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Recommend using a multiple of 8, for an 8-pixel operation.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 15. accumulate Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48E FF LUT CLB
1 pixel 300 0 0 62 55 12
8 pixel 150 0 0 389 285 61

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process 4K 3 Channel image.

Table 16. accumulate Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48E FF LUT CLB
1 pixel 300 0 1 207 72 32

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 17. accumulate Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Deviation from OpenCV

In OpenCV the accumulated image is stored in the second input image. The src2 image acts as both input and output, as shown below:

Whereas, in the xfOpenCV implementation, the accumulated image is stored separately, as shown below:



Accumulate Squared

The accumulateSquare function adds the square of an image (src1) to the accumulator image (src2) and generates the accumulated result (dst).



The accumulated result is a separate argument in the function, instead of having src2 as the accumulated result. In this implementation, having a bi-directional accumulator is not possible as the function makes use of streams.

API Syntax

template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1> 
void accumulateSquare (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int DST_T, int ROWS, int COLS, int NPC> dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 18. accumulateSquare Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type. Only 16-bit, unsigned, 1 and 3 channels are supported (XF_16UC1 and XF_16UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 19. accumulateSquare Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48E FF LUT CLB
1 pixel 300 0 1 71 52 14
8 pixel 150 0 8 401 247 48

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process 4K 3 Channel image.

Table 20. accumulateSquare Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48E FF LUT CLB
1 pixel 300 0 3 227 86 37

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 21. accumulateSquare Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.6

Deviation from OpenCV

In OpenCV the accumulated squared image is stored in the second input image. The src2 image acts as input as well as output.



Whereas, in the xfOpenCV implementation, the accumulated squared image is stored separately.

Accumulate Weighted

The accumulateWeighted function computes the weighted sum of the input image (src1) and the accumulator image (src2) and generates the result in dst.



The accumulated result is a separate argument in the function, instead of having src2 as the accumulated result. In this implementation, having a bi-directional accumulator is not possible, as the function uses streams.

API Syntax

template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1> 
void accumulateWeighted (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int DST_T, int ROWS, int COLS, int NPC> dst, 
float alpha )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 22. accumulateWeighted Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type. Only 16-bit, unsigned, 1 and 3 channels are supported (XF_16UC1 and XF_16UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Recommend multiples of 8, for an 8-pixel operation.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image
alpha Weight applied to input image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 23. accumulateWeighted Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 5 295 255 52
8 pixel 150 0 19 556 476 88

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3 Channel image.

Table 24. accumulateWeighted Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 457 387 95

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 25. accumulateWeighted Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Deviation from OpenCV

The resultant image in OpenCV is stored in the second input image. The src2 image acts as input as well as output, as shown below:

Whereas, in xfOpenCV implementation, the accumulated weighted image is stored separately.

AddS

The AddS function performs the addition operation between pixels of input image src and given scalar value scl and stores the result in dst.

dst(x,y)= src(x,y) + scl

Where (x,y) is the spatial coordinate of the pixel.

API Syntax

template<int POLICY_TYPE, int SRC_T, int ROWS, int COLS, int NPC =1>
void addS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)],xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 26. AddS Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First input image
_scl Input scalar value, the size should be number of channels.
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the AddS function in both the resource optimized (8 pixel) mode and normal mode, as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 27. AddS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 100 101
LUT 52 185
CLB 20 45

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 28. AddS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)

1 pixel

300 6.9

8 pixel

150 1.7

Addweighted

The addweighted function calculates a weighted sum of two input images src1, src2 and generates the result in dst.

dst(x,y)= src1(x,y)*alpha+src2(x,y)*beta+ gamma

API Syntax

template< int SRC_T , int DST_T,   int ROWS, int COLS, int NPC=1>
void addWeighted(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, float alpha, xf::Mat<SRC_T, ROWS, COLS, NPC> & _src2, float beta, float gamma, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 29. Addweighted Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned,1 channel is supported (XF_8UC1)
DST_T Output Pixel Type. 8-bit, unsigned,1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First Input image
Alpha Weight applied on first image
_src2 Second Input image
Beta Weight applied on second image
gamma Scalar added to each sum
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Addweighted function in Resource optimized (8 pixel) mode and normal mode, as generated in Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 30. Addweighted Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 11 25
FF 903 680
LUT 851 1077
CLB 187 229

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 31. Addweighted Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)

1 pixel

300 6.9

8 pixel

150 1.7

Bilateral Filter

In general, any smoothing filter smoothens the image which will affect the edges of the image. To preserve the edges while smoothing, a bilateral filter can be used. In an analogous way as the Gaussian filter, the bilateral filter also considers the neighboring pixels with weights assigned to each of them. These weights have two components, the first of which is the same weighing used by the Gaussian filter. The second component takes into account the difference in the intensity between the neighboring pixels and the evaluated one.
The bilateral filter applied on an image is:

Where

and is a gaussian filter with variance .
The gaussian filter is given by:

API Syntax

template<int FILTER_SIZE, int BORDER_TYPE, int TYPE, int ROWS, int COLS, int NPC=1> 
void bilateralFilter (
xf::Mat<int TYPE, int ROWS, int COLS, int NPC> src, 
xf::Mat<int TYPE, int ROWS, int COLS, int NPC> dst,
float sigma_space, float sigma_color )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 32. bilateralFilter Function Parameter Descriptions
Parameter Description
FILTER_SIZE Filter size. Filter size of 3 (XF_FILTER_3X3), 5 (XF_FILTER_5X5) and 7 (XF_FILTER_7X7) are supported
BORDER_TYPE Border type supported is XF_BORDER_CONSTANT
TYPE Input and output pixel type. Only 8-bit, unsigned, 1 channel, and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; this function supports XF_NPPC1 and XF_NPPC8.
src Input image
dst Output image
sigma_space Standard deviation of filter in spatial domain
sigma_color Standard deviation of filter used in color space

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to progress a grayscale HD (1080x1920) image.

Table 33. bilateralFilter Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 3x3 300 6 22 4934 4293
5x5 300 12 30 5481 4943
7x7 300 37 48 7084 6195

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to progress a 4K 3 channel image.

Table 34. bilateralFilter Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 3x3 300 12 32 8342 7442
5x5 300 27 57 10663 8857
7x7 300 49 107 12870 12181

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 35. bilateralFilter Function Performance Estimate Summary
Operating Mode Filter Size Latency Estimate
300 MHz
Max (ms)
1 pixel 3x3 7.18
5x5 7.20
7x7 7.22

Deviation from OpenCV

Unlike OpenCV, xfOpenCV only supports filter sizes of 3, 5 and 7.

Bit Depth Conversion

The convertTo function converts the input image bit depth to the required bit depth in the output image.

API Syntax

template <int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void convertTo(xf::Mat<SRC_T, ROWS, COLS, NPC> &_src_mat, xf::Mat<DST_T, ROWS, COLS, NPC> &_dst_mat, ap_uint<4> _convert_type, int _shift)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 36. convertTo Function Parameter Descriptions
Parameter Description
SRC_T

Input pixel type. 8-bit, unsigned, 1 channel (XF_8UC1),

16-bit, unsigned, 1 channel (XF_16UC1),

16-bit, signed, 1 channel (XF_16SC1),

32-bit, unsigned, 1 channel (XF_32UC1)

32-bit, signed, 1 channel (XF_32SC1) are supported.

DST_T

Output pixel type. 8-bit, unsigned, 1 channel (XF_8UC1),

16-bit, unsigned, 1 channel (XF_16UC1),

16-bit, signed, 1 channel (XF_16SC1),

32-bit, unsigned, 1 channel (XF_32UC1)

32-bit, signed, 1 channel (XF_32SC1) are supported.
ROWS Height of input and output images
COLS Width of input and output images
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively. XF_NPPC8 is not supported with the 32-bit input and output pixel type.
_src_mat Input image
_dst_mat Output image
_convert_type This parameter specifies the type of conversion required. (See XF_convert_bit_depth_e enumerated type in file xf_params.h for possible values.)
_shift Optional scale factor

Possible Conversions

The following table summarizes supported conversions. The rows are possible input image bit depths and the columns are corresponding possible output image bit depths (U=unsigned, S=signed).

Table 37. convertTo Function Supported Conversions
INPUT/OUTPUT U8 U16 S16 U32 S32
U8 NA yes yes NA yes
U16 yes NA NA NA yes
S16 yes NA NA NA yes
U32 NA NA NA NA NA
S32 yes yes yes NA NA

Resource Utilization

The following table summarizes the resource utilization of the convertTo function, generated using Vivado HLS 2019.1 tool for the Xilinx® Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.
Table 38. convertTo Function Resource Utilization Summary For XF_CONVERT_8U_TO_16S Conversion
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 8 581 523 119
8 pixel 150 0 8 963 1446 290
Table 39. convertTo Function Resource Utilization Summary For XF_CONVERT_16U_TO_8U Conversion
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 8 591 541 124
8 pixel 150 0 8 915 1500 308

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 40. convertTo Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency
1 pixel operation (300 MHz) 6.91 ms
8 pixel operation (150 MHz) 1.69 ms

Bitwise AND

The bitwise_and function performs the bitwise AND operation for each pixel between two input images, and returns an output image.
Where,
  • is the intensity of output image at (x, y) position
  • is the intensity of first input image at (x, y) position
  • is the intensity of second input image at (x, y) position

API Syntax

template<int SRC_T, int ROWS, int COLS, int NPC=1> 
void bitwise_and (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 41. bitwise_and Function Parameter Descriptions
Parameter Description
SRC_T Input and output pixel type. Supports 1 channel and 3 channels (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8 pixel mode)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations, respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 42. bitwise_and Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 44 10
8 pixel 150 0 0 59 72 13

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3Channel image

Table 43. bitwise_and Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 155 61 22

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 44. bitwise_and Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Bitwise NOT

The bitwise_not function performs the pixel wise bitwise NOT operation for the pixels in the input image, and returns an output image.
Where,
  • is the intensity of output image at (x, y) position
  • is the intensity of input image at (x, y) position

API Syntax

template<int SRC_T, int ROWS, int COLS, int NPC=1> 
void bitwise_not (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 45. bitwise_not Function Parameter Descriptions
Parameter Description
SRC_T Input and output pixel type. Supports 1 channel and 3 channels (XF_8UC1 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations, respectively.
src Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 46. bitwise_not Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 97 78 20
8 pixel 150 0 0 88 97 21

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3Channel image.

Table 47. bitwise_not Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 155 61 22

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 48. bitwise_not Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Bitwise OR

The bitwise_or function performs the pixel wise bitwise OR operation between two input images, and returns an output image.
Where,
  • is the intensity of output image at (x, y) position
  • is the intensity of first input image at (x, y) position
  • is the intensity of second input image at (x, y) position

API Syntax

template<int SRC_T, int ROWS, int COLS, int NPC=1> 
void bitwise_or (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 49. bitwise_or Function Parameter Descriptions
Parameter Description
SRC_T Input and output pixel type. Supports 1 channel and 3 channels (XF_8UC1 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 50. bitwise_or Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 44 10
8 pixel 150 0 0 59 72 13

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3Channel image

Table 51. bitwise_or Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 155 61 22

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 52. bitwise_or Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Bitwise XOR

The bitwise_xor function performs the pixel wise bitwise XOR operation between two input images, and returns an output image, as shown below:

Where,
  • is the intensity of output image at (x, y) position
  • is the intensity of first input image at (x, y) position
  • is the intensity of second input image at (x, y) position

API Syntax

template<int SRC_T, int ROWS, int COLS, int NPC=1> 
void bitwise_xor(
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2, 
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 53. bitwise_xor Function Parameter Descriptions
Parameter Description
SRC_T Input and output pixel type. Supports 1 channel and 3 channels (XF_8UC1 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image:

Table 54. bitwise_xor Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 44 10
8 pixel 150 0 0 59 72 13

Performance Estimate

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4k Channel image

Table 55. bitwise_xor Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 155 61 22

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image:

Table 56. bitwise_xor Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Box Filter

The boxFilter function performs box filtering on the input image. Box filter acts as a low-pass filter and performs blurring over the image. The boxFilter function or the box blur is a spatial domain linear filter in which each pixel in the resulting image has a value equal to the average value of the neighboring pixels in the image.

API Syntax

template<int BORDER_TYPE,int FILTER_TYPE, int SRC_T, int ROWS, int COLS,int NPC=1,bool USE_URAM=false>
void boxFilter(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst_mat)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 57. boxFilter Function Parameter Descriptions
Parameter Description
FILTER_SIZE

Filter size. Filter size of 3(XF_FILTER_3X3), 5(XF_FILTER_5X5) and 7(XF_FILTER_7X7) are supported
BORDER_TYPE Border Type supported is XF_BORDER_CONSTANT
SRC_T Input and output pixel type. 8-bit, unsigned, 16-bit unsigned and 16-bit signed, 1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
USE_URAM Enable to map storage structures to UltraRAM
_src_mat Input image
_dst_mat Output image

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 58. boxFilter Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 3x3 300 3 1 545 519 104
5x5 300 5 1 876 870 189
7x7 300 7 1 1539 1506 300
8 pixel 3x3 150 6 8 1002 1368 264
5x5 150 10 8 1576 3183 611
7x7 150 14 8 2414 5018 942

The following table summarizes the resource utilization of the kernel in different configurations, generated using the SDx™ 2019.1 tool for the xczu7ev-ffvc1156-2-e FPGA, to process a grayscale 4K (3840x2160) image with UltraRAM enable.

Table 59. boxFilter Function Resource Utilization Summary with UltraRAM enabled
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K URAM DSP_48Es FF LUT
1 pixel 3x3 300 0 1 1 821 521
5x5 300 0 1 1 1204 855
7x7 300 0 1 1 2083 1431
8 pixel 3x3 150 0 3 8 1263 1480
5x5 150 0 5 8 1771 3154
7x7 150 0 7 8 2700 5411

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image:

Table 60. boxFilter Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Filter Size Latency Estimate
Max (ms)
1 pixel 300 3x3 7.2
300 5x5 7.21
300 7x7 7.22
8 pixel 150 3x3 1.7
150 5x5 1.7
150 7x7 1.7

BoundingBox

The boundingbox function highlights the region of interest (ROI) from the input image using below equations.

P(X,Y) ≤ P(xi, yi) ≤ P(X,Y’)
P(X’,Y) ≤ P(xi, yi) ≤ P(X’,Y’)
Where,
  • P(xi, yi) - Current pixel location
  • P(X,Y) - Top left corner of ROI
  • P(X,Y’) - Top right corner of ROI
  • P(X’,Y) - Bottom left corner of ROI
  • P(X’,Y’) - Bottom Right of ROI

API Syntax

template<int SRC_T, int ROWS, int COLS, int MAX_BOXES=1, int NPC=1>
void boundingbox(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat, xf::Rect_<int> *roi , xf::Scalar<4,unsigned char > *color, int num_box)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 61. boundingbox Function Parameter Descriptions
Parameter Description
SRC_T Input pixel Type. Only 8-bit, unsigned, 1 channel and 3 channel is supported (XF_8UC1,XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of NPC.
MAX_BOXES Maximum number of boxes, fixed to 5.
NPC Number of pixels to be processed per cycle, possible options are XF_NPPC1 only.
_src_mat Input image
roi ROI is a xf::Rect object that consists of the left corner of the rectangle along with the height and width of the rectangle.
color The xf::Scalar object consists of color information for each box (ROI).
num_box Number of boxes to be detected should be equal or less than MAX_BOXES.

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 62. boundingbox Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 5 4 2521 1649 409

Performance Estimate

The following table summarizes the performance of the kernel in 1-pixel mode as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a grayscale 4K (2160x3840) image for highlighting 3 different boundaries(480x640, 100x200, 300x300).

Table 63. boundingbox Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 0.15

xfOpenCV Reference:

The xf::boundingbox is complaint with below xfOpenCV function:
void rectangle(Mat& img, Rect rec, const Scalar& color, int thickness=1, int lineType=8, int shift=0 )

Canny Edge Detection

The Canny edge detector finds the edges in an image or video frame. It is one of the most popular algorithms for edge detection. Canny algorithm aims to satisfy three main criteria:

  1. Low error rate: A good detection of only existent edges.
  2. Good localization: The distance between edge pixels detected and real edge pixels have to be minimized.
  3. Minimal response: Only one detector response per edge.

In this algorithm, the noise in the image is reduced first by applying a Gaussian mask. The Gaussian mask used here is the average mask of size 3x3. Thereafter, gradients along x and y directions are computed using the Sobel gradient function. The gradients are used to compute the magnitude and phase of the pixels. The phase is quantized and the pixels are binned accordingly. Non-maximal suppression is applied on the pixels to remove the weaker edges.

Edge tracing is applied on the remaining pixels to draw the edges on the image. In this algorithm, the canny up to non-maximal suppression is in one kernel and the edge linking module is in another kernel. After non-maxima suppression, the output is represented as 2-bit per pixel, Where:

  • 00 - represents the background
  • 01 - represents the weaker edge
  • 11 - represents the strong edge

The output is packed as 8-bit (four 2-bit pixels) in 1 pixel per cycle operation and packed as 16-bit (eight 2-bit pixels) in 8 pixel per cycle operation. For the edge linking module, the input is 64-bit, such 32 pixels of 2-bit are packed into a 64-bit. The edge tracing is applied on the pixels and returns the edges in the image.

API Syntax

The API syntax for Canny is: 
template<int FILTER_TYPE,int NORM_TYPE,int SRC_T,int DST_T, int ROWS, int COLS,int NPC,int NPC1,bool USE_URAM=false>
void Canny(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<DST_T, ROWS, COLS, NPC1> & _dst_mat,unsigned char _lowthreshold,unsigned char _highthreshold)
The API syntax for EdgeTracing is: 
template<int SRC_T, int DST_T, int ROWS, int COLS,int NPC_SRC,int NPC_DST,bool USE_URAM=false>
voidEdgeTracing(xf::Mat<SRC_T, ROWS, COLS, NPC_SRC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC_DST> & _dst)

Parameter Descriptions

The following table describes the xf::Canny template and function parameters:

Table 64. xf::Canny Function Parameter Descriptions
Parameter Description
FILTER_TYPE The filter window dimensions. The options are 3 and 5.
NORM_TYPE The type of norm used. The options for norm type are L1NORM and L2NORM.
SRC_T Input pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1)
DST_T Output pixel type. Only XF_2UC1 is supported. The output in case of NPC=XF_NPPC1 is 8-bit and packing four 2-bit pixel values into 8-bit. The output in case of NPC=XF_NPPC8 is 16-bit, 8-bit, 2-bit pixel values are packing into 16-bit.
ROWS Maximum height of input and output image
COLS Maximum width of input and output image (must be a multiple of 8, in case of 8 pixel mode)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively. In XF_NPPC, the output image pixels are packed and precision is XF_NPPC4. In XF_NPPC8, output pixels precision is XF_NPPC8.
USE_URAM Enable to map some storage structures to URAM
_src_mat Input image
_dst_mat Output image
_lowthreshold The lower value of threshold for binary thresholding.
_highthreshold The higher value of threshold for binary thresholding.

The following table describes the EdgeTracing template and function parameters:

Table 65. EdgeTracing Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type
DST_T Output pixel type
ROWS Maximum height of input and output image
COLS Maximum width of input and output image (must be a multiple of 32)
NPC_SRC Number of pixels to be processed per cycle. Fixed to XF_NPPC32.
NPC_DST Number of pixels to be written to destination. Fixed to XF_NPPC8.
USE_URAM Enable to map storage structures to URAM.
_src Input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of xf::Canny and EdgeTracing in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image for Filter size is 3.

Table 66. xf::Canny and EdgeTracing Function Resource Utilization Summary
Name Resource Utilization
1 pixel 1 pixel 8 pixel 8 pixel Edge Linking Edge Linking
L1NORM,FS:3 L2NORM,FS:3 L1NORM,FS:3 L2NORM,FS:3
300 MHz 300 MHz 150 MHz 150 MHz 300 MHz 150 MHz
BRAM_18K 22 18 36 32 84 84
DSP48E 2 4 16 32 3 3
FF 3027 3507 4899 6208 17600 14356
LUT 2626 3170 6518 9560 15764 14274
CLB 606 708 1264 1871 2955 3241

The following table summarizes the resource utilization of xf::Canny and EdgeTracing in different configurations, generated using SDx 2019.1 tool for the xczu7ev-ffvc1156-2-e FPGA, to process a grayscale 4K image for Filter size is 3.

Table 67. xf::Canny and EdgeTracing Function Resource Utilization Summary with UltraRAM Enable
Name Resource Utilization
1 pixel 1 pixel 8 pixel 8 pixel Edge Linking Edge Linking
L1NORM,FS:3 L2NORM,FS:3 L1NORM,FS:3 L2NORM,FS:3
300 MHz 300 MHz 150 MHz 150 MHz 300 MHz 150 MHz
BRAM_18K 10 8 3 3 4 4
URAM 1 1 15 13 8 8
DSP48E 2 4 16 32 8 8
FF 3184 3749 5006 7174 5581 7054
LUT 2511 2950 6695 9906 4092 6380

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image for L1NORM, filter size is 3 and including the edge linking module.

Table 68. xf::Canny and EdgeTracing Function Performance Estimate Summary
Operating Mode Latency Estimate

Operating Frequency (MHz)

 Latency (ms)
1 pixel 300 10.8
8 pixel 150 8.5

Deviation from OpenCV

In OpenCV Canny function, the Gaussian blur is not applied as a pre-processing step.

Channel Combine

The merge function, merges single channel images into a multi-channel image. The number of channels to be merged should be four.

API Syntax

template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void merge(xf::Mat<SRC_T, ROWS, COLS, NPC> &_src1, xf::Mat<SRC_T, ROWS, COLS, NPC> &_src2, xf::Mat<SRC_T, ROWS, COLS, NPC> &_src3, xf::Mat<SRC_T, ROWS, COLS, NPC> &_src4, xf::Mat<DST_T, ROWS, COLS, NPC> &_dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 69. merge Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1,2 and 3 channel is supported (XF_8UC1)
DST_T Output pixel type. Only 8-bit, unsigned,4 channel is supported (XF_8UC4)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 for 1 pixel operation.
_src1 Input single-channel image
_src2 Input single-channel image
_src3 Input single-channel image
_src4 Input single-channel image
_dst Output multi-channel image

Resource Utilization

The following table summarizes the resource utilization of the merge function, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process 4 single-channel HD (1080x1920) images.

Table 70. merge Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 8 494 386 85

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process 4 single channel HD (1080x1920) images.

Table 71. merge Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency
1 pixel operation (300 MHz) 6.92 ms

Channel Extract

The extractChannel function splits a multi-channel array (32-bit pixel-interleaved data) into several single-channel arrays and returns a single channel. The channel to be extracted is specified by using the channel argument.

The value of the channel argument is specified by macros defined in the xf_channel_extract_e enumerated data type. The following table summarizes the possible values for the xf_channel_extract_e enumerated data type:

Table 72. xf_channel_extract_e Enumerated Data Type Values
Channel Enumerated Type
Unknown XF_EXTRACT_CH_0
Unknown XF_EXTRACT_CH_1
Unknown XF_EXTRACT_CH_2
Unknown XF_EXTRACT_CH_3
RED XF_EXTRACT_CH_R
GREEN XF_EXTRACT_CH_G
BLUE XF_EXTRACT_CH_B
ALPHA XF_EXTRACT_CH_A
LUMA XF_EXTRACT_CH_Y
Cb/U XF_EXTRACT_CH_U
Cr/V/Value XF_EXTRACT_CH_V

API Syntax

template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1> 
void extractChannel(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_mat, uint16_t _channel)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 73. extractChannel Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 4channel is supported (XF_8UC4)
DST_T Output pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8 for 8 pixel mode
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 for 1 pixel operation.
_src_mat Input multi-channel image
_dst_mat Output single channel image
_channel Channel to be extracted (See xf_channel_extract_e enumerated type in file xf_params.h for possible values.)

Resource Utilization

The following table summarizes the resource utilization of the extractChannel function, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4 channel HD (1080x1920) image.

Table 74. extractChannel Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 8 508 354 96

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a 4 channel HD (1080x1920) image.

Table 75. extractChannel Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.92

Color Conversion

The color conversion functions convert one image format to another image format, for the combinations listed in the following table. The rows represent the input formats and the columns represent the output formats. Supported conversions are discussed in the following sections.

Table 76. Supported Color Conversions
I/O Formats RGBA NV12 NV21 IYUV UYVY YUYV YUV4 RGB BGR
RGBA N/A

For details, see the RGBA to NV12

For details, see the RGBA to NV21

For details, see the RGBA/RGB to IYUV

For details, see the RGBA/RGB to YUV4

    
NV12

For details, see the NV12 to RGBA

 N/A For details, see the NV12 to NV21/NV21 to NV12

For details, see the NV12 to IYUV

 For details, see the NV12/NV21 to UYVY/YUYV For details, see the NV12/NV21 to UYVY/YUYV

For details, see the NV12 to YUV4

 For details, see the NV12/NV21 to RGB/ BGR For details, see the NV12/NV21 to RGB/ BGR
NV21

For details, see the NV21 to RGBA

 For details, see the NV12 to NV21/NV21 to NV12 N/A

For details, see the NV21 to IYUV

 For details, see the NV12/NV21 to UYVY/YUYV For details, see the NV12/NV21 to UYVY/YUYV

For details, see the NV21 to YUV4

 For details, see the NV12/NV21 to RGB/ BGR For details, see the NV12/NV21 to RGB/ BGR
IYUV

For details, see the IYUV to RGBA/RGB

For details, see the IYUV to NV12

 N/A

For details, see the IYUV to YUV4

 For details, see the IYUV to RGBA/RGB  
UYVY

For details, see the UYVY to RGBA

For details, see the UYVY to NV12

For details, see the UYVY to IYUV

 N/A    
YUYV

For details, see the YUYV to RGBA

For details, see the YUYV to NV12

For details, see the YUYV to IYUV

 N/A    
YUV4 N/A    
RGB   For details see theRGB/ BGR to NV12/NV21 For details see theRGB/ BGR to NV12/NV21 For details see the RGBA/RGB to IYUV For details see theRGB/BGR to UYVY/YUYV For details see theRGB/BGR to UYVY/YUYV For details see the RGBA/RGB to YUV4   For details see theBGR to RGB / RGB to BGR
BGR   For details see theRGB/ BGR to NV12/NV21 For details see theRGB/ BGR to NV12/NV21   For details see the RGB/BGR to UYVY/YUYV For details see the RGB/BGR to UYVY/YUYV   For details see theBGR to RGB / RGB to BGR  

Other conversions

Few other conversions are also added. BGR/RGB<->HSV,BGR/RGB<->HLS,BGR/RGB<->YCrCb,BGR/RGB<->XYZ and RGB<->BGR conversions are added.

RGB to YUV Conversion Matrix

Following is the formula to convert RGB data to YUV data:

YUV to RGB Conversion Matrix

Following is the formula to convert YUV data to RGB data:

Source: http://www.fourcc.org/fccyvrgb.php

RGBA/RGB to YUV4

The rgba2yuv4 function converts a 4-channel RGBA image to YUV444 format and the rgb2yuv4 function converts a 3-channel RGB image to YUV444 format. The function outputs Y, U, and V streams separately.

API Syntax
template <int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void rgba2yuv4(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image, xf::Mat<DST_T, ROWS, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS, COLS, NPC> & _v_image)
template <int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void rgb2yuv4(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image, xf::Mat<DST_T, ROWS, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 77. (rgba/rgb)2yuv4 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 4(RGBA) and 3(RGB)-channel are supported (XF_8UC4 and XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input Y plane of size (ROWS, COLS).
_y_image Output Y image of size (ROWS, COLS).
_u_image Output U image of size (ROWS, COLS).
_v_image Output V image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of RGBA/RGB to YUV4 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 78. (rgba/rgb)2yuv4 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 589 328 96
Performance Estimate

The following table summarizes the performance of RGBA/RGB to YUV4 for different configurations, as generated using the Vivado HLS 2019.1 version for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 79. (rgba/rgb)2yuv4 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 1.89

RGBA/RGB to IYUV

The rgba2iyuv function converts a 4-channel RGBA image to IYUV (4:2:0) format and the rgb2iyuv function converts a 3-channel RGB image to IYUV (4:2:0) format. The function outputs Y, U, and V planes separately. IYUV holds subsampled data, Y is sampled for every RGBA/RGB pixel and U,V are sampled once for 2row and 2column(2x2) pixels. U and V planes are of (rows/2)*(columns/2) size, by cascading the consecutive rows into a single row the planes size becomes (rows/4)*columns.

API Syntax
template <int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void rgba2iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _v_image)
template <int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void rgb2iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 80. (rgba/rgb)2iyuv Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit,unsigned, 4(RGBA) and 3(RGB)-channel are supported (XF_8UC4 and XF_8UC3).
DST_T Output pixel type. Only 8-bit,unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input Y plane of size (ROWS, COLS).
_y_image Output Y image of size (ROWS, COLS).
_u_image Output U image of size (ROWS/4, COLS).
_v_image Output V image of size (ROWS/4, COLS).
Resource Utilization

The following table summarizes the resource utilization of RGBA/RGB to IYUV for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 81. (rgba/rgb)2iyuv Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 816 472 149
Performance Estimate

The following table summarizes the performance of RGBA/RGB to IYUV for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 82. (rgba/rgb)2iyuv Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 1.8

RGBA to NV12

The rgba2nv12 function converts a 4-channel RGBA image to NV12 (4:2:0) format. The function outputs Y plane and interleaved UV plane separately. NV12 holds the subsampled data, Y is sampled for every RGBA pixel and U, V are sampled once for 2row and 2columns (2x2) pixels. UV plane is of (rows/2)*(columns/2) size as U and V values are interleaved.

API Syntax
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1>
void rgba2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC> & _uv)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 83. rgba2nv12 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit,unsigned, 4-channel is supported (XF_8UC4).
Y_T Output pixel type. Only 8-bit,unsigned, 1-channel is supported (XF_8UC1).
UV_T Output pixel type. Only 8-bit,unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input RGBA image of size (ROWS, COLS).
_y Output Y image of size (ROWS, COLS).
_uv Output UV image of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of RGBA to NV12 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 84. rgba2nv12 Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 802 452 128
Performance Estimate

The following table summarizes the performance of RGBA to NV12 for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 85. rgba2nv12 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 1.8

RGBA to NV21

The rgba2nv21 function converts a 4-channel RGBA image to NV21 (4:2:0) format. The function outputs Y plane and interleaved VU plane separately. NV21 holds subsampled data, Y is sampled for every RGBA pixel and U, V are sampled once for 2 row and 2 columns (2x2) RGBA pixels. UV plane is of (rows/2)*(columns/2) size as V and U values are interleaved.

API Syntax
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1>
void rgba2nv21(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC> & _uv)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 86. rgba2nv21 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 4-channel is supported (XF_8UC4).
Y_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input RGBA image of size (ROWS, COLS).
_y Output Y image of size (ROWS, COLS).
_uv Output UV image of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of RGBA to NV21 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 87. rgba2nv21 Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 802 453 131
Performance Estimate

The following table summarizes the performance of RGBA to NV21 for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 88. rgba2nv21 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 1.89

YUYV to RGBA

The yuyv2rgba function converts a single-channel YUYV (YUV 4:2:2) image format to a 4-channel RGBA image. YUYV is a sub-sampled format, a set of YUYV value gives 2 RGBA pixel values. YUYV is represented in 16-bit values where as, RGBA is represented in 32-bit values.

API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void yuyv2rgba(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 89. yuyv2rgba Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 4-channel is supported (XF_8UC4).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 incase of 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_dst Output image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of YUYV to RGBA for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 90. yuyv2rgba Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 6 765 705 165
Performance Estimate

The following table summarizes the performance of UYVY to RGBA for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 91. yuyv2rgba Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

YUYV to NV12

The yuyv2nv12 function converts a single-channel YUYV (YUV 4:2:2) image format to NV12 (YUV 4:2:0) format. YUYV is a sub-sampled format, 1 set of YUYV value gives 2 Y values and 1 U and V value each.

API Syntax
template<int SRC_T,int Y_T,int UV_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>
void yuyv2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<Y_T, ROWS, COLS, NPC> & _y_image,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 92. yuyv2nv12 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
Y_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output UV image pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_y_image Output Y plane of size (ROWS, COLS).
_uv_image Output U plane of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of YUYV to NV12 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 93. yuyv2nv12 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 831 491 149
8 pixel 150 0 0 1196 632 161
Performance Estimate

The following table summarizes the performance of YUYV to NV12 for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 94. yuyv2nv12 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

YUYV to IYUV

The yuyv2iyuv function converts a single-channel YUYV (YUV 4:2:2) image format to IYUV(4:2:0) format. Outputs of the function are separate Y, U, and V planes. YUYV is a sub-sampled format, 1 set of YUYV value gives 2 Y values and 1 U and V value each. U, V values of the odd rows are dropped as U, V values are sampled once for 2 rows and 2 columns in the IYUV(4:2:0) format.

API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void yuyv2iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 95. yuyv2iyuv Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned,1 channel is supported (XF_16UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel modes.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS/4, COLS).
_v_image Output V plane of size (ROWS/4, COLS).
Resource Utilization

The following table summarizes the resource utilization of YUYV to IYUV for different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 96. yuyv2iyuv Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 835 497 149
8 pixel 150 0 0 1428 735 210
Performance Estimate

The following table summarizes the performance of YUYV to IYUV for different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 97. yuyv2iyuv Function Performance Estimate
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

UYVY to IYUV

The uyvy2iyuv function converts a UYVY (YUV 4:2:2) single-channel image to the IYUV format. The outputs of the functions are separate Y, U, and V planes. UYVY is sub sampled format. One set of UYVY value gives two Y values and one U and V value each.

API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void uyvy2iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _y_image,xf::Mat<DST_T, ROWS/4, COLS, NPC> & _u_image, xf::Mat<DST_T, ROWS/4, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 98. uyvy2iyuv Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS/4, COLS).
_v_image Output V plane of size (ROWS/4, COLS).
Resource Utilization

The following table summarizes the resource utilization of UYVY to IYUV for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 99. uyvy2iyuv Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 835 494 139
8 pixel 150 0 0 1428 740 209
Performance Estimate

The following table summarizes the performance of UYVY to IYUV for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 100. uyvy2iyuv Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

UYVY to RGBA

The uyvy2rgba function converts a UYVY (YUV 4:2:2) single-channel image to a 4-channel RGBA image. UYVY is sub sampled format, 1set of UYVY value gives 2 RGBA pixel values. UYVY is represented in 16-bit values where as RGBA is represented in 32-bit values.

API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void uyvy2rgba(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 101. uyvy2rgba Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_dst Output image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of UYVY to RGBA for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 102. uyvy2rgba Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 6 773 704 160
Performance Estimate

The following table summarizes the performance of UYVY to RGBA for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 103. uyvy2rgba Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.8

UYVY to NV12

The uyvy2nv12 function converts a UYVY (YUV 4:2:2) single-channel image to NV12 format. The outputs are separate Y and UV planes. UYVY is sub sampled format, 1 set of UYVY value gives 2 Y values and 1 U and V value each.

API Syntax
template<int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1, int NPC_UV=1>
void uyvy2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<Y_T, ROWS, COLS, NPC> & _y_image,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 104. uyvy2nv12 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
Y_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output UV image pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS).
_y_image Output Y plane of size (ROWS, COLS).
_uv_image Output U plane of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of UYVY to NV12 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 105. uyvy2nv12 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 831 488 131
8 pixel 150 0 0 1235 677 168
Performance Estimate

The following table summarizes the performance of UYVY to NV12 for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 106. uyvy2nv12 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

IYUV to RGBA/RGB

The iyuv2rgba function converts single channel IYUV (YUV 4:2:0) image to a 4-channel RGBA image and iyuv2rgb function converts single channel IYUV (YUV 4:2:0) image to a 3-channel RGB image . The inputs to the function are separate Y, U, and V planes. IYUV is sub sampled format, U and V values are sampled once for 2 rows and 2 columns of the RGBA/RGB pixels. The data of the consecutive rows of size (columns/2) is combined to form a single row of size (columns).

API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void iyuv2rgba(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_u,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_v, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void iyuv2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_u,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_v, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 107. iyuv2(rgba/rgb) Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 4(RGBA) and 3(RGB)-channel are supported (XF_8UC4 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_u Input U plane of size (ROWS/4, COLS).
src_v Input V plane of size (ROWS/4, COLS).
_dst0 Output RGBA image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of IYUV to RGBA/RGB for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 108. iyuv2(rgba/rgb) Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 2 5 1208 728 196
Performance Estimate

The following table summarizes the performance of IYUV to RGBA/RGB for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 109. iyuv2(rgba/rgb) Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

IYUV to NV12

The iyuv2nv12 function converts single channel IYUV image to NV12 format. The inputs are separate U and V planes. There is no need of processing Y plane as both the formats have a same Y plane. U and V values are rearranged from plane interleaved to pixel interleaved.

API Syntax
template<int SRC_T, int UV_T, int ROWS, int COLS, int NPC =1, int NPC_UV=1>
void iyuv2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_u,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_v,xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 110. iyuv2nv12 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8 for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 4-pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_u Input U plane of size (ROWS/4, COLS).
src_v Input V plane of size (ROWS/4, COLS).
_y_image Output V plane of size (ROWS, COLS).
_uv_image Output UV plane of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of IYUV to NV12 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image..

Table 111. iyuv2nv12 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 12 907 677 158
8 pixel 150 0 12 1591 1022 235
Performance Estimate

The following table summarizes the performance of IYUV to NV12 for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 112. iyuv2nv12 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

IYUV to YUV4

The iyuv2yuv4 function converts a single channel IYUV image to a YUV444 format. Y plane is same for both the formats. The inputs are separate U and V planes of IYUV image and the outputs are separate U and V planes of YUV4 image. IYUV stores subsampled U,V values. YUV format stores U and V values for every pixel. The same U, V values are duplicated for 2 rows and 2 columns (2x2) pixels in order to get the required data in the YUV444 format.

API Syntax
template<int SRC_T, int ROWS, int COLS, int NPC=1>
void iyuv2yuv4(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_u,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & src_v,xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image, xf::Mat<SRC_T, ROWS, COLS, NPC> & _u_image, xf::Mat<SRC_T, ROWS, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 113. iyuv2yuv4 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_u Input U plane of size (ROWS/4, COLS).
src_v Input V plane of size (ROWS/4, COLS).
_y_image Output Y image of size (ROWS, COLS).
_u_image Output U image of size (ROWS, COLS).
_v_image Output V image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of IYUV to YUV4 for different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 114. iyuv2yuv4 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 1398 870 232
8 pixel 150 0 0 2134 1214 304
Performance Estimate

The following table summarizes the performance of IYUV to YUV4 for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 115. iyuv2yuv4 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 13.8
8 pixel operation (150 MHz) 3.4

NV12 to IYUV

The nv122iyuv function converts NV12 format to IYUV format. The function inputs the interleaved UV plane and the outputs are separate U and V planes. There is no need of processing the Y plane as both the formats have a same Y plane. U and V values are rearranged from pixel interleaved to plane interleaved.

API Syntax
template<int SRC_T, int UV_T, int ROWS, int COLS, int NPC=1, int NPC_UV=1>
void nv122iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & _u_image,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 116. nv122iyuv Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8 pixel mode).
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 4-pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS/4, COLS).
_v_image Output V plane of size (ROWS/4, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV12 to IYUV for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 117. nv122iyuv Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 1344 717 208
8 pixel 150 0 1 1961 1000 263
Performance Estimate

The following table summarizes the performance of NV12 to IYUV for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 118. nv122iyuv Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

NV12 to RGBA

The nv122rgba function converts NV12 image format to a 4-channel RGBA image. The inputs to the function are separate Y and UV planes. NV12 holds sub sampled data, Y plane is sampled at unit rate and 1 U and 1 V value each for every 2x2 Y values. To generate the RGBA data, each U and V value is duplicated (2x2) times.

API Syntax
template<int SRC_T, int UV_T, int DST_T, int ROWS, int COLS, int NPC=1>
void nv122rgba(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y,xf::Mat<UV_T, ROWS/2, COLS/2, NPC> & src_uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 119. nv122rgba Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
DST_T Output pixel type. Only 8-bit,unsigned,4channel is supported (XF_8UC4).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_dst0 Output RGBA image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV12 to RGBA for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 120. nv122rgba Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 2 5 1191 708 195
Performance Estimate

The following table summarizes the performance of NV12 to RGBA for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 121. nv122rgba Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

NV12 to YUV4

The nv122yuv4 function converts a NV12 image format to a YUV444 format. The function outputs separate U and V planes. Y plane is same for both the image formats. The UV planes are duplicated 2x2 times to represent one U plane and V plane of the YUV444 image format.

API Syntax
template<int SRC_T,int UV_T, int ROWS, int COLS, int NPC=1, int NPC_UV=1>
void nv122yuv4(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image, xf::Mat<SRC_T, ROWS, COLS, NPC> & _u_image,xf::Mat<SRC_T, ROWS, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 122. nv122yuv4 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8 pixel mode).
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 4-pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS, COLS).
_v_image Output V plane of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV12 to YUV4 for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 123. nv122yuv4 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 1383 832 230
8 pixel 150 0 0 1772 1034 259
Performance Estimate

The following table summarizes the performance of NV12 to YUV4 for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 124. nv122yuv4 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 13.8
8 pixel operation (150 MHz) 3.4

NV21 to IYUV

The nv212iyuv function converts a NV21 image format to an IYUV image format. The input to the function is the interleaved VU plane only and the outputs are separate U and V planes. There is no need of processing Y plane as both the formats have same the Y plane. U and V values are rearranged from pixel interleaved to plane interleaved.

API Syntax
template<int SRC_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>
void nv212iyuv(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image, xf::Mat<SRC_T, ROWS/4, COLS, NPC> & _u_image,xf::Mat<SRC_T, ROWS/4, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 125. nv212iyuv Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image .
COLS Maximum width of input and output image. Must be a multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 4-pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS/4, COLS).
_v_image Output V plane of size (ROWS/4, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV21 to IYUV for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 126. nv212iyuv Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 1377 730 219
8 pixel 150 0 1 1975 1012 279
Performance Estimate

The following table summarizes the performance of NV21 to IYUV for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 127. nv212iyuv Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

NV21 to RGBA

The nv212rgba function converts a NV21 image format to a 4-channel RGBA image. The inputs to the function are separate Y and VU planes. NV21 holds sub sampled data, Y plane is sampled at unit rate and one U and one V value each for every 2x2 Yvalues. To generate the RGBA data, each U and V value is duplicated (2x2) times.

API Syntax
template<int SRC_T, int UV_T, int DST_T, int ROWS, int COLS, int NPC=1>
void nv212rgba(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC> & src_uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 128. nv212rgba Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
DST_T Output pixel type. Only 8-bit, unsigned, 4-channel is supported (XF_8UC4).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be a multiple of 8, incase of 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_dst0 Output RGBA image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV21 to RGBA for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 129. nv212rgba Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 2 5 1170 673 183
Performance Estimate

The following table summarizes the performance of NV12 to RGBA for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 130. nv212rgba Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

NV21 to YUV4

The nv212yuv4 function converts an image in the NV21 format to a YUV444 format. The function outputs separate U and V planes. Y plane is same for both formats. The UV planes are duplicated 2x2 times to represent one U plane and V plane of YUV444 format.

API Syntax
template<int SRC_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>
void nv212yuv4(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv, xf::Mat<SRC_T, ROWS, COLS, NPC> & _y_image, xf::Mat<SRC_T, ROWS, COLS, NPC> & _u_image, xf::Mat<SRC_T, ROWS, COLS, NPC> & _v_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 131. nv212yuv4 Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8 pixel mode).
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
NPC_UV Number of UV image Pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC4 for 1 pixel and 4-pixel operations respectively.
src_y Input Y plane of size (ROWS, COLS).
src_uv Input UV plane of size (ROWS/2, COLS/2).
_y_image Output Y plane of size (ROWS, COLS).
_u_image Output U plane of size (ROWS, COLS).
_v_image Output V plane of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV21 to YUV4 for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 132. nv212yuv4 Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 1383 817 233
8 pixel 150 0 0 1887 1087 287
Performance Estimate

The following table summarizes the performance of NV21 to YUV4 for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 133. nv212yuv4 Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 13.8
8 pixel operation (150 MHz) 3.5

RGB to GRAY

The rgb2gray function converts a 3-channel RGB image to GRAY format.

Y= 0.299*R+0.587*G+0.114*B
Where,
  • Y = Gray pixel
  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void rgb2gray(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 134. RGB2GRAY Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image.
NPC Number of pixels to be processed per cycle.
_src RGB input image
_dst GRAY output image
Resource Utilization

The following table summarizes the resource utilization of RGB to GRAY for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 135. RGB2GRAY Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 3 439 280
Performance Estimate

The following table summarizes the performance of RGB to GRAY for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 136. RGB2GRAY Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

BGR to GRAY

The bgr2gray function converts a 3-channel BGR image to GRAY format.

Y= 0.299*R+0.587*G+0.114*B

Where,
  • Y = Gray pixel
  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T, int DST_T, int ROWS, int COLS, int NPC=1>
void bgr2gray(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 137. bgr2gray Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned,1-channel is supported (XF_8UC1).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src BGR input image
_dst GRAY output image
Resource Utilization

The following table summarizes the resource utilization of BGR to GRAY for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 138. bgr2gray Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 3 439 280
Performance Estimate

The following table summarizes the performance of BGR to GRAY for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 139. bgr2gray Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

GRAY to RGB

The gray2rgb function converts a gray intensity image to RGB color format.

R<-Y, G<-Y, B<-Y

  • Y = Gray pixel
  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void gray2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 140. gray2rgb Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src GRAY input image.
_dst RGB output image.
Resource Utilization

The following table summarizes the resource utilization of gray2rgb for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 141. gray2rgb Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 0 156 184
Performance Estimate

The following table summarizes the performance of gray2rgb for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 142. gray2rgb Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

GRAY to BGR

The gray2bgr function converts a gray intensity image to RGB color format.

R<-Y, G<-Y, B<-Y

Where,
  • Y = Gray pixel
  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>
void gray2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 143. gray2bgr Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle;
_src GRAY input image.
_dst BGR output image.
Resource Utilization

The following table summarizes the resource utilization of gray2bgr for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 144. gray2bgr Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 0 156 184
Performance Estimate

The following table summarizes the performance of gray2bgr for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 145. gray2bgr Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

HLS to RGB/BGR

The hls2(rgb/bgr) function converts HLS color space to 3-channel RGB/BGR image.











API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void hls2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void hls2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 146. HLS2RGB/BGR Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src HLS input image.
_dst RGB/BGR output image.
Resource Utilization

The following table summarizes the resource utilization of HLS2RGB/BGRR for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 147. HLS2RGB/BGR Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 3 4366 3096
Performance Estimate

The following table summarizes the performance of HLS2RGB/BGR for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 148. HLS2RGB/BGR Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB to XYZ

The rgb2xyz function converts a 3-channel RGB image to XYZ color space.

  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2xyz(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 149. RGB2XYZ Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported. (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src RGB input image.
_dst XYZ output image.
Resource Utilization

The following table summarizes the resource utilization of RGB to XYZ for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 150. RGB2XYZ Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 8 644 380
Performance Estimate

The following table summarizes the performance of RGB to XYZ for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 151. RGB2XYZ Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

BGR to XYZ

The bgr2xyz function converts a 3-channel BGR image to XYZ color space.

  • R= Red channel
  • G= Green channel
  • B= Blue channel
API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2xyz(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 152. RGB2XYZ Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be a multiple of 8.
COLS Maximum width of input and output image. Must be a multiple of 8.
NPC Number of pixels to be processed per cycle.
_src BGR input image.
_dst XYZ output image.
Resource Utilization

The following table summarizes the resource utilization of BGR to XYZ for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 153. BGR2XYZ Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 8 644 380
Performance Estimate

The following table summarizes the performance of BGR to XYZ for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 154. BGR2XYZ Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB/BGR to YCrCb

The (rgb/bgr)2ycrcb function converts a 3-channel RGB image to YCrCb color space.
  • Y = 0.299*R + 0.587*G + 0.114*B
  • Cr= (R-Y)*0.713+delta
  • Cb= (B-Y)*0.564+delta


API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2ycrcb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2ycrcb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 155. RGB/BGR2YCrCb Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3)
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3)
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle
_src RGB/BGR input image
_dst YCrCb output image
Resource Utilization

The following table summarizes the resource utilization of RGB/BGR2YCrCb for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 156. RGB/BGR2YCrCb Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 5 660 500
Performance Estimate

The following table summarizes the performance of RGB/BGR2YCrCb for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 157. RGB/BGR2YCrCb Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB/BGR to HSV

The (rgb/bgr)2hsv function converts a 3-channel RGB image to HSV color space.







API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2hsv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1> void bgr2hsv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 158. RGB/BGR2HSV Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle
_src RGB/BGR input image
_dst HSV output image
Resource Utilization

The following table summarizes the resource utilization of RGB/BGR2HSV for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 159. RGB/BGR2HSV Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 6 8 1582 1274
Performance Estimate

The following table summarizes the performance of RGB/BGR2HSV for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 160. RGB/BGR2HSV Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB/BGR to HLS

The (rgb/bgr)2hls function converts a 3-channel RGB image to HLS color space.









API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2hls(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2hls(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 161. RGB/BGR2HLS Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src RGB/BGR input image.
_dst HLS output image.
Resource Utilization

The following table summarizes the resource utilization of RGB/BGR2HLS for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 162. RGB/BGR2HLS Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 3 4366 3096
Performance Estimate

The following table summarizes the performance of RGB/BGR2HLS for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 163. RGB/BGR2HLS Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

YCrCb to RGB/BGR

The ycrcb2(rgb/bgr) function converts YCrCb color space to 3-channel RGB/BGR image.

Where,
  • R= Y+1.403*(Cr-delta)
  • G= Y-0.714*(Cr-delta)-0.344*(cb-delta)
  • B= Y+1.773+(Cb-delta)
API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void ycrcb2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void ycrcb2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 164. YCrCb2RGB/BGR Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be a multiple of 8.
COLS Maximum width of input and output image. Must be a multiple of 8.
NPC Number of pixels to be processed per cycle.
_src YCrCb input image.
_dst RGB/BGR output image.
Resource Utilization

The following table summarizes the resource utilization of YCrCb2RGB/BGR for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 165. YCrCb2RGB/BGR Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 4 538 575
Performance Estimate

The following table summarizes the performance of YCrCb2RGB/BGR for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 166. YCrCb2RGB/BGR Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

HSV to RGB/BGR

The hsv2(rgb/bgr) function converts HSV color space to 3-channel RGB/BGR image.











API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void hsv2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void hsv2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 167. HSV2RGB/BGR Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3)
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3)
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle
_src HSV input image
_dst RGB/BGR output image
Resource Utilization

The following table summarizes the resource utilization of HSV2RGB/BGRR for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 168. HSV2RGB/BGR Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 8 1543 1006
Performance Estimate

The following table summarizes the performance of HSV2RGB/BGR for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 169. HSV2RGB/BGR Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

NV12/NV21 to RGB/ BGR

The nv122rgb/nv122bgr/nv212rgb/nv212bgr converts NV12 image format to a 3-channel RGB/BGR image. The inputs to the function are separate Y and UV planes. NV12 holds sub sampled data, Y plane is sampled at unit rate, and 1 U and 1 V value each for every 2x2 Y values. To generate the RGB data, each U and V value is duplicated (2x2) times.

API Syntax
NV122RGB:
template<int SRC_T,int UV_T,int DST_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void nv122rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
NV122BGR:
template<int SRC_T,int UV_T,int DST_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void nv122bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
NV212RGB:
template<int SRC_T,int UV_T,int DST_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void nv212rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
NV212BGR:
template<int SRC_T,int UV_T,int DST_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void nv212bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & src_y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & src_uv, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst0)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 170. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit,unsigned, 1-channel is supported (XF_8UC1).
UV_T Input pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be a multiple of NPC for N pixel mode.
NPC Number of Y Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
NPC_UV Number of UV Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2 and XF_NPPC4.
src_y Y input image of size(ROWS, COLS)
src_uv UV output image of size (ROWS/2, COLS/2).
_dst0 Output UV image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of NV12/NV21 to RGB/ BGR function in Normal mode (1 pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 2 5 339 289 76
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2018.3 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 171. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

NV12 to NV21/NV21 to NV12

The nv122nv21/nv212nv12 function converts a NV12 (YUV4:2:0) to NV21 (YUV4:2:0) or vice versa, where 8-bit Y plane followed by an interleaved U/V plane with 2x2 sub-sampling.

API Syntax
NV122NV21:
template<int SRC_Y,int SRC_UV,int ROWS,int COLS,int NPC=1,int NPC_UV=1>
void nv122nv21(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y,xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv,xf::Mat<SRC_Y, ROWS, COLS, NPC> & out_y,xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & out_uv)
NV212NV12:
template<int SRC_Y, int SRC_UV, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void nv212nv12(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y, xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv, xf::Mat<SRC_Y, ROWS, COLS, NPC> & out_y, xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & out_uv)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 172. Function Parameter Descriptions
Parameter Description
SRC_Y Input Y pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1)
SRC_UV Input UV pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2)
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of N.
NPC_Y Number of Y pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
NPC_UV Number of UV Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2 and XF_NPPC4.
_y Y input image
_uv UV input image
out_y Y output image
out_uv UV output image
Resource Utilization

The following table summarizes the resource utilization of NV122NV21/NV212NV12 function in Normal mode (1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 258 161 61
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 173. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

NV12/NV21 to UYVY/YUYV

The NV12/NV21 to UYVY/YUYV function converts a NV12/NV21 (YUV4:2:0) image to a single-channel YUYV/UYVY (YUV 4:2:2) image format. YUYV is a sub-sampled format. YUYV/UYVY is represented in 16-bit values whereas, RGB is represented in 24-bit values.

API Syntax
NV122UYVY:
template<int SRC_Y, int SRC_UV, int DST_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void nv122uyvy(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y,xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
NV122YUYV:
template<int SRC_Y, int SRC_UV, int DST_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void nv122yuyv(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y, xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
NV212UYVY:
template<int SRC_Y, int SRC_UV, int DST_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void nv212uyvy(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y, xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
NV212YUYV:
 template<int SRC_Y, int SRC_UV, int DST_T,int ROWS, int COLS, int NPC=1,int NPC_UV=1>void nv212yuyv(xf::Mat<SRC_Y, ROWS, COLS, NPC> & _y, xf::Mat<SRC_UV, ROWS/2, COLS/2, NPC_UV> & _uv, xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 174. Function Parameter Descriptions
Parameter Description
SRC_Y Input Y image pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
SRC_UV Input UV image pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
DST_T Output pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of NPC.
NPC Number of pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
NPC_UV Number of pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2 and XF_NPPC4.
_y Y input image
_uv UV input image
_dst UYVY/YUYV output image
Resource Utilization

The following table summarizes the resource utilization of NV12/NV21 to UYVY/YUYV function in Normal mode(1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 1 0 337 201 64
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 175. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

UYVY/YUYV to RGB/BGR

The yuyv2rgb/yuyv2bgr/uyvy2rgb/uyvy2bgr function converts a single-channel YUYV/UYVY (YUV 4:2:2) image format to a 3- channel RGB/BGR image. YUYV/UYVY is a sub-sampled format, a set of YUYV/UYVY values gives 2 RGB pixel values. YUYV/UYVY is represented in 16-bit values whereas, RGB/BGR is represented in 24-bit values

API Syntax
YUYV2RGB:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void yuyv2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
YUYV2BGR:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void yuyv2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
UYVY2RGB
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void uyvy2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
UYVY2BGR:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void uyvy2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 176. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned,1-channel is supported (XF_16UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be a multiple of NPC for N pixel mode.
NPC Number of Y pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
_src Input image of size(ROWS, COLS)
_dst Output image of size (ROWS, COLS).
Resource Utilization

The following table summarizes the resource utilization of UYVY/YUYV to RGB/BGR function in Normal mode(1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 6 444 486 109
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 177. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

UYVY to YUYV/ YUYV to UYVY

The yuyv2uyvy/uyvy2yuyv function converts a YUYV (YUV4:2:2) to UYVY (YUV4:2:2) or vice versa, where 8-bit Y plane followed by an interleaved U/V plane with 2x2 sub sampling.

API Syntax
UYVY2YUYV :
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void uyvy2yuyv(xf::Mat<SRC_T, ROWS, COLS, NPC> & uyvy,xf::Mat<DST_T, ROWS, COLS, NPC> & yuyv)
YUYV2UYVY:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void yuyv2uyvy(xf::Mat<SRC_T, ROWS, COLS, NPC> & yuyv,xf::Mat<DST_T, ROWS, COLS, NPC> & uyvy)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 178. Function Parameter Descriptions
Parameter Description
SRC_T Input Y pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be a multiple of N.
NPC Number of pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
yuyv Input image
uyvy Output image
Resource Utilization

The following table summarizes the resource utilization of UYVY to YUYV/ YUYV to UYVY function in Normal mode (1 pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 1 368 176 109
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a grayscale HD (1080x1920) image.

Table 179. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

UYVY/YUYV to NV21

The UYVY/YUYV2NV21 function converts a single-channel YUYV/UYVY (YUV 4:2:2) image format to NV21 (YUV 4:2:0) format. YUYV/UYVY is a sub-sampled format, 1 set of YUYV/UYVY value gives 2 Y values and 1 U and V value each.

API Syntax
UYVY2NV21:
template<int SRC_T,int Y_T,int UV_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void uyvy2nv21(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<Y_T, ROWS, COLS, NPC> & _y_image,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv_image)
YUYV2NV21:
template<int SRC_T,int Y_T,int UV_T,int ROWS,int COLS,int NPC=1,int NPC_UV=1>void yuyv2nv21(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<Y_T, ROWS, COLS, NPC> & _y_image,xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv_image)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 180. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 16-bit, unsigned,1-channel is supported (XF_16UC1).
Y_T Output Y image pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output UV image pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of NPC.
NPC Number of pixels to be processed per cycle; Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
NPC_UV Number of U, V Pixels to be processed per cycle; Possible options are XF_NPPC1,XF_NPPC2 and XF_NPPC4.
_src Input image
_y_image Y Output image
_uv_image UV Output image
Resource Utilization

The following table summarizes the resource utilization of UYVY/YUYV to NV21 function in Normal mode (1 pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 215 73 42
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 181. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB/ BGR to NV12/NV21

The rgb2nv12/bgr2nv12/rgb2nv21/bgr2nv21 converts a 3-channel RGB/BGR image to NV12/NV21 (4:2:0) format. The function outputs Y plane and interleaved UV/VU plane separately. NV12/NV21 holds the subsampled data, Y is sampled for every RGB/BGR pixel and U, V are sampled once for 2 rows and 2columns (2x2) pixels. UV/VU plane is of (rows/2)*(columns/2) size as U and V values are interleaved.

API Syntax
RGB2NV12
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void rgb2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv)
BGR2NV12
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void bgr2nv12(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv)
RGB2NV21
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void rgb2nv21(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv)
BGR2NV21
template <int SRC_T, int Y_T, int UV_T, int ROWS, int COLS, int NPC=1,int NPC_UV=1>void bgr2nv21(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<Y_T, ROWS, COLS, NPC> & _y, xf::Mat<UV_T, ROWS/2, COLS/2, NPC_UV> & _uv)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 182. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
Y_T Output pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
UV_T Output pixel type. Only 8-bit, unsigned, 2-channel is supported (XF_8UC2).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be a multiple of NPC for N pixel mode.
NPC Number of Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
NPC_UV Number of Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2 and XF_NPPC4
_src RGB input image of size(ROWS,COLS)
_y Output Y image of size (ROWS, COLS).
_uv Output UV image of size (ROWS/2, COLS/2).
Resource Utilization

The following table summarizes the resource utilization of RGB/BGR to NV12/NV21 function in Normal mode (1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 413 279 66
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 183. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

BGR to RGB / RGB to BGR

The bgr2rgb/rgb2bgr function converts a 3-channel BGR to RGB format or RGB to BGR format.

API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 184. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of N.
NPC Number of Pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8.
_src BGR/RGB input image
_dst RGB/BGR output image
Resource Utilization

The following table summarizes the resource utilization of RGB to BGR/ BGR to RGB function in Normal mode (1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA.

Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 317 118 98
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 185. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

RGB/BGR to UYVY/YUYV

The RGB/BGR to UYVY/YUYV function converts a 3- channel RGB/BGR image to a single-channel YUYV/UYVY (YUV 4:2:2) image format. YUYV is a sub-sampled format, 2 RGBA pixel gives set of YUYV/UYVY values. YUYV/UYVY is represented in 16-bit values whereas, RGB is represented in 24-bit values

API Syntax

RGB to UYVY:

template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2uyvy(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
RGB to YUYV:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void rgb2yuyv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
BGR to UYVY:
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2uyvy(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
BGR to YUYV
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void bgr2yuyv(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 186. Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3)
DST_T Output pixel type. Only 16-bit, unsigned, 1-channel is supported (XF_16UC1)
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of NPC.
NPC Number of pixels to be processed per cycle. Possible options are XF_NPPC1,XF_NPPC2,XF_NPPC4 and XF_NPPC8..
_src RGB/BGR input image
_dst UYVY/YUYV output image
Resource Utilization

The following table summarizes the resource utilization of RGB/BGR to UYVY/YUYV function in normal mode(1-Pixel), as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA.

Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 249 203 55
Performance Estimate

The following table summarizes the performance of the kernel in single pixel configuration as generated using Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA to process a HD (1080x1920) image.

Table 187. Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

XYZ to RGB/BGR

The xyz2rgb function converts XYZ color space to 3-channel RGB image.

API Syntax
template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void xyz2rgb(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)template<int SRC_T,int DST_T,int ROWS,int COLS,int NPC=1>void xyz2bgr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst)
Parameter Descriptions

The following table describes the template and the function parameters.

Table 188. XYZ2RGB/BGR Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 3-channel is supported (XF_8UC3).
ROWS Maximum height of input and output image. Must be multiple of 8.
COLS Maximum width of input and output image. Must be multiple of 8.
NPC Number of pixels to be processed per cycle.
_src XYZ input image.
_dst RGB/BGR output image.
Resource Utilization

The following table summarizes the resource utilization of XYZ2RGB/BGR for different configurations, as generated in the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a HD (1080x1920) image.

Table 189. XYZ2RGB/BGR Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 300 0 8 639 401
Performance Estimate

The following table summarizes the performance of XYZ2RGB/BGR for different configurations, as generated using the Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1, to process a HD (1080x1920) image.

Table 190. XYZ2RGB/BGRFunction Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9

Color Thresholding

The colorthresholding function compares the color space values of the source image with low and high threshold values, and returns either 255 or 0 as the output.

API Syntax

template<int SRC_T,int DST_T,int MAXCOLORS, int ROWS, int COLS,int NPC>
          void colorthresholding(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_mat,unsigned char low_thresh[MAXCOLORS*3], unsigned char high_thresh[MAXCOLORS*3])

Parameter Descriptions

The table below describes the template and the function parameters.
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 3 channel is supported (XF_8UC3).
DST_T Output pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1).
MAXCOLORS Maximum number of color values
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be a multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle. Only XF_NPPC1 supported.
_src_mat Input image
_dst_mat Thresholded image
low_thresh Lowest threshold values for the colors
high_thresh Highest threshold values for the colors

Compare

The Compare function performs the per element comparison of pixels in two corresponding images src1, src2 and stores the result in dst.

dst(x,y)=src1(x,y) CMP_OP src2(x,y)
CMP_OP – a flag specifies correspondence between the pixels.
  • XF_CMP_EQ : src1 is equal to src2
  • XF_CMP_GT : src1 is greater than src2
  • XF_CMP_GE : src1 is greater than or equal to src2
  • XF_CMP_LT : src1 is less than src2
  • XF_CMP_LE : src1 is less than or equal to src2
  • XF_CMP_NE : src1 is unequal to src2

If the comparison result is true, then the corresponding element of dst is set to 255; else it is set to 0.

API Syntax

template<int CMP_OP,  int SRC_T , int ROWS, int COLS, int NPC=1>
void compare(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, xf::Mat<SRC_T, ROWS, COLS, NPC> & _src2, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 191. Compare Function Parameter Descriptions
Parameter Description
CMP_OP The flag that specify the relation between the elements needs to be checked
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First input image
_src2 Second input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Compare XF_CMP_NE configuration in Resource optimized (8 pixels) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 192. Compare Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 87 60
LUT 38 84
CLB 16 20

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 193. Compare Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (in ms)

1 pixel

300 6.9

8 pixel

150 1.7

CompareS

The CompareS function performs the comparison of a pixel in the input image (src1) and the given scalar value scl, and stores the result in dst.

dst(x,y)=src1(x,y) CMP_OP scalar
CMP_OP – a flag specifies correspondence between the pixel and the scalar.
  • XF_CMP_EQ : src1 is equal to scl
  • XF_CMP_GT : src1 is greater than scl
  • XF_CMP_GE : src1 is greater than or equal to scl
  • XF_CMP_LT : src1 is less than scl
  • XF_CMP_LE : src1 is less than or equal to scl
  • XF_CMP_NE : src1 is unequal to scl

If the comparison result is true, then the corresponding element of dst is set to 255, else it is set to 0.

API Syntax

template<int CMP_OP,  int SRC_T , int ROWS, int COLS, int NPC=1>
void compareS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)], xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 194. CompareS Function Parameter Descriptions
Parameter Description
CMP_OP The flag that specifying the relation between the elements to be checked
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. In case of N-pixel parallelism, the width should be a multiple of N
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixels operations respectively.
_src1 First input image
_scl Input scalar value, the size should be number of channels
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the CompareS function with XF_CMP_NE configuration in Resource optimized (8 pixels) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA

Table 195. CompareS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 93 93
LUT 39 68
CLB 21 28

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 196. CompareS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)

1 pixel

300 6.9

8 pixel

150 1.7

Crop

The Crop function extracts the region of interest (ROI) from the input image.

P(X,Y) ≤ P(xi, yi) ≤ P(X’,Y’)
  • P(X,Y) - Top left corner of ROI
  • P(X’,Y’) - Bottom Right of ROI

Figure: Crop Function

API Syntax

template<int SRC_T, int ROWS, int COLS,int ARCH_TYPE=0,int NPC=1>
void crop(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<SRC_T, ROWS, COLS, NPC>  &_dst_mat,xf::Rect_<unsigned int> &roi)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 197. Crop Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8 for 8-pixel operation.
ARCH_TYPE Architecture type. 0 resolves to stream implementation and 1 resolves to memory mapped implementation.
NPC Number of pixels to be processed per cycle. NPC should be power of 2.
_src_mat Input image
_dst_mat Output ROI image
roi ROI is a xf::Rect object that consists of the top left corner of the rectangle along with the height and width of the rectangle.

Resource Utilization

The following table summarizes the resource utilization of crop function in normal mode (NPC=1) for 3 ROIs (480x640, 100x200, 300x300) as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA.

Table 198. Crop Function Resource Utilization Summary
Name Resource Utilization
1-pixel per clock operation 8-pixel per clock operation
300 MHz 300MHz
BRAM_18K 6 8
DSP48E 10 10
FF 17482 16995
LUT 16831 15305

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image for 3 ROIs (480x640, 100x200, 300x300).

Table 199. Crop Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 1.7
8 pixel 300 0.6

Multiple ROI Extraction

You can call the xf::crop function multiple times in accel.cpp.

Multiple ROI Extraction Example

void crop_accel(xf::Mat<TYPE, HEIGHT, WIDTH, NPIX> &_src,xf::Mat<TYPE,HEIGHT, WIDTH, NPIX> _dst[NUM_ROI],xf::Rect_<unsigned int> roi[NUM_ROI])
 {xf::crop<TYPE, TYPE, HEIGHT, WIDTH, NPIX>(_src, _dst[0],roi[0]); xf::crop<TYPE, TYPE, HEIGHT, WIDTH, NPIX>(_src, _dst[1],roi[1]); xf::crop<TYPE, TYPE, HEIGHT, WIDTH, NPIX>(_src, _dst[2],roi[2]);}

Custom Convolution

The filter2D function performs convolution over an image using a user-defined kernel.

Convolution is a mathematical operation on two functions f and g, producing a third function, The third function is typically viewed as a modified version of one of the original functions, that gives the area overlap between the two functions to an extent that one of the original functions is translated.

The filter can be unity gain filter or a non-unity gain filter. The filter must be of type XF_16SP. If the co-efficients are floating point, it must be converted into the Qm.n and provided as the input as well as the shift parameter has to be set with the ‘n’ value. Else, if the input is not of floating point, the filter is provided directly and the shift parameter is set to zero.

API Syntax

template<int BORDER_TYPE,int FILTER_WIDTH,int FILTER_HEIGHT, int SRC_T,int DST_T, int ROWS, int COLS,int NPC=1>
void filter2D(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_mat,short int filter[FILTER_HEIGHT*FILTER_WIDTH],unsigned char _shift)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 200. filter2D Function Parameter Descriptions
Parameter Description
BORDER_TYPE Border Type supported is XF_BORDER_CONSTANT
FILTER_HEIGHT Number of rows in the input filter
FILTER_WIDTH Number of columns in the input filter
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type.8-bit unsigned single and 3 channels (XF_8UC1,XF_8UC3) and 16-bit signed single and 3 channels (XF_16SC1,XF_16SC3) supported.
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8, for 8 pixel mode.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_dst_mat Output image
filter The input filter of any size, provided the dimensions should be an odd number. The filter co-efficients either a 16-bit value or a 16-bit fixed point equivalent value.
_shift

The filter must be of type XF_16SP. If the co-efficients are floating point, it must be converted into the Qm.n and provided as the input as well as the shift parameter has to be set with the ‘n’ value. Else, if the input is not of floating point, the filter is provided directly and the shift parameter is set to zero.

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 201. filter2D Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 3x3 300 3 9 1701 1161 269
5x5 300 5 25 3115 2144 524
8 pixel 3x3 150 6 72 2783 2768 638
5x5 150 10 216 3020 4443 1007

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3 Channel image.

Table 202. filter2D Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 3x3 300 18 27 886 801
5x5 300 30 75 1793 1445

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 203. filter2D Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Filter Size Latency Estimate
Max (ms)
1 pixel 300 3x3 7
300 5x5 7.1
8 pixel 150 3x3 1.86
150 5x5 1.86

Delay

In image processing pipelines, it is possible that the inputs to a function with FIFO interfaces are not synchronized. That is, the first data packet for first input might arrive a finite number of clock cycles after the first data packet of the second input. If the function has FIFOs at its interface with insufficient depth, this causes the whole design to stall on hardware. To synchronize the inputs, we provide this function to delay the input packet that arrives early, by a finite number of clock cycles.

API Syntax

template<int MAXDELAY, int SRC_T, int ROWS, int COLS,int NPC=1 >
          void delayMat(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The table below describes the template and the function parameters.
Parameter Description
SRC_T Input and output pixel type
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8 pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
MAXDELAY Maximum delay that the function is to be instantiated for.
_src Input image
_dst Output image

Demosaicing

The Demosaicing function converts a single plane Bayer pattern output, from the digital camera sensors to a color image. This function implements an improved bi-linear interpolation technique proposed by Malvar, He, and Cutler.

Figure: Bayer Mosaic for Color Image

The above figure shows the Bayer mosaic for color image capture in single-CCD digital cameras.

API Syntax

template<int BFORMAT, int SRC_T, int DST_T, int ROWS, int COLS, int NPC,bool USE_URAM=false>
void demosaicing(xf::Mat<SRC_T, ROWS, COLS, NPC> &src_mat, xf::Mat<DST_T, ROWS, COLS, NPC> &dst_mat)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 204. Demosaicing Function Parameter Descriptions
Parameter Description
BFORMAT Input Bayer pattern. XF_BAYER_BG, XF_BAYER_GB, XF_BAYER_GR, and XF_BAYER_RG are the supported values.
SRC_T Input pixel type. 8-bit, unsigned,1 and 3 channel (XF_8UC1 and XF_8UC3) and 16-bit, unsigned, 1 and 3 channel (XF_16UC1 and XF_16UC3) are supported.
DST_T Output pixel type. 8-bit, unsigned, 4 channel (XF_8UC4) and 16-bit, unsigned, 4 channel (XF_16UC4) are supported.
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed. Must be multiple of 8, in case of 8 pixel mode.
NPC Number of pixels to be processed per cycle; single pixel parallelism (XF_NPPC1), two-pixel parallelism (XF_NPPC2) and four-pixel parallelism (XF_NPPC4) are supported. XF_NPPC4 is not supported with XF_16UC1 pixel type.
USE_URAM Enable to map storage structures to UltraRAM.
_src_mat Input image
_dst_mat Output image

Resource Utilization

The following table below shows the resource utilization of the Demosaicing function, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 205. Demosaicing Function Resource Utilization Summary
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K DSP48E FF LUT CLB
1 pixel 300 8 0 1906 1915 412
2 pixel 300 8 0 2876 3209 627
4 pixel 300 8 0 2950 3222 660

The following table shows the resource utilization of the Demosaicing function, generated using SDx 2019.1 version tool for the xczu7ev-ffvc1156-2-e FPGA.

Table 206. Demosaicing Function Resource Utilization Summary with UltraRAM Enabled
Operating Mode Operating Frequency (MHz) Utilization Estimate
BRAM_18K URAM DSP48E FF LUT CLB
1 pixel 300 0 1 0 1366 1339 412

Performance Estimate

The following table shows the performance in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 to process a 4K (3840x2160) image.

Table 207. Demosaicing Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 27.82
2 pixel operation (300 MHz) 13.9
4 pixel operation (300 MHz, 8-bit image only) 6.95

Dilate

During a dilation operation, the current pixel intensity is replaced by the maximum value of the intensity in a nxn neighborhood of the current pixel.



API Syntax

template<int BORDER_TYPE, int TYPE, int ROWS, int COLS,int K_SHAPE,int K_ROWS,int K_COLS, int ITERATIONS, int NPC=1>
void dilate (xf::Mat<TYPE, ROWS, COLS, NPC> & _src, xf::Mat<TYPE, ROWS, COLS, NPC> & _dst,unsigned char _kernel[K_ROWS*K_COLS])

Parameter Descriptions

The following table describes the template and the function parameters.

Table 208. dilate Function Parameter Descriptions
Parameter Description
BORDER_TYPE Border Type supported is XF_BORDER_CONSTANT
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
K_SHAPE Shape of the kernel . The supported kernel shapes are RECT, CROSS, and ELLIPSE.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
K_ROWS Height of the kernel.
K_COLS Width of the kernel.
ITERATIONS Number of times the dilation is applied. Currently supporting for Rectangular shape kernel element.
_src_mat Input image
_dst_mat Output image
_kernel Dilation kernel of size K_ROWS * K_COLS.

Resource Utilization

The following table summarizes the resource utilization of the Dilation function with rectangle shape structuring element in 1 pixel operation and 8 pixel operation, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA for HD (1080X1920) image.

Table 209. dilate Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 3 6
DSP48E 0 0
FF 411 657
LUT 392 1249
CLB 96 255

Performance Estimate

The following table summarizes the resource utilization of the Dilation function with rectangle shape structuring element in 1 pixel operation, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA for 4K 3channel image.

Table 210. dilate Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation
300 MHz
BRAM_18K 18
DSP48E 0
FF 983
LUT 745
CLB 186

The following table summarizes a performance estimate of the Dilation function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 211. dilate Function Performance Estimate Summary
Operating Mode Latency Estimate
Min (ms) Max (ms)

1 pixel (300 MHz)

 7.0 7.0

8 pixel (150 MHz)

 1.87 1.87

Duplicate

When various functions in a pipeline are implemented by a programmable logic, FIFOs are instantiated between two functions for dataflow processing. When the output from one function is consumed by two functions in a pipeline, the FIFOs need to be duplicated. This function facilitates the duplication process of the FIFOs.

API Syntax

template<int SRC_T, int ROWS, int COLS,int NPC=1>
          void duplicateMat(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst1,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst2)

Parameter Descriptions

The table below describes the template and the function parameters.
Parameter Description
SRC_T Input and output pixel type
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle. Possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image
_dst1 Duplicate output for _src
_dst2 Duplicate output for _src

Erode

The erode function finds the minimum pixel intensity in the NXN neighborhood of a pixel and replaces the pixel intensity with the minimum value.



API Syntax

template<int BORDER_TYPE, int TYPE, int ROWS, int COLS,int K_SHAPE,int K_ROWS,int K_COLS, int ITERATIONS, int NPC=1>
void erode (xf::Mat<TYPE, ROWS, COLS, NPC> & _src, xf::Mat<TYPE, ROWS, COLS, NPC> & _dst,unsigned char _kernel[K_ROWS*K_COLS])

Parameter Descriptions

The following table describes the template and the function parameters.

Table 212. erode Function Parameter Descriptions
Parameter Description
BORDER_TYPE Border type supported is XF_BORDER_CONSTANT
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
K_SHAPE Shape of the kernel . The supported kernel shapes are RECT,CROSS and ELLIPSE.
K_ROWS Height of the kernel.
K_COLS Width of the kernel.
ITERATIONS Number of times the erosion is applied.Currently supporting for Rectangular shape kernel element.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_dst_mat Output image
_kernel Erosion kernel of size K_ROWS * K_COLS.

Resource Utilization

The following table summarizes the resource utilization of the Erosion function with rectangular shape structuring element generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA,for FullHD image(1080x1920).

Table 213. erode Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 3 6
DSP48E 0 0
FF 411 657
LUT 392 1249
CLB 96 255

The following table summarizes the resource utilization of the Erosion function with rectangular shape structuring element generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA,for 4K image with 3channels.

Table 214. erode Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation
300 MHz
BRAM_18K 18
DSP48E 0
FF 983
LUT 3745
CLB 186

Performance Estimate

The following table summarizes a performance estimate of the Erosion function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 215. erode Function Performance Estimate Summary
Operating Mode Latency Estimate
Min (ms) Max (ms)

1 pixel (300 MHz)

 7.0 7.0

8 pixel (150 MHz)

 1.85 1.85

FAST Corner Detection

Features from accelerated segment test (FAST) is a corner detection algorithm, that is faster than most of the other feature detectors.

The fast function picks up a pixel in the image and compares the intensity of 16 pixels in its neighborhood on a circle, called the Bresenham's circle. If the intensity of 9 contiguous pixels is found to be either more than or less than that of the candidate pixel by a given threshold, then the pixel is declared as a corner. Once the corners are detected, the non-maximal suppression is applied to remove the weaker corners.

This function can be used for both still images and videos. The corners are marked in the image. If the corner is found in a particular location, that location is marked with 255, otherwise it is zero.

API Syntax

template<int NMS,int SRC_T,int ROWS, int COLS,int NPC=1>
void fast(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst_mat,unsigned char _threshold)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 216. fast Function Parameter Descriptions
Parameter Description
NMS If NMS == 1, non-maximum suppression is applied to detected corners (keypoints). The value should be 0 or 1.
SRC_T Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1)
ROWS Maximum height of input image.
COLS Maximum width of input image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_dst_mat Output image. The corners are marked in the image.
_threshold Threshold on the intensity difference between the center pixel and its neighbors. Usually it is taken around 20.

Resource Utilization

The following table summarizes the resource utilization of the kernel for different configurations, generated using Vivado HLS 2019.1 for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image with NMS.

Table 217. fast Function Resource Utilization Summary

Name

 Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 10 20
DSP48E 0 0
FF 2695 7310
LUT 3792 20956
CLB 769 3519

Performance Estimate

The following table summarizes the performance of kernel for different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image with non-maximum suppression (NMS).

Table 218. fast Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Filter Size Latency Estimate
Max (ms)
1 pixel 300 3x3 7
8 pixel 150 3x3 1.86

Gaussian Filter

The GaussianBlur function applies Gaussian blur on the input image. Gaussian filtering is done by convolving each point in the input image with a Gaussian kernel.



Where , are the mean values and , are the variances in x and y directions respectively. In the GaussianBlur function, values of , are considered as zeroes and the values of , are equal.

API Syntax

template<int FILTER_SIZE, int BORDER_TYPE, int SRC_T, int ROWS, int COLS, int NPC =  1>
void GaussianBlur(xf::Mat<SRC_T, ROWS, COLS, NPC> & src, xf::Mat<SRC_T, ROWS, COLS, NPC> & dst, float sigma)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 219. GaussianBlur Function Parameter Descriptions
Parameter Description
FILTER_SIZE Filter size. Filter size of 3 (XF_FILTER_3X3), 5 (XF_FILTER_5X5) and 7 (XF_FILTER_7X7) are supported.
BORDER_TYPE Border type supported is XF_BORDER_CONSTANT
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible values are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src Input image
dst Output image
sigma Standard deviation of Gaussian filter

Resource Utilization

The following table summarizes the resource utilization of the Gaussian Filter in different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to progress a grayscale HD (1080x1920) image.

Table 220. GaussianBlur Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 3x3 300 3 17 3641 2791 610
5x5 300 5 27 4461 3544 764
7x7 250 7 35 4770 4201 894
8 pixel 3x3 150 6 52 3939 3784 814
5x5 150 10 111 5688 5639 1133
7x7 150 14 175 7594 7278 1518

The following table summarizes the resource utilization of the Gaussian Filter in different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to progress a 4K 3 Channel image.

Table 221. GaussianBlur Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 3x3 300 18 33 4835 3472
5x5 300 30 51 5755 3994
7x7 300 42 135 8086 5422

Performance Estimate

The following table summarizes a performance estimate of the Gaussian Filter in different configurations, as generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 222. GaussianBlur Function Performance Estimate Summary
Operating Mode Filter Size Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 3x3 7.01
5x5 7.03
7x7 7.06
8 pixel operation (150 MHz) 3x3 1.6
5x5 1.7
7x7 1.74

Gradient Magnitude

The magnitude function computes the magnitude for the images. The input images are x-gradient and y-gradient images of type 16S. The output image is of same type as the input image.

For L1NORM normalization, the magnitude computed image is the pixel-wise added image of absolute of x-gradient and y-gradient, as shown below:.



For L2NORM normalization, the magnitude computed image is as follows:



API Syntax

template< int NORM_TYPE ,int SRC_T,int DST_T, int ROWS, int COLS,int NPC=1>
void magnitude(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_matx,xf::Mat<DST_T, ROWS, COLS, NPC> & _src_maty,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_mat)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 223. magnitude Function Parameter Descriptions
Parameter Description
NORM_TYPE Normalization type can be either L1 or L2 norm. Values are XF_L1NORM or XF_L2NORM
SRC_T Input pixel type. Only 16-bit, signed, 1 channel is supported (XF_16SC1)
DST_T Output pixel type. Only 16-bit, signed,1 channel is supported (XF_16SC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible values are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_matx First input, x-gradient image.
_src_maty Second input, y-gradient image.
_dst_mat Output, magnitude computed image.

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image and for L2 normalization.

Table 224. magnitude Function Resource Utilization Summary
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 2 16
FF 707 2002
LUT 774 3666
CLB 172 737

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image and for L2 normalization.

Table 225. magnitude Function Performance Estimate Summary
Operating Mode

Operating Frequency (MHz)

 Latency Estimate
Max (ms)
1 pixel 300 7.2
8 pixel 150 1.7

Gradient Phase

The phase function computes the polar angles of two images. The input images are x-gradient and y-gradient images of type 16S. The output image is of same type as the input image.

For radians:

For degrees:

API Syntax

template<int RET_TYPE ,int SRC_T,int DST_T, int ROWS, int COLS,int NPC=1 >
void phase(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_matx,xf::Mat<DST_T, ROWS, COLS, NPC> & _src_maty,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_mat)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 226. phase Function Parameter Descriptions
Parameter Description
RET_TYPE Output format can be either in radians or degrees. Options are XF_RADIANS or XF_DEGREES.
  • If the XF_RADIANS option is selected, phase API will return result in Q4.12 format. The output range is (0, 2 pi).
  • If the XF_DEGREES option is selected, xFphaseAPI will return result in Q10.6 degrees and output range is (0, 360).
SRC_T Input pixel type. Only 16-bit, signed, 1 channel is supported (XF_16SC1).
DST_T Output pixel type. Only 16-bit, signed, 1 channel is supported (XF_16SC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_matx First input, x-gradient image.
_src_maty Second input, y-gradient image.
_dst_mat Output, phase computed image.

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 227. phase Function Resource Utilization Summary
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 6 24
DSP48E 6 19
FF 873 2396
LUT 753 3895
CLB 185 832

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 228. phase Function Performance Estimate Summary
Operating Mode Operating Frequency (MHz) Latency Estimate (ms)
1 pixel 300 7.2
8 pixel 150 1.7

Deviation from OpenCV

In phase implementation, the output is returned in a fixed point format. If XF_RADIANS option is selected, phase API will return result in Q4.12 format. The output range is (0, 2 pi). If XF_DEGREES option is selected, phase API will return result in Q10.6 degrees and output range is (0, 360).

Harris Corner Detection

In order to understand Harris Corner Detection, let us consider a grayscale image. Sweep a window w(x,y) (with displacements u in the x-direction and v in the y-direction), I calculates the variation of intensity w(x,y).


Where:
  • w(x,y) is the window position at (x,y)
  • I(x,y) is the intensity at (x,y)
  • I(x+u,y+v) is the intensity at the moved window (x+u,y+v).

Since we are looking for windows with corners, we are looking for windows with a large variation in intensity. Hence, we have to maximize the equation above, specifically the term:



Using Taylor expansion:



Expanding the equation and cancelling I(x,y) with -I(x,y):



The above equation can be expressed in a matrix form as:



So, our equation is now:


A score is calculated for each window, to determine if it can possibly contain a corner:



Where,

API Syntax

Non-Maximum Suppression:

In non-maximum suppression (NMS) if radius = 1, then the bounding box is 2*r+1 = 3.

In this case, consider a 3x3 neighborhood across the center pixel. If the center pixel is greater than the surrounding pixel, then it is considered a corner. The comparison is made with the surrounding pixels, which are within the radius.

Radius = 1

x-1, y-1 x-1, y x-1, y+1
x, y-1 x, y x, y+1
x+1, y-1 x+1, y x+1, y+1

Threshold:

A threshold=442, 3109 and 566 is used for 3x3, 5x5, and 7x7 filters respectively. This threshold is verified over 40 sets of images. The threshold can be varied, based on the application. The corners are marked in the output image. If the corner is found in a particular location, that location is marked with 255, otherwise it is zero. 

template<int FILTERSIZE,int BLOCKWIDTH, int NMSRADIUS,int SRC_T,int ROWS, int COLS,int NPC=1,bool USE_URAM=false>
void cornerHarris(xf::Mat<SRC_T, ROWS, COLS, NPC> & src,xf::Mat<SRC_T, ROWS, COLS, NPC> & dst,uint16_t threshold, uint16_t k)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 229. cornerHarris Function Parameter Descriptions
Parameter Description
FILTERSIZE Size of the Sobel filter. 3, 5, and 7 supported.
BLOCKWIDTH Size of the box filter. 3, 5, and 7 supported.
NMSRADIUS Radius considered for non-maximum suppression. Values supported are 1 and 2.
TYPE Input pixel type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input image.
COLS Maximum width of input image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
USE_URAM Enable to map some storage structures to URAM
src Input image
dst Output image.
threshold Threshold applied to the corner measure.
k Harris detector parameter

Resource Utilization

The following table summarizes the resource utilization of the Harris corner detection in different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=3 and NMS_RADIUS =1.

Table 230. Resource Utilization Summary - For Sobel Filter = 3, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 33 66
DSP48E 10 80
FF 3254 9330
LUT 3522 13222
CLB 731 2568

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=5 and NMS_RADIUS =1.

Table 231. Resource Utilization Summary - Sobel Filter = 3, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 45 90
DSP48E 10 80
FF 5455 12459
LUT 5675 24594
CLB 1132 4498

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=7 and NMS_RADIUS =1.

Table 232. Resource Utilization Summary - Sobel Filter = 3, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 57 114
DSP48E 10 80
FF 8783 16593
LUT 9157 39813
CLB 1757 6809

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=3 and NMS_RADIUS =1.

Table 233. Resource Utilization Summary - Sobel Filter = 5, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 200 MHz
BRAM_18K 35 70
DSP48E 10 80
FF 4656 11659
LUT 4681 17394
CLB 1005 3277
The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=5 and NMS_RADIUS =1.
Table 234. Resource Utilization Summary - Sobel Filter = 5, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 47 94
DSP48E 10 80
FF 6019 14776
LUT 6337 28795
CLB 1353 5102

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=7 and NMS_RADIUS =1.

Table 235. Resource Utilization Summary - Sobel Filter = 5, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 59 118
DSP48E 10 80
FF 9388 18913
LUT 9414 43070
CLB 1947 7508

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=3 and NMS_RADIUS =1.

Table 236. Resource Utilization Summary - Sobel Filter = 7, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 37 74
DSP48E 11 88
FF 6002 13880
LUT 6337 25573
CLB 1327 4868

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=5 and NMS_RADIUS =1.

Table 237. Resource Utilization Summary - Sobel Filter = 7, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 49 98
DSP48E 11 88
FF 7410 17049
LUT 8076 36509
CLB 1627 6518

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=7 and NMS_RADIUS =1.

Table 238. Resource Utilization Summary - Sobel Filter = 7, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 61 122
DSP48E 11 88
FF 10714 21137
LUT 11500 51331
CLB 2261 8863

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=3 and NMS_RADIUS =2.

Table 239. Resource Utilization Summary - Sobel Filter = 3, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 41 82
DSP48E 10 80
FF 5519 10714
LUT 5094 16930
CLB 1076 3127
The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=5 and NMS_RADIUS =2.
Table 240. Resource Utilization Summary
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 53 106
DSP48E 10 80
FF 6798 13844
LUT 6866 28286
CLB 1383 4965

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=7 and NMS_RADIUS =2.

Table 241. Resource Utilization Summary - Sobel Filter = 3, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 65 130
DSP48E 10 80
FF 10137 17977
LUT 10366 43589
CLB 1940 7440

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=3 and NMS_RADIUS =2.

Table 242. Resource Utilization Summary - Sobel Filter = 5, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 43 86
DSP48E 10 80
FF 5957 12930
LUT 5987 21187
CLB 1244 3922
The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=5 and NMS_RADIUS =2.
Table 243. Resource Utilization Summary - Sobel Filter = 5, Box filter=5 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 55 110
DSP48E 10 80
FF 5442 16053
LUT 6561 32377
CLB 1374 5871

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=7 and NMS_RADIUS =2.

Table 244. Resource Utilization Summary - Sobel Filter = 5, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 67 134
DSP48E 10 80
FF 10673 20190
LUT 10793 46785
CLB 2260 8013

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=3 and NMS_RADIUS =2.

Table 245. Resource Utilization Summary - Sobel Filter = 7, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 45 90
DSP48E 11 88
FF 7341 15161
LUT 7631 29185
CLB 1557 5425

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=5 and NMS_RADIUS =2.

Table 246. Resource Utilization Summary - Sobel Filter = 7, Box filter=5 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 57 114
DSP48E 11 88
FF 8763 18330
LUT 9368 40116
CLB 1857 7362

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=7 and NMS_RADIUS =2.

Table 247. Resource Utilization Summary - Sobel Filter = 7, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 69 138
DSP48E 11 88
FF 12078 22414
LUT 12831 54652
CLB 2499 9628

Resource Utilization with URAM enable

The following table summarizes the resource utilization of the Harris corner detection in different configurations, generated using SDx 2019.1 version tool for the xczu7ev-ffvc1156-2-e FPGA, to process a grayscale 4K (3840X2160) image.

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=3 and NMS_RADIUS =1.

Table 248. Resource Utilization Summary - For Sobel Filter = 3, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 4 21
DSP48E 10 80
FF 5306 11846
LUT 3696 13846

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=5 and NMS_RADIUS =1.

Table 249. Resource Utilization Summary - Sobel Filter = 3, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 30
DSP48E 10 80
FF 7625 13899
LUT 5596 27136

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=7 and NMS_RADIUS =1.

Table 250. Resource Utilization Summary - Sobel Filter = 3, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 42
DSP48E 10 80
FF 12563 19919
LUT 8816 39087

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=3 and NMS_RADIUS =1.

Table 251. Resource Utilization Summary - Sobel Filter = 5, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 4 23
DSP48E 10 80
FF 6689 15022
LUT 4506 18719
The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=5 and NMS_RADIUS =1.
Table 252. Resource Utilization Summary - Sobel Filter = 5, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 32
DSP48E 10 80
FF 9050 17063
LUT 6405 31992

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=7 and NMS_RADIUS =1.

Table 253. Resource Utilization Summary - Sobel Filter = 5, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 44
DSP48E 10 80
FF 13946 23116
LUT 9626 44738

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=3 and NMS_RADIUS =1.

Table 254. Resource Utilization Summary - Sobel Filter = 7, Box filter=3 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 4 25
DSP48E 11 88
FF 8338 17378
LUT 6151 24844

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=5 and NMS_RADIUS =1.

Table 255. Resource Utilization Summary - Sobel Filter = 7, Box filter=5 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 34
DSP48E 11 88
FF 10497 19457
LUT 7858 39762

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=7 and NMS_RADIUS =1.

Table 256. Resource Utilization Summary - Sobel Filter = 7, Box filter=7 and NMS_RADIUS =1
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 12 12
URAM 7 46
DSP48E 11 88
FF 15393 25450
LUT 11080 50662

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=3 and NMS_RADIUS =2.

Table 257. Resource Utilization Summary - Sobel Filter = 3, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 4 21
DSP48E 10 80
FF 6286 13441
LUT 4704 18072
The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=5 and NMS_RADIUS =2.
Table 258. Resource Utilization Summary
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 30
DSP48E 10 80
FF 8626 15498
LUT 6606 31371

The following table summarizes the resource utilization for Sobel Filter = 3, Box filter=7 and NMS_RADIUS =2.

Table 259. Resource Utilization Summary - Sobel Filter = 3, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 42
DSP48E 10 80
FF 13543 21522
LUT 9853 43301

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=3 and NMS_RADIUS =2.

Table 260. Resource Utilization Summary - Sobel Filter = 5, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 4 23
DSP48E 10 80
FF 7670 16750
LUT 5513 22854
The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=5 and NMS_RADIUS =2.
Table 261. Resource Utilization Summary - Sobel Filter = 5, Box filter=5 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 32
DSP48E 10 80
FF 9712 18793
LUT 7338 36136

The following table summarizes the resource utilization for Sobel Filter = 5, Box filter=7 and NMS_RADIUS =2.

Table 262. Resource Utilization Summary - Sobel Filter = 5, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 44
DSP48E 10 80
FF 14650 24846
LUT 10558 48866

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=3 and NMS_RADIUS =2.

Table 263. Resource Utilization Summary - Sobel Filter = 7, Box filter=3 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 4 25
DSP48E 11 88
FF 9562 19101
LUT 7405 29986

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=5 and NMS_RADIUS =2.

Table 264. Resource Utilization Summary - Sobel Filter = 7, Box filter=5 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 34
DSP48E 11 88
FF 11751 21180
LUT 9254 44024

The following table summarizes the resource utilization for Sobel Filter = 7, Box filter=7 and NMS_RADIUS =2.

Table 265. Resource Utilization Summary - Sobel Filter = 7, Box filter=7 and NMS_RADIUS =2
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 20 20
URAM 7 46
DSP48E 11 88
FF 16723 27156
LUT 12474 54858

Performance Estimate

The following table summarizes a performance estimate of the Harris corner detection in different configurations, as generated using Vivado HLS 2019.1 tool for Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 266. cornerHarris Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Configuration Latency Estimate
Sobel Box NMS Radius Latency(In ms)
1 pixel 300 MHz 3 3 1 7
1 pixel 300 MHz 3 5 1 7.1
1 pixel 300 MHz 3 7 1 7.1
1 pixel 300 MHz 5 3 1 7.2
1 pixel 300 MHz 5 5 1 7.2
1 pixel 300 MHz 5 7 1 7.2
1 pixel 300 MHz 7 3 1 7.22
1 pixel 300 MHz 7 5 1 7.22
1 pixel 300 MHz 7 7 1 7.22
8 pixel 150 MHz 3 3 1 1.7
8 pixel 150 MHz 3 5 1 1.7
8 pixel 150 MHz 3 7 1 1.7
8 pixel 150 MHz 5 3 1 1.71
8 pixel 150 MHz 5 5 1 1.71
8 pixel 150 MHz 5 7 1 1.71
8 pixel 150 MHz 7 3 1 1.8
8 pixel 150 MHz 7 5 1 1.8
8 pixel 150 MHz 7 7 1 1.8
1 pixel 300 MHz 3 3 2 7.1
1 pixel 300 MHz 3 5 2 7.1
1 pixel 300 MHz 3 7 2 7.1
1 pixel 300 MHz 5 3 2 7.21
1 pixel 300 MHz 5 5 2 7.21
1 pixel 300 MHz 5 7 2 7.21
1 pixel 300 MHz 7 3 2 7.22
1 pixel 300 MHz 7 5 2 7.22
1 pixel 300 MHz 7 7 2 7.22
8 pixel 150 MHz 3 3 2 1.8
8 pixel 150 MHz 3 5 2 1.8
8 pixel 150 MHz 3 7 2 1.8
8 pixel 150 MHz 5 3 2 1.81
8 pixel 150 MHz 5 5 2 1.81
8 pixel 150 MHz 5 7 2 1.81
8 pixel 150 MHz 7 3 2 1.9
8 pixel 150 MHz 7 5 2 1.91
8 pixel 150 MHz 7 7 2 1.92

Deviation from OpenCV

In xfOpenCV thresholding and NMS are included, but in OpenCV they are not included. In xfOpenCV, all the blocks are implemented in fixed point. Whereas, in OpenCV, all the blocks are implemented in floating point.

Histogram Computation

The calcHist function computes the histogram of given input image.

Where, H is the array of 256 elements.

API Syntax

template<int SRC_T,int ROWS, int COLS,int NPC=1>
void calcHist(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, uint32_t *histogram)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 267. calcHist Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle
_src Input image
histogram Output array of 256 elements

Resource Utilization

The following table summarizes the resource utilization of the calcHist function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz for 1 pixel case and at 150 MHz for 8 pixel mode.

Table 268. calcHist Function Resource Utilization Summary
Name Resource Utilization

Normal Operation (1 pixel)

Resource Optimized (8 pixel)
BRAM_18K 2 16
DSP48E 0 0
FF 196 274
LUT 240 912
CLB 57 231

The following table summarizes the resource utilization of the calcHist function for Normal Operation (1 pixel), generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz for 1 pixel case for 4K image 3channel .

Table 269. calcHist Function Resource Utilization Summary
Name Resource Utilization

Normal Operation (1 pixel)
BRAM_18K 8
DSP48E 0
FF 381
LUT 614
CLB 134

Performance Estimate

The following table summarizes a performance estimate of the calcHist function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz for 1 pixel and 150 MHz for 8 pixel mode.

Table 270. calcHist Function Performance Estimate Summary
Operating Mode Latency Estimate
Max (ms)
1 pixel 6.9
8 pixel 1.7

Histogram Equalization

The equalizeHist function performs histogram equalization on input image or video. It improves the contrast in the image, to stretch out the intensity range. This function maps one distribution (histogram) to another distribution (a wider and more uniform distribution of intensity values), so the intensities are spread over the whole range.

For histogram H[i], the cumulative distribution H'[i] is given as:



The intensities in the equalized image are computed as:



API Syntax

template<int SRC_T, int ROWS, int COLS, int NPC = 1>
void equalizeHist(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 271. equalizeHist Function Parameter Descriptions
Parameter Description
SRC_T Input and output pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle
_src Input image
_src1 Input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the equalizeHist function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz for 1 pixel and 150 MHz for 8 pixel mode.

Table 272. equalizeHist Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 4 5 3492 1807 666
8 pixel 150 25 5 3526 2645 835

Performance Estimate

The following table summarizes a performance estimate of the equalizeHist function for Normal Operation (1 pixel) and Resource Optimized (8 pixel) configurations, generated using Vivado HLS 2019.1version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz for 1 pixel and 150 MHz for 8 pixel mode.

Table 273. equalizeHist Function Performance Estimate Summary
Operating Mode Latency Estimate
Max (ms)
1 pixel per clock operation 13.8

8 pixel per clock operation

 3.4

HOG

The histogram of oriented gradients (HOG) is a feature descriptor used in computer vision for the purpose of object detection. The feature descriptors produced from this approach is widely used in the pedestrian detection.

The technique counts the occurrences of gradient orientation in localized portions of an image. HOG is computed over a dense grid of uniformly spaced cells and normalized over overlapping blocks, for improved accuracy. The concept behind HOG is that the object appearance and shape within an image can be described by the distribution of intensity gradients or edge direction.

Both RGB and gray inputs are accepted to the function. In the RGB mode, gradients are computed for each plane separately, but the one with the higher magnitude is selected. With the configurations provided, the window dimensions are 64x128, block dimensions are 16x16.

API Syntax

template<int WIN_HEIGHT, int WIN_WIDTH, int WIN_STRIDE, int BLOCK_HEIGHT, int BLOCK_WIDTH, int CELL_HEIGHT, int CELL_WIDTH, int NOB, int DESC_SIZE, int IMG_COLOR, int OUTPUT_VARIANT, int SRC_T, int DST_T, int ROWS, int COLS, int NPC = XF_NPPC1,bool USE_URAM=false>
void HOGDescriptor(xf::Mat<SRC_T, ROWS, COLS, NPC> &_in_mat, xf::Mat<DST_T, 1, DESC_SIZE, NPC> &_desc_mat);

Parameter Descriptions

The following table describes the template parameters.

Table 274. HOGDescriptor Template Parameter Descriptions
Parameters Description
WIN_HEIGHT The number of pixel rows in the window. This must be a multiple of 8 and should not exceed the number of image rows.
WIN_WIDTH The number of pixel cols in the window. This must be a multiple of 8 and should not exceed the number of image columns.
WIN_STRIDE The pixel stride between two adjacent windows. It is fixed at 8.
BLOCK_HEIGHT Height of the block. It is fixed at 16.
BLOCK_WIDTH Width of the block. It is fixed at 16.
CELL_HEIGHT Number of rows in a cell. It is fixed at 8.
CELL_WIDTH Number of cols in a cell. It is fixed at 8.
NOB Number of histogram bins for a cell. It is fixed at 9
DESC_SIZE The size of the output descriptor.
IMG_COLOR The type of the image, set as either XF_GRAY or XF_RGB
OUTPUT_VARIENT Must be either XF_HOG_RB or XF_HOG_NRB
SRC_T Input pixel type. Must be either XF_8UC1 or XF_8UC4, for gray and color respectively.
DST_T Output descriptor type. Must be XF_32UC1.
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed.
NPC Number of pixels to be processed per cycle; this function supports only XF_NPPC1 or 1 pixel per cycle operations.
USE_URAM Enable to map UltraRAM instead of BRAM for some storage structures.

The following table describes the function parameters.

Table 275. HOGDescriptor Function Parameter Descriptions
Parameters Description
_in_mat Input image, of xf::Mat type
_desc_mat Output descriptors, of xf::Mat type
Where,
  • NO is normal operation (single pixel processing)
  • RB is repetitive blocks (descriptor data are written window wise)
  • NRB is non-repetitive blocks (descriptor data are written block wise, in order to reduce the number of writes).
Note: In the RB mode, the block data is written to the memory taking the overlap windows into consideration. In the NRB mode, the block data is written directly to the output stream without consideration of the window overlap. In the host side, the overlap must be taken care.

Resource Utilization

The following table shows the resource utilization of HOGDescriptor function for normal operation (1 pixel) mode as generated in Vivado HLS 2019.1 version tool for the part Xczu9eg-ffvb1156-1-i-es1 at 300 MHz to process an image of 1920x1080 resolution.

Table 276. HOGDescriptor Function Resource Utilization Summary
Resource Utilization (at 300 MHz) of 1 pixel operation
NRB RB
Gray RGB Gray RGB
BRAM_18K 43 49 171 177
DSP48E 34 46 36 48
FF 15365 15823 15205 15663
LUT 12868 13267 13443 13848

The following table shows the resource utilization of HOGDescriptor function for normal operation (1 pixel) mode as generated in SDx 2019.1 version tool for the part xczu7ev-ffvc1156-2-e at 300 MHz to process an image of 1920x1080 resolution with UltraRAM enabled.

Table 277. HOGDescriptor Function Resource Utilization Summary with UltraRAM enabled
Resource Utilization (at 300 MHz) of 1 pixel operation
NRB RB
Gray RGB Gray RGB
BRAM_18K 10 12 18 20
URAM 15 15 15 17
DSP48E 34 46 36 48
FF 17285 17917 18270 18871
LUT 12409 12861 12793 13961

Performance Estimate

The following table shows the performance estimates of HOGDescriptor() function for different configurations as generated in Vivado HLS 2019.1 version tool for the part Xczu9eg-ffvb1156-1-i-es1 to process an image of 1920x1080p resolution.

Table 278. HOGDescriptor Function Performance Estimate Summary
Operating Mode Operating Frequency (MHz) Latency Estimate
Min (ms) Max (ms)
NRB-Gray 300 6.98 8.83
NRB-RGBA 300 6.98 8.83
RB-Gray 300 176.81 177
RB-RGBA 300 176.81 177

Deviations from OpenCV

Listed below are the deviations from the OpenCV:
  1. Border care

    The border care that OpenCV has taken in the gradient computation is BORDER_REFLECT_101, in which the border padding will be the neighboring pixels' reflection. Whereas, in the Xilinx implementation, BORDER_CONSTANT (zero padding) was used for the border care.

  2. Gaussian weighing

    The Gaussian weights are multiplied on the pixels over the block, that is a block has 256 pixels, and each position of the block are multiplied with its corresponding Gaussian weights. Whereas, in the HLS implementation, gaussian weighing was not performed.

  3. Cell-wise interpolation
    The magnitude values of the pixels are distributed across different cells in the blocks but on the corresponding bins.

    Pixels in the region 1 belong only to its corresponding cells, but the pixels in region 2 and 3 are interpolated to the adjacent 2 cells and 4 cells respectively. This operation was not performed in the HLS implementation.
  4. Output handling

    The output of the OpenCV will be in the column major form. In the HLS implementation, output will be in the row major form. Also, the feature vector will be in the fixed point type Q0.16 in the HLS implementation, while in the OpenCV it will be in floating point.

Limitations

  1. The configurations are limited to Dalal's implementation
  2. Image height and image width must be a multiple of cell height and cell width respectively.

HoughLines

The HoughLines function here is equivalent to HoughLines Standard in OpenCV. The HoughLines function is used to detect straight lines in a binary image. To apply the Hough transform, edge detection preprocessing is required. The input to the Hough transform is an edge detected binary image. For each point (xi,yi) in a binary image, we define a family of lines that go through the point as:
rho= xi cos(theta) + yi sin(theta)

Each pair of (rho,theta) represents a line that passes through the point (xi,yi). These (rho,theta) pairs of this family of lines passing through the point form a sinusoidal curve in (rho,theta) plane. If the sinusoids of N different points intersect in the (rho,theta) plane, then that intersection (rho1, theta1) represents the line that passes through these N points. In the HoughLines function, an accumulator is used to keep the count (also called voting) of all the intersection points in the (rho,theta) plane. After voting, the function filters spurious lines by performing thinning, that is, checking if the center vote value is greater than the neighborhood votes and threshold, then making that center vote as valid and other wise making it zero. Finally, the function returns the desired maximum number of lines (LINESMAX) in (rho,theta) form as output.

The design assumes the origin at the center of the image i.e at (Floor(COLS/2), Floor(ROWS/2)). The ranges of rho and theta are: 
 theta = [0, pi)
rho=[-DIAG/2, DIAG/2), where DIAG = cvRound{SquareRoot( (COLS*COLS) + (ROWS*ROWS))}

For ease of use, the input angles THETA, MINTHETA and MAXTHETA are taken in degrees, while the output theta is in radians. The angle resolution THETA is declared as an integer, but treated as a value in Q6.1 format (that is, THETA=3 signifies that the resolution used in the function is 1.5 degrees). When the output (rho, Ɵ theta) is used for drawing lines, you should be aware of the fact that origin is at the center of the image.

API Syntax

template<unsigned int RHO,unsigned int THETA,int MAXLINES,int DIAG,int MINTHETA,int MAXTHETA,int SRC_T, int ROWS, int COLS,int NPC>
       
void HoughLines(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,float outputrho[MAXLINES],float outputtheta[MAXLINES],short threshold,short linesmax)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 279. HoughLines Function Parameter Descriptions
Parameter Description
RHO Distance resolution of the accumulator in pixels.
THETA Angle resolution of the accumulator in degrees and Q6.1 format.
MAXLINES Maximum number of lines to be detected
MINTHETA Minimum angle in degrees to check lines.
MAXTHETA Maximum angle in degrees to check lines
DIAG Diagonal of the image. It should be cvRound(sqrt(rows*rows + cols*cols)/RHO).
SRC_T Input Pixel Type. Only 8-bit, unsigned, 1-channel is supported (XF_8UC1).
ROWS Maximum height of input image
COLS Maximum width of input image
NPC Number of Pixels to be processed per cycle; Only single pixel supported XF_NPPC1.
_src_mat Input image should be 8-bit, single-channel binary image.
outputrho Output array of rho values. rho is the distance from the coordinate origin (center of the image).
outputtheta Output array of theta values. Theta is the line rotation angle in radians.
threshold Accumulator threshold parameter. Only those lines are returned that get enough votes (>threshold).
linesmax Maximum number of lines.

Resource Utilization

The table below shows the resource utilization of the kernel for different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 to process a grayscale HD (1080x1920) image for 512 lines.

Table 280. Houghlines Function Resource Utilization Summary
Name Resource Utilization
THETA=1, RHO=1
BRAM_18K 542
DSP48E 10
FF 60648
LUT 56131

Performance Estimate

The following table shows the performance of kernel for different configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 to process a grayscale HD (1080x1920) image for 512 lines.

Table 281. Houghlines Function Performance Estimate Summary
Operating Mode Operating Frequency (MHz) Latency Estimate
Max (ms)
THETA=1, RHO=1 300 12.5

Pyramid Up

The pyrUp function is an image up-sampling algorithm. It first inserts zero rows and zero columns after every input row and column making up to the size of the output image. The output image size is always . The zero padded image is then smoothened using Gaussian image filter. Gaussian filter for the pyramid-up function uses a fixed filter kernel as given below:

However, to make up for the pixel intensity that is reduced due to zero padding, each output pixel is multiplied by 4.

API Syntax

template<int TYPE, int ROWS, int COLS, int NPC> 
void pyrUp (xf::Mat<TYPE, ROWS, COLS, NPC> & _src, xf::Mat<TYPE, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 282. pyrUp Function Parameter Descriptions
Parameter Description
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum Height or number of output rows to build the hardware for this kernel
COLS Maximum Width or number of output columns to build the hardware for this kernel
NPC Number of pixels to process per cycle. Currently, the kernel supports only 1 pixel per cycle processing (XF_NPPC1).
_src Input image stream
_dst Output image stream

Resource Utilization

The following table summarizes the resource utilization of pyrUp for 1 pixel per cycle implementation, for a maximum input image size of 1920x1080 pixels. The results are after synthesis in Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz.

Table 283. pyrUp Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 Pixel 300 1124 1199 0 10

The following table summarizes the resource utilization of pyrUp for 1 pixel per cycle implementation, for a maximum input image size of 4K with BGR. The results are after synthesis in Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz.

Table 284. pyrUp Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 Pixel 300 2074 2176 0 59

Performance Estimate

The following table summarizes performance estimates of pyrUp function on Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 285. pyrUp Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Input Image Size Latency Estimate
Max (ms)
1 pixel 300 1920x1080 27.82

Pyramid Down

The pyrDown function is an image down-sampling algorithm which smoothens the image before down-scaling it. The image is smoothened using a Gaussian filter with the following kernel:

Down-scaling is performed by dropping pixels in the even rows and the even columns. The resulting image size is .

API Syntax

template<int TYPE, int ROWS, int COLS, int NPC,bool USE_URAM=false> 
void pyrDown (xf::Mat<TYPE, ROWS, COLS, NPC> & _src, xf::Mat<TYPE, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 286. pyrDown Function Parameter Descriptions
Parameter Description
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum Height or number of input rows to build the hardware for this kernel
COLS Maximum Width or number of input columns to build the hardware for this kernel
NPC Number of pixels to process per cycle. Currently, the kernel supports only 1 pixel per cycle processing (XF_NPPC1).
USE_URAM Enable to map storage structures to UltraRAM
_src Input image stream
_dst Output image stream

Resource Utilization

The following table summarizes the resource utilization of pyrDown for 1 pixel per cycle implementation, for a maximum input image size of 1920x1080 pixels. The results are after synthesis in Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz.

Table 287. pyrDown Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 Pixel 300 1171 1238 1 5

The following table summarizes the resource utilization of pyrDown for 1 pixel per cycle implementation, for a maximum input image size of 4Kwith BGR image. The results are after synthesis in Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz.

Table 288. pyrDown Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 Pixel 300 2158 1983 2 30

The following table summarizes the resource utilization of pyrDown for 1 pixel per cycle implementation, for a maximum input image size of 3840x2160 pixels. The results are after synthesis in SDx 2019.1 for the Xilinx xczu7eg-ffvb1156-1 FPGA at 300 MHz with UltraRAM enabled.

Table 289. pyrDown Function Resource Utilization Summary with UltraRAM Enabled
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs URAM
1 Pixel 300 1171 1243 0 0 1

Performance Estimate

The following table summarizes performance estimates of pyrDown function in Vivado HLS 2019.1 for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 290. pyrDown Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Input Image Size Latency Estimate
Max (ms)
1 pixel 300 1920x1080 6.99

InitUndistortRectifyMapInverse

The InitUndistortRectifyMapInverse function generates mapx and mapy, based on a set of camera parameters, where mapx and mapy are inputs for the xf::remap function. That is, for each pixel in the location (u, v) in the destination (corrected and rectified) image, the function computes the corresponding coordinates in the source image (the original image from camera). The InitUndistortRectifyMapInverse module is optimized for hardware, so the inverse of rotation matrix is computed outside the synthesizable logic. Note that the inputs are fixed point, so the floating point camera parameters must be type casted to Q12.20 format.

API Syntax

template< int CM_SIZE, int DC_SIZE, int MAP_T, int ROWS, int COLS, int NPC >
void InitUndistortRectifyMapInverse ( ap_fixed<32,12> *cameraMatrix, ap_fixed<32,12> *distCoeffs, ap_fixed<32,12> *ir, xf::Mat<MAP_T, ROWS, COLS, NPC> &_mapx_mat, xf::Mat<MAP_T, ROWS, COLS, NPC> &_mapy_mat, int _cm_size, int _dc_size)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 291. InitUndistortRectifyMapInverse Function Parameter Descriptions
Parameter Description
CM_SIZE It must be set at the compile time, 9 for 3x3 matrix
DC_SIZE It must be set at the compile time, must be 4,5 or 8
MAP_T It is the type of output maps, and must be XF_32FC1
ROWS Maximum image height, necessary to generate the output maps
COLS Maximum image width, necessary to generate the output maps
NPC Number of pixels per cycle. This function supports only one pixel per cycle, so set to XF_NPPC1
cameraMatrix The input matrix representing the camera in the old coordinate system
distCoeffs The input distortion coefficients (k1,k2,p1,p2[,k3[,k4,k5,k6]])
ir The input transformation matrix is equal to Invert(newCameraMatrix*R), where newCameraMatrix represents the camera in the new coordinate system and R is the rotation matrix.. This processing will be done outside the synthesizable block
_mapx_mat Output mat objects containing the mapx
_mapy_mat Output mat objects containing the mapy
_cm_size 9 for 3x3 matrix
_dc_size 4, 5 or 8. If this is 0, then it means there is no distortion

InRange

The InRange function checks if pixels in the image src lie between the given boundaries. dst(x,y) is set to 255, if src(x,y) is within the specified thresholds and otherwise 0.

Dst(I)= lowerb ≤ src(I) ≤ upperb

Where (x,y) is the spatial coordinate of the pixel.

API Syntax

template<int SRC_T, int ROWS, int COLS,int NPC=1>
void inRange(xf::Mat<SRC_T, ROWS, COLS, NPC> & src,unsigned char lower_thresh,unsigned char upper_thresh,xf::Mat<SRC_T, ROWS, COLS, NPC> & dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 292. InRange Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src Input image
dst Output image
lower_thresh Lower threshold value
upper_thresh Upper threshold value

Resource Utilization

The following table summarizes the resource utilization of the InRange function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA

Table 293. InRange Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 86 154
LUT 60 148
CLB 15 37

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 294. InRange Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Integral Image

The integral function computes an integral image of the input. Each output pixel is the sum of all pixels above and to the left of itself.

API Syntax

template<int SRC_TYPE,int DST_TYPE, int ROWS, int COLS, int NPC=1>
void integral(xf::Mat<SRC_TYPE, ROWS, COLS, NPC> & _src_mat, xf::Mat<DST_TYPE, ROWS, COLS, NPC> & _dst_mat)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 295. integral Function Parameter Descriptions
Parameter Description
SRC_TYPE Input pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1)
DST_TYPE Output pixel type. Only 32-bit,unsigned,1 channel is supported(XF_32UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image
NPC Number of pixels to be processed per cycle; this function supports only XF_NPPC1 or 1 pixel per cycle operations.
_src_mat Input image
_dst_mat Output image

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 296. integral Function Resource Utilization Summary
Name Resource Utilization
1 pixel
300 MHz
BRAM_18K 4
DSP48E 0
FF 613
LUT 378
CLB 102

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 297. integral Function Performance Estimate Summary
Operating Mode Latency Estimate

Operating Frequency

(MHz)

 Latency(in ms)
1pixel 300 7.2

Dense Pyramidal LK Optical Flow

Optical flow is the pattern of apparent motion of image objects between two consecutive frames, caused by the movement of object or camera. It is a 2D vector field, where each vector is a displacement vector showing the movement of points from first frame to second.

Optical Flow works on the following assumptions:

  • Pixel intensities of an object do not have too many variations in consecutive frames
  • Neighboring pixels have similar motion
Consider a pixel I(x, y, t) in first frame. (Note that a new dimension, time, is added here. When working with images only, there is no need of time). The pixel moves by distance (dx, dy) in the next frame taken after time dt. Thus, since those pixels are the same and the intensity does not change, the following is true:

Taking the Taylor series approximation on the right-hand side, removing common terms, and dividing by dt gives the following equation:

Where , , and .

The above equation is called the Optical Flow equation, where, fx and fy are the image gradientsand ft is the gradient along time. However, (u, v) is unknown. It is not possible to solve this equation with two unknown variables. Thus, several methods are provided to solve this problem. One method is Lucas-Kanade. Previously it was assumed that all neighboring pixels have similar motion. The Lucas-Kanade method takes a patch around the point, whose size can be defined through the ‘WINDOW_SIZE’ template parameter. Thus, all the points in that patch have the same motion. It is possible to find (fx, fy, ft ) for these points. Thus, the problem now becomes solving ‘WINDOW_SIZE * WINDOW_SIZE’ equations with two unknown variables,which is over-determined. A better solution is obtained with the “least square fit” method. Below is the final solution, which is a problem with two equations and two unknowns:

This solution fails when a large motion is involved and so pyramids are used. Going up in the pyramid, small motions are removed and large motions become small motions and so by applying Lucas-Kanade, the optical flow along with the scale is obtained.

API Syntax

template< int NUM_PYR_LEVELS, int NUM_LINES, int WINSIZE, int FLOW_WIDTH, int FLOW_INT, int TYPE, int ROWS, int COLS, int NPC,bool USE_URAM=false>
void densePyrOpticalFlow(
xf::Mat<TYPE,ROWS,COLS,NPC> & _current_img,
xf::Mat<TYPE,ROWS,COLS,NPC> & _next_image,
xf::Mat<XF_32UC1,ROWS,COLS,NPC> & _streamFlowin,
xf::Mat<XF_32UC1,ROWS,COLS,NPC> & _streamFlowout,
const int level, const unsigned char scale_up_flag, float scale_in, ap_uint<1> init_flag)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 298. densePyrOpticalFlow Function Parameter Descriptions
Parameter Description
NUM_PYR_LEVELS Number of Image Pyramid levels used for the optical flow computation
NUM_LINES Number of lines to buffer for the remap algorithm – used to find the temporal gradient
WINSIZE Window Size over which Optical Flow is computed
FLOW_WIDTH, FLOW_INT

Data width and number of integer bits to define the signed flow vector data type. Integer bit includes the signed bit.

The default type is 16-bit signed word with 10 integer bits and 6 decimal bits.
TYPE Pixel type of the input image. XF_8UC1 is only the supported value.
ROWS Maximum height or number of rows to build the hardware for this kernel
COLS Maximum width or number of columns to build the hardware for this kernel
NPC Number of pixels the hardware kernel must process per clock cycle. Only XF_NPPC1, 1 pixel per cycle, is supported.
USE_URAM Enable to map some storage structures to UltraRAM
_curr_img First input image stream
_next_img Second input image to which the optical flow is computed with respect to the first image
_streamFlowin 32-bit Packed U and V flow vectors input for optical flow. The bits from 31-16 represent the flow vector U while the bits from 15-0 represent the flow vector V.
_streamFlowout 32-bit Packed U and V flow vectors output after optical flow computation. The bits from 31-16 represent the flow vector U while the bits from 15-0 represent the flow vector V.
level Image pyramid level at which the algorithm is currently computing the optical flow.
scale_up_flag Flag to enable the scaling-up of the flow vectors. This flag is set at the host when switching from one image pyramid level to the other.
scale_in Floating point scale up factor for the scaling-up the flow vectors.

The value is (previous_rows-1)/(current_rows-1). This is not 1 when switching from one image pyramid level to the other.
init_flag Flag to initialize flow vectors to 0 in the first iteration of the highest pyramid level. This flag must be set in the first iteration of the highest pyramid level (smallest image in the pyramid). The flag must be unset for all the other iterations.

Resource Utilization

The following table summarizes the resource utilization of densePyrOpticalFlow for 1 pixel per cycle implementation, with the optical flow computed for a window size of 11 over an image size of 1920x1080 pixels. The results are after implementation in Vivado HLS 2019.1 for the Xilinx xczu9eg-ffvb1156-2L-e FPGA at 300 MHz.

Table 299. densePyrOpticalFlow Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 Pixel 300 32231 16596 52 215

Resource Utilization with UltraRAM Enable

The following table summarizes the resource utilization of densePyrOpticalFlow for 1 pixel per cycle implementation, with the optical flow computed for a window size of 11 over an image size of 3840X2160 pixels. The results are after implementation in SDx 2019.1 for the Xilinx xczu7ev-ffvc1156-2 FPGA at 300 MHz with UltraRAM enabled.

Table 300. densePyrOpticalFlow Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs URAM
1 Pixel 300 31164 42320 81 34 23

Performance Estimate

The following table summarizes performance figures on hardware for the densePyrOpticalFlow function for 5 iterations over 5 pyramid levels scaled down by a factor of two at each level. This has been tested on the zcu102 evaluation board.

Table 301. densePyrOpticalFlow Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Image Size Latency Estimate
Max (ms)
1 pixel 300 1920x1080 49.7
1 pixel 300 1280x720 22.9
1 pixel 300 1226x370 12.02

Dense Non-Pyramidal LK Optical Flow

Optical flow is the pattern of apparent motion of image objects between two consecutive frames, caused by the movement of object or camera. It is a 2D vector field, where each vector is a displacement vector showing the movement of points from first frame to second.

Optical Flow works on the following assumptions:

  • Pixel intensities of an object do not have too many variations in consecutive frames
  • Neighboring pixels have similar motion
Consider a pixel I(x, y, t) in first frame. (Note that a new dimension, time, is added here. When working with images only, there is no need of time). The pixel moves by distance (dx, dy) in the next frame taken after time dt. Thus, since those pixels are the same and the intensity does not change, the following is true:

Taking the Taylor series approximation on the right-hand side, removing common terms, and dividing by dt gives the following equation:

Where , , and .

The above equation is called the Optical Flow equation, where, fx and fy are the image gradientsand ft is the gradient along time. However, (u, v) is unknown. It is not possible to solve this equation with two unknown variables. Thus, several methods are provided to solve this problem. One method is Lucas-Kanade. Previously it was assumed that all neighboring pixels have similar motion. The Lucas-Kanade method takes a patch around the point, whose size can be defined through the ‘WINDOW_SIZE’ template parameter. Thus, all the points in that patch have the same motion. It is possible to find (fx, fy, ft ) for these points. Thus, the problem now becomes solving ‘WINDOW_SIZE * WINDOW_SIZE’ equations with two unknown variables,which is over-determined. A better solution is obtained with the “least square fit” method. Below is the final solution, which is a problem with two equations and two unknowns:

API Syntax

template<int TYPE, int ROWS, int COLS, int NPC, int WINDOW_SIZE,bool USE_URAM=false>
void DenseNonPyrLKOpticalFlow (xf::Mat<TYPE, ROWS, COLS, NPC> & frame0, xf::Mat<TYPE, ROWS, COLS, NPC> & frame1, xf::Mat<XF_32FC1, ROWS, COLS, NPC> & flowx, xf::Mat<XF_32FC1, ROWS, COLS, NPC> & flowy)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 302. DenseNonPyrLKOpticalFlow Function Parameter Descriptions
Parameter Description
Type pixel type. The current supported pixel value is XF_8UC1, unsigned 8 bit.
ROWS Maximum number of rows of the input image that the hardware kernel must be built for.
COLS Maximum number of columns of the input image that the hardware kernel must be built for.
NPC Number of pixels to process per cycle. Supported values are XF_NPPC1 (=1) and XF_NPPC2(=2).
WINDOW_SIZE Window size over which optical flow will be computed. This can be any odd positive integer.
USE_URAM Enable to map storage structures to UltraRAM.
frame0 First input images.
frame1 Second input image. Optical flow is computed between frame0 and frame1.
flowx Horizontal component of the flow vectors. The format of the flow vectors is XF_32FC1 or single precision.
flowy Vertical component of the flow vectors. The format of the flow vectors is XF_32FC1 or single precision.

Resource Utilization

The following table summarizes the resource utilization of DenseNonPyrLKOpticalFlow for a 4K image, as generated in the Vivado HLS 2019.1 version tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA at 300 MHz.

Table 303. DenseNonPyrLKOpticalFlow Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUTs
1 pixel 300 178 42 11984 7730
2 pixel 300 258 82 22747 15126

The following table summarizes the resource utilization of DenseNonPyrLKOpticalFlow for a 4K image, as generated in the SDx version tool for the Xilinx Xczu7eg-ffvb1156-1 FPGA at 300 MHz with UltraRAM enabled.

Table 304. DenseNonPyrLKOpticalFlow Function Resource Utilization Summary with UltraRAM Eanble
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K URAM DSP_48Es FF LUTs
1 pixel 300 0 12 42 11803 7469
2 pixel 300 0 23 80 22124 13800

Performance Estimate

The following table summarizes performance estimates of the DenseNonPyrLKOpticalFlow function for a 4K image, generated using Vivado HLS 2019.1 version tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 305. DenseNonPyrLKOpticalFlow Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Latency Estimate
Max (ms)
1 pixel 300 28.01
2 pixel 300 14.01

Kalman Filter

The classic Kalman Filter is proposed for linear system. The state-space description of a linear system assumed to be:

where xk is the state vector at kth time instant, constant (known) Ak is an nxn state transition matrix, constant (known) Bk is an nxm control input matrix, constant (known) Γk is an nxp system noise input matrix, constant (known) Hk is a qxn measurement matrix, constant (known) with 1≤ m, p, q ≤ n, {uk} a (known) sequence of m vectors (called a deterministic input sequence), and and are respectively, (unknown) system and observation noise sequences, with known statistical information such as mean, variance, and covariance.

The Kalman filter assumes the following:
  1. and are assumed to be sequences of zero-mean Gaussian (or normal) white noise. That is, and , where δkl is a Kronecker Delta function, and Qk and Rk are positive definite matrices, E(u) is an expectation of random variable u.
  3. The initial state x0 is also assumed to be independent of and , that is .

The representation

The Kalman filter algorithm can be summarized as shown in the below equations: means the estimate of x at time instant k using all the data measured till the time instant j.

Initialization
Time Update / Predict
Measurement Update/Correction

Where P is an estimate error covariance nxn matrix, Gk is Kalman gain nxq matrix, and k=1, 2,..

Computation Strategy

The numerical accuracy of the Kalman filter covariance measurement update is a concern for implementation, since it differentiates two positive definite arrays. This is a potential problem if finite precision is used for computation. This design uses UDU factorization of P to address the numerical accuracy/stability problems.

During the initialization (before the first iteration), the user has to supply error covariance matrix P’s U0_mat and D0_mat matrices and system noise co-variance matrix Q’s Uq_mat and Dq_mat matrices. These U and D matrices can be obtained using Backward Cholesky decomposition.

Below, we illustrate the Backward Cholesky decomposition of P into a unit upper triangular matrix U and diagonal matrix D such that P=UDUT.

For the n th column of U and D:



For remaining columns, that is j=n-1, n-2, ….1,:





Example for Kalman Filter

//Control Flag
	INIT_EN 	 = 1; TIMEUPDATE_EN = 2; MEASUPDATE_EN = 4;
	XOUT_EN_TU 	= 8; UDOUT_EN_TU	= 16; XOUT_EN_MU 	= 32;
	UDOUT_EN_MU	= 64; EKF_MEM_OPT	= 128;
	//Load A_mat,B_mat,Uq_mat,Dq_mat,H_mat,X0_mat,U0_mat,D0_mat,R_mat
	//Initialization
KalmanFilter(A_mat, B_mat, Uq_mat, Dq_mat,  H_mat, X0_mat, U0_mat, D0_mat, R_mat, u_mat, y_mat, Xout_mat, Uout_mat, Dout_mat, INIT_EN);

for(int iteration=0; iteration< count; iteration++)
{
	//Load u_mat (control input)
	for(int index=0; index <C_CTRL; index ++)
		u_mat.write_float(index, control_input[index]);

//Time Update
KalmanFilter(A_mat, B_mat, Uq_mat, Dq_mat,  H_mat, X0_mat, U0_mat, D0_mat, R_mat, u_mat, y_mat, Xout_mat, Uout_mat, Dout_mat, TIMEUPDATE_EN + XOUT_EN_TU + UDOUT_EN_TU);

//Load y_mat (measurement vector)
	for(int index =0; index <M_MEAS; index ++)
		y_mat.write_float(index, control_input[index]);

//Measurement Update
KalmanFilter(A_mat, B_mat, Uq_mat, Dq_mat,  H_mat, X0_mat, U0_mat, D0_mat, R_mat, u_mat, y_mat, Xout_mat, Uout_mat, Dout_mat, MEASUPDATE_EN + XOUT_EN_MU + UDOUT_EN_MU);
}

API Syntax

template<int N_STATE, int M_MEAS, int C_CTRL, Int  MTU, int MMU, bool USE_URAM=0, bool EKF_EN=0, int TYPE, int NPC >
void KalmanFilter (	xf::Mat<TYPE, N_STATE, N_STATE, NPC> 	&A_mat, 
#if KF_C!=0
xf::Mat<TYPE, N_STATE, C_CTRL, NPC> 	&B_mat, 
#endif
xf::Mat<TYPE, N_STATE, N_STATE, NPC> 	&Uq_mat, 
xf::Mat<TYPE, N_STATE, 1, NPC> 		&Dq_mat,  
xf::Mat<TYPE, M_MEAS, N_STATE, NPC> 	&H_mat,
xf::Mat<TYPE, N_STATE, 1, NPC> 		&X0_mat, 
xf::Mat<TYPE, N_STATE, N_STATE, NPC> 	&U0_mat, 
xf::Mat<TYPE, N_STATE, 1, NPC> 		&D0_mat, 
xf::Mat<TYPE, M_MEAS, 1, NPC> 		&R_mat, 
#if KF_C!=0
xf::Mat<TYPE, C_CTRL, 1, NPC> 		&u_mat, 
#endif
xf::Mat<TYPE, M_MEAS, 1, NPC> 		&y_mat, 
xf::Mat<TYPE, N_STATE, 1, NPC> 		&Xout_mat, 
xf::Mat<TYPE, N_STATE, N_STATE, NPC> 	&Uout_mat, 
xf::Mat<TYPE, N_STATE, 1, NPC> 		&Dout_mat, 
unsigned char flag)

Parameter Descriptions

Table 306. Kalman Filter Function Parameter Descriptions
Parameter Used (✓) or Unused (X) Description
Initialization Time Update Measurement Update
N_STATE ✓ ✓ ✓ Number of state variable; possible options are 1 to 128
M_MEAS ✓ ✓ ✓ Number of measurement variable; possible options are 1 to 128; M_MEAS must be less than or equal to N_STATE. In case of Extended Kalman Filter(EKF), M_MEAS should be 1.
C_CTRL ✓ ✓ ✓ Number of control variable; possible options are 0 to 128; C_CTRL must be less than or equal to N_STATE. In case of EKF, C_CTRL should be 1.
MTU ✓ ✓ ✓ Number of multipliers used in time update; possible options are 1 to 128; MTU must be less than or equal to N_STATE
MMU ✓ ✓ ✓ Number of multipliers used in Measurement update; possible options are 1 to 128; MMU must be less than or equal to N_STATE
USE_URAM ✓ ✓ ✓ URAM enable; possible options are 0 and 1
EKF_EN ✓ ✓ ✓ Extended Kalman Filter Enable; possible options are 0 and 1
TYPE ✓ ✓ ✓ Type of input pixel. Currently, only XF_32FC1 is supported.
NPC ✓ ✓ ✓ Number of pixels to be processed per cycle; possible option is XF_NPPC1 (NOT relevant for this function)
A_mat ✓ X X Transition matrix A. In case of EKF, Jacobian Matrix F is mapped to A_mat.
B_mat ✓ X X Control matrix B. In case of KF, B_mat argument is not required when C_CTRL=0. And in case of EKF, Dummy matrix with size (N_STATE x 1) is mapped to B_mat.
Uq_mat ✓ X X U matrix for Process noise covariance matrix Q
Dq_mat ✓ X X D matrix for Process noise covariance matrix Q(only diagonal elements)
H_mat ✓ X X Measurement Matrix H. In case of EKF, Jacobian Matrix H is mapped to H_mat.
X0_mat ✓ X X Initial state matrix. . In case of EKF, state transition function f is mapped to X0_mat.
U0_mat ✓ X X U matrix for initial error estimate covariance matrix P
D0_mat ✓ X X D matrix for initial error estimate covariance matrix P(only diagonal elements)
R_mat ✓ X X Measurement noise covariance matrix R(only diagonal elements). In case of EKF, input only one value of R since M_MEAS=1.
u_mat X ✓ X Control input vector. In case of KF, u_mat argument is not required when C_CTRL=0. And in case of EKF, observation function h is mapped to u_mat.
y_mat X X ✓ Measurement vector. In case of EKF, input only one measurement since M_MEAS=1.
Xout_mat X ✓ ✓ Output state matrix
Uout_mat X ✓ ✓ U matrix for output error estimate covariance matrix P
Dout_mat X ✓ ✓ D matrix for output error estimate covariance matrix P(only diagonal elements)
flag ✓ ✓ ✓ Control flag register
All U, D counterparts of all initialized matrices (Q and P) are obtained using U-D factorization
Table 307. Control Flag Registers
Flag bit Description
0 Initialization enable
1 Time update enable
2 Measurement update enable
3 Xout enable for time update
4 Uout/Dout enable for time update
5 Xout enables for measurement update
6 Uout/Dout enable for measurement update
7 Read optimization (Uq_mat, Dq_mat, U0_mat, D0_mat and R_mat) for Extended Kalman Filter

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using SDx 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1 FPGA.

Table 308. Kalman Filter Function Resource Utilization Summary
Name Resource Utilization
N_STATE=128; C_CTRL=128; M_MEAS=128; MTU=24; MMU=24 N_STATE=64; C_CTRL=64; M_MEAS=12;MTU=16;MMU=16 N_STATE=5; C_CTRL=1; M_MEAS=3;MTU=2;MMU=2
300 MHz 300 MHz 300 MHz
BRAM_18K 387 142 24
DSP48E 896 548 87
FF 208084 128262 34887
LUT 113556 70942 18141
The following table shows the resource utilization of the kernel for a configuration with USE_URAM enable, generated using SDx 2019.1 for the Xilinx xczu7ev-ffvc1156-2-e FPGA.
Table 309. Resource Utilization with UltraRAM Enabled
Resource Resource Utilization (N_STATE=64; C_CTRL=64; M_MEAS=12; MTU=4; MMU=4) (300 MHz) (ms)
BRAM_18K 30
DSP48E 284
FF 99210
LUT 53939
URAM 11

Performance Estimate

The following table shows the performance of kernel for different configurations, as generated using SDx 2019.1 tool for the Xilinx® Xczu9eg-ffvb1156-1, for one iteration. Latency estimate is calculated by taking average latency of 100 iteration.

Table 310. Kalman Filter Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
N_STATE=128; C_CTRL=128; M_MEAS=128; MTU=24; MMU=24 300 0.7
N_STATE=64; C_CTRL=64; M_MEAS=12; MTU=16; MMU=16 300 0.12
N_STATE=5; C_CTRL=1; M_MEAS=3; MTU=2; MMU=2 300 0.04

The following table shows the performance of kernel for a configuration with UltraRAM enable, as generated using SDx 2019.1 tool for the Xilinx xczu7ev-ffvc1156-2-e, for one iteration. Latency estimate is calculated by taking average latency of 100 iteration.

Table 311. Performance Estimate with UltraRAM
Operating Mode Operating Frequency (MHz) Latency (ms)
N_STATE=64; C_CTRL=64; M_MEAS=12;MTU=4;MMU=4 300 0.25

Extended Kalman Filter

The Kalman filter estimates the state vector in a linear model. If the model is nonlinear, then a linearization procedure is performed to obtain the filtering equations. The Kalman filter so obtained will be called the Extended Kalman filter. A state-space description of non-linear system can have a non-linear model of the form:





Where fk and hk are valued functions with ranges in Rn and Rq, respectively. 1≤q≤n, and Tk a matrix-valued function with range in RnxRq such that for each k the first order partial derivatives of fk (xk) and hk (xk)with respect to all the components of xk are continuous. We consider zero-mean Gaussian white noise sequences and with ranges in Rp and Rq respectively, 1≤p, q≤n.

The real-time linearization process is carried out as shown in the following equations. In the lines of the linear model, the initial estimate and predicted position are chosen to be:

Then, , consecutively, for k=1,2,…, use the predicted positions.

Note:
  1. , where , k is a time index and superscript is row index and
  2. is a space of column vectors
The equation for time update computations is as follows:

The equation for measurement update computations is as follows:





Example for Example Kalman Filter
//Load F/B_mat/Uq_mat/Dq_mat/X0_mat/U0_mat/D0_mat
	
for(int iteration=0; iteration< count; iteration++)
{
	if(iteration ==0)
		model_fx(X0_mat, fx);// update fx using X0_mat
	else
model_fx(Xout_mat, fx); // update fx using Xout_mat

		unsigned char initFlag;
		if(iteration ==0)
			initFlag = INIT_EN;
		else
			initFlag = EKF_MEM_OPT+INIT_EN;

		//Initialization
KalmanFilter (F, B_mat, Uq_mat, Dq_mat, H, fx, U0_mat, D0_mat, R_mat, hx, y_mat, Xout_mat, Uout_mat, Dout_mat, initFlag);

		//Time Update
KalmanFilter (F, B_mat, Uq_mat, Dq_mat, H, fx, U0_mat, D0_mat, R_mat, hx, y_mat, Xout_mat, Uout_mat, Dout_mat, TIMEUPDATE_EN + XOUT_EN_TU + UDOUT_EN_TU);
		for(int index=0; index< M_MEAS; index++)
		{
if(iteration ==0)
// update hx/H using X0_mat for one measurement at a time
			model_hxH(X0_mat, hx, H, index);
		else
		//update hx/H using Xout_mat for one measurement at a time
model_hxH(Xout_mat, hx, H, index); 
			
//Load R_mat
			R_mat.write_float(0,R_matrix[index][index]);

			//Load y_mat
			Y_mat.write_float(0,measurement_vector[index]);

//Measurement Update
KalmanFilter (F, B_mat, Uq_mat, Dq_mat, H, fx, U0_mat, D0_mat, R_mat, hx, y_mat, Xout_mat, Uout_mat, Dout_mat, MEASUPDATE_EN + XOUT_EN_MU + UDOUT_EN_MU);
		}
}

Mean and Standard Deviation

The meanStdDev function computes the mean and standard deviation of input image. The output Mean value is in fixed point Q8.8 format, and the Standard Deviation value is in Q8.8 format. Mean and standard deviation are calculated as follows:





API Syntax

template<int SRC_T,int ROWS, int COLS,int NPC=1>
void meanStdDev(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,unsigned short* _mean,unsigned short* _stddev)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 312. meanStdDev Function Parameter Descriptions
Parameter Description
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed. Must be a multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image
_mean 16-bit data pointer through which the computed mean of the image is returned.
_stddev 16-bit data pointer through which the computed standard deviation of the image is returned.

Resource Utilization

The following table summarizes the resource utilization of the meanStdDev function, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 313. meanStdDev Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 6 896 461 121
8 pixel 150 0 13 1180 985 208

The following table summarizes the resource utilization of the meanStdDev function, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3Channel image.

Table 314. meanStdDev Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 7 5075 3324 725

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 315. meanStdDev Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency
1 pixel operation (300 MHz) 6.9 ms
8 pixel operation (150 MHz) 1.69 ms

Max

The Max function calculates the per-element maximum of two corresponding images src1, src2 and stores the result in dst.

dst(x,y)=max( src1(x,y) ,src2(x,y) )

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void Max(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, xf::Mat<SRC_T, ROWS, COLS, NPC> & _src2, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 316. Max Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First input image
_src2 Second input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Max function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 317. Max Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 103 153
LUT 44 102
CLB 21 38

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 318. Max Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

MaxS

The MaxS function calculates the maximum elements between src and given scalar value scl and stores the result in dst.

dst(I)=maxS( src(I) ,scl )

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void MaxS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)], xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 319. MaxS Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First Input image
_scl Input scalar value, the size should be number of channels
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the MaxS function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 320. MaxS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 162 43
LUT 103 104
CLB 32 20

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 321. MaxS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Median Blur Filter

The function medianBlur performs a median filter operation on the input image. The median filter acts as a non-linear digital filter which improves noise reduction. A filter size of N would output the median value of the NxN neighborhood pixel values, for each pixel.

API Syntax

template<int FILTER_SIZE, int BORDER_TYPE, int TYPE, int ROWS, int COLS, int NPC> 
void medianBlur (xf::Mat<TYPE, ROWS, COLS, NPC> & _src, xf::Mat<TYPE, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 322. medianBlur Function Parameter Descriptions
Parameter Description
FILTER_SIZE Window size of the hardware filter for which the hardware kernel will be built. This can be any odd positive integer greater than 1.
BORDER_TYPE The way in which borders will be processed in the hardware kernel. Currently, only XF_BORDER_REPLICATE is supported.
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed. Must be a multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed in parallel. Options are XF_NPPC1 (for 1 pixel processing per clock), XF_NPPC8 (for 8 pixel processing per clock
_src Input image.
_dst Output image.

Resource Utilization

The following table summarizes the resource utilization of the medianBlur function for XF_NPPC1 and XF_NPPC8 configurations, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 323. medianBlur Function Resource Utilization Summary
Operating Mode FILTER_SIZE

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 pixel 3 300 1197 771 0 3
8 pixel 3 150 6559 1595 0 6
1 pixel 5 300 5860 1886 0 5

The following table summarizes the resource utilization of the medianBlur function for XF_NPPC1 with 3channel image as input, generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 324. medianBlur Function Resource Utilization Summary
Operating Mode FILTER_SIZE

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
1 pixel 3 300 2100 1971 0 9
1 pixel 5 300 13541 9720 0 15

Performance Estimate

The following table summarizes performance estimates of medianBlur function on Vivado HLS 2019.1 version tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 325. medianBlur Function Performance Estimate Summary
Operating Mode FILTER_SIZE

Operating Frequency

(MHz)

 Input Image Size Latency Estimate
Max (ms)
1 pixel 3 300 1920x1080 6.99
8 pixel 3 150 1920x1080 1.75
1 pixel 5 300 1920x1080 7.00

Min

The Min function calculates the per element minimum of two corresponding images src1, src2 and stores the result in dst.

dst(I)=min( src1(I) ,src2(I) )

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void Min(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, xf::Mat<SRC_T, ROWS, COLS, NPC> & _src2, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 326. Min Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle, possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First input image
_src2 Second input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Min function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 327. Min Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 103 153
LUT 44 102
CLB 23 34

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 328. Min Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

MinS

The MinS function calculates the minimum elements between src and given scalar value scl and stores the result in dst.

dst(x,y)=minS( src(x,y) ,scl )

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void MinS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)], xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 329. MinS Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First Input image
_scl Input scalar value, the size should be the number of channels.
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the MinS function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA

Table 330. MinS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 104 159
LUT 43 103
CLB 23 36

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 331. MinS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

MinMax Location

The minMaxLoc function finds the minimum and maximum values in an image and location of those values.





API Syntax

template<int SRC_T,int ROWS,int COLS,int NPC>
void minMaxLoc(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src,int32_t *max_value, int32_t *min_value,uint16_t *_minlocx, uint16_t *_minlocy, uint16_t *_maxlocx, uint16_t *_maxlocy )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 332. minMaxLoc Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel (XF_8UC1), 16-bit, unsigned, 1 channel (XF_16UC1), 16-bit, signed, 1 channel (XF_16SC1), 32-bit, signed, 1 channel (XF_32SC1) are supported.
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image
max_val Maximum value in the image, of type int.
min_val Minimum value in the image, of type int.
_minlocx x-coordinate location of the first minimum value.
_minlocy y-coordinate location of the first minimum value.
_maxlocx x-coordinate location of the first maximum value.
_maxlocy y-coordinate location of the first maximum value.

Resource Utilization

The following table summarizes the resource utilization of the minMaxLoc function, generated using Vivado HLS 2019.1 tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 333. minMaxLoc Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 3 451 398 86
8 pixel 150 0 3 1049 1025 220

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 334. minMaxLoc Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency
1 pixel operation (300 MHz) 6.9 ms
8 pixel operation (150 MHz) 1.69 ms

Mean Shift Tracking

Mean shift tracking is one of the basic object tracking algorithms. Mean-shift tracking tries to find the area of a video frame that is locally most similar to a previously initialized model. The object to be tracked is represented by a histogram. In object tracking algorithms target representation is mainly rectangular or elliptical region. It contains target model and target candidate. Color histogram is used to characterize the object. Target model is generally represented by its probability density function (pdf). Weighted RGB histogram is used to give more importance to object pixels.

Mean-shift algorithm is an iterative technique for locating the maxima of a density function. For object tracking, the density function used is the weight image formed using color histograms of the object to be tracked and the frame to be tested. By using the weighted histogram we are taking spatial position into consideration unlike the normal histogram calculation. This function will take input image pointer, top left and bottom right coordinates of the rectangular object, frame number and tracking status as inputs and returns the centroid using recursive mean shift approach.

API Syntax

template <int MAXOBJ, int MAXITERS, int OBJ_ROWS, int OBJ_COLS, int SRC_T, int ROWS, int COLS, int NPC> 
void MeanShift(xf::Mat<SRC_T, ROWS, COLS, NPC> &_in_mat, uint16_t* x1, uint16_t* y1, uint16_t* obj_height, uint16_t* obj_width, uint16_t* dx, uint16_t* dy, uint16_t* status, uint8_t frame_status, uint8_t no_objects, uint8_t no_iters );

Template Parameter Descriptions

The following table describes the template parameters.

Table 335. MeanShift Template Parameters
Parameter Description
MAXOBJ Maximum number of objects to be tracked
MAXITERS Maximum iterations for convergence
OBJ_ROWS Maximum Height of the object to be tracked
OBJ_COLS Maximum width of the object to be tracked
SRC_T Type of the input xf::Mat, must be XF_8UC4, 8-bit data with 4 channels
ROWS Maximum height of the image
COLS Maximum width of the image
NPC Number of pixels to be processed per cycle; this function supports only XF_NPPC1 or 1 pixel per cycle operations.

Function Parameter Description

The following table describes the function parameters.

Table 336. MeanShift Function Parameters
Parameter Description
_in_mat Input xF Mat
x1 Top Left corner x-coordinate of all the objects
y1 Top Left corner y-coordinate of all the objects
obj_height Height of all the objects
obj_width Width of all the objects
dx Centers x-coordinate of all the objects returned by the kernel function
dy Centers y-coordinate of all the objects returned by the kernel function
status Track the object only if the status of the object is true, that is if the object goes out of the frame, status is made zero
frame_status Set as zero for the first frame and one for other frames
no_objects Number of objects racked
no_iters Number of iterations for convergence

Resource Utilization and Performance Estimate

The following table summarizes the resource utilization of the MeanShift function for normal (1 pixel) configuration as generated in Vivado HLS 2019.1 release tool for the part xczu9eg-ffvb1156-i-es1 at 300 MHz to process a RGB image of resolution,1920x1080, and for 10 objects of size of 250x250 and 4 iterations.

Table 337. MeanShift Function Resource Utilization and Performance Estimate Summary
Configuration Max. Latency (ms) BRAMs DSPs FFs LUTs
1 pixel 19.28 76 14 13198 10064

Limitations

The maximum number of objects that can be tracked is 10.

Otsu Threshold

Otsu threshold is used to automatically perform clustering-based image thresholding or the reduction of a gray-level image to a binary image. The algorithm assumes that the image contains two classes of pixels following bi-modal histogram (foreground pixels and background pixels), it then calculates the optimum threshold separating the two classes.

Otsu method is used to find the threshold which can minimize the intra class variance which separates two classes defined by weighted sum of variances of two classes.



Where, w_1is the class probability computed from the histogram.



Otsu shows that minimizing the intra-class variance is the same as maximizing inter-class variance





Where, is the class mean.

API Syntax

template<int SRC_T, int ROWS, int COLS,int NPC=1> void OtsuThreshold(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat, uint8_t &_thresh)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 338. OtsuThreshold Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_thresh Output threshold value after the computation

Resource Utilization

The following table summarizes the resource utilization of the OtsuThreshold function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 339. OtsuThreshold Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 8 49 2239 3353 653
8 pixel 150 22 49 1106 3615 704

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 340. OtsuThreshold Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.92 ms
8 pixel operation (150 MHz) 1.76 ms

Paintmask

The Paintmask function replace the pixel intensity value with given color value when mask is not zero or the corresponding pixel from the input image.

API Syntax


template< int SRC_T,int MASK_T, int ROWS, int COLS,int NPC=1>
void paintmask(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat, xf::Mat<MASK_T, ROWS, COLS, NPC> & in_mask, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst_mat, unsigned char _color[XF_CHANNELS(SRC_T,NPC)])

Parameter Descriptions

The following table describes the template and the function parameters.

Table 341. Paintmask Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
MASK_T Mask value type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_in_mask Input mask image
_dst_mat Output image
_color Color value to be filled when mask is not zero

Resource Utilization

The following table summarizes the resource utilization of the Paintmask Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 342. Paintmask Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 95 163
LUT 57 121
CLB 14 33

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 343. Painmask Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Pixel-Wise Addition

The add function performs the pixel-wise addition between two input images and returns the output image.

Iout(x, y) = Iin1(x, y) + Iin2(x, y)

Where:

  • Iout(x, y) is the intensity of the output image at (x, y) position
  • Iin1(x, y) is the intensity of the first input image at (x, y) position
  • Iin2(x, y) is the intensity of the second input image at (x, y) position.

XF_CONVERT_POLICY_TRUNCATE: Results are the least significant bits of the output operand, as if stored in two’s complement binary format in the size of its bit-depth.

XF_CONVERT_POLICY_SATURATE: Results are saturated to the bit depth of the output operand.

API Syntax

template<int POLICY_TYPE, int SRC_T, int ROWS, int COLS, int NPC=1> 
void add (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1,  
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2,  
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 344. add Function Parameter Descriptions
Parameter Description
POLICY_TYPE Type of overflow handling. It can be either, XF_CONVERT_POLICY_SATURATE or XF_CONVERT_POLICY_TRUNCATE.
SRC_T pixel type. Options are XF_8UC1,XF_8UC3,XF_16SC3 and_16SC1..
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 345. add Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 55 11
8 pixel 150 0 0 65 138 24

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process 4K image with 3 channels.

Table 346. add Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 113 77 24

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 347. add Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150MHz) 1.7

Pixel-Wise Multiplication

The multiply function performs the pixel-wise multiplication between two input images and returns the output image.

Iout(x, y) = Iin1(x, y) * Iin2(x, y) * scale_val

Where:

  • Iout(x, y) is the intensity of the output image at (x, y) position
  • Iin1(x, y) is the intensity of the first input image at (x, y) position
  • Iin2(x, y) is the intensity of the second input image at (x, y) position
  • scale_val is the scale value.

XF_CONVERT_POLICY_TRUNCATE: Results are the least significant bits of the output operand, as if stored in two’s complement binary format in the size of its bit-depth.

XF_CONVERT_POLICY_SATURATE: Results are saturated to the bit depth of the output operand.

API Syntax

template<int POLICY_TYPE, int SRC_T,int ROWS, int COLS, int NPC=1> 
void multiply (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1,  
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2,  
xf::Mat<int SRC_T int ROWS, int COLS, int NPC> dst,
float scale)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 348. multiply Function Parameter Descriptions
Parameter Description
POLICY_TYPE Type of overflow handling. It can be either, XF_CONVERT_POLICY_SATURATE or XF_CONVERT_POLICY_TRUNCATE.
SRC_T pixel type. Options are XF_8UC1,XF_8UC3,XF_16SC1 and XF_16SC3.
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image
scale_val Weighing factor within the range of 0 and 1

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 349. multiply Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 2 124 59 18
8 pixel 150 0 16 285 108 43

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K image with 3 channels.

Table 350. multiply Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 9 312 211 62

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 351. multiply Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.6

Pixel-Wise Subtraction

The subtract function performs the pixel-wise subtraction between two input images and returns the output image.

Iout(x, y) = Iin1(x, y) - Iin2(x, y)

Where:

  • Iout(x, y) is the intensity of the output image at (x, y) position
  • Iin1(x, y) is the intensity of the first input image at (x, y) position
  • Iin2(x, y) is the intensity of the second input image at (x, y) position.

XF_CONVERT_POLICY_TRUNCATE: Results are the least significant bits of the output operand, as if stored in two’s complement binary format in the size of its bit-depth.

XF_CONVERT_POLICY_SATURATE: Results are saturated to the bit depth of the output operand.

API Syntax

template<int POLICY_TYPE int SRC_T, int ROWS, int COLS, int NPC=1> 
void subtract (
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src1,  
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> src2,  
xf::Mat<int SRC_T, int ROWS, int COLS, int NPC> dst )

Parameter Descriptions

The following table describes the template and the function parameters.

Table 352. subtract Function Parameter Descriptions
Parameter Description
POLICY_TYPE Type of overflow handling. It can be either, XF_CONVERT_POLICY_SATURATE or XF_CONVERT_POLICY_TRUNCATE.
SRC_T pixel type. Options are XF_8UC1,XF_8UC3,XF_16SC3 and_16SC1.
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be a multiple of 8, for 8-pixel operation)
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
src2 Input image
dst Output image

Resource Utilization

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 353. subtract Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 62 53 11
8 pixel 150 0 0 59 13 21

The following table summarizes the resource utilization in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K image with 3 channels.

Table 354. subtract Function Resource Utilization Summary
Operating Mode

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 0 0 110 64 28

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 355. subtract Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency (ms)
1 pixel operation (300 MHz) 6.9
8 pixel operation (150 MHz) 1.7

Reduce

The Reduce function reduces the matrix to a vector by treating rows/cols as set of 1-D vectors and performing specified operation on vectors until a single row/col is obtained.

Reduction operation could be one of the following:
  • REDUCE_SUM : The output is the sum of all of the matrix’s rows/columns.
  • REDUCE_AVG : The output is the mean vector of all of the matrix’s rows/columns.
  • REDUCE_MAX : The output is the maximum (column/row-wise) of all of the matrix’s rows/columns.
  • REDUCE_MIN : The output is the minimum (column/row-wise) of all of the matrix’s rows/columns.

API Syntax

template< int REDUCE_OP, int SRC_T , int DST_T,  int ROWS, int COLS, int ONE_D_HEIGHT, int ONE_D_WIDTH,int NPC=1> void reduce(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat, xf::Mat<DST_T, ONE_D_HEIGHT, ONE_D_WIDTH, 1> & _dst_mat, unsigned char dim)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 356. Reduce Function Parameter Descriptions
Parameter Description
REDUCE_OP The flag specifies the type of reduction operation to be applied.
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
DST_T Output pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
ONE_D_HEIGHT Height of output 1-D vector or reduced matrix
ONE_D_WIDTH Width of output 1-D vector or reduced matrix
NPC Number of pixels to be processed per cycle; possible option is XF_NPPC1 (1 pixel per cycle).
_src_mat Input image
_dst_mat 1-D vector
dim Dimension index along which the matrix is reduced. 0 means that the matrix is reduced to a single row. 1 means that the matrix is reduced to a single column.

Resource Utilization

The following table summarizes the resource utilization of the Reduce function Normal mode(1 pixel) as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 357. Reduce Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation
300 MHz
BRAM_18K 2
DSP48E 0
FF 288
LUT 172
CLB 54

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 358. Reduce Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9

Remap

The remap function takes pixels from one place in the image and relocates them to another position in another image. Two types of interpolation methods are used here for mapping the image from source to destination image.

API Syntax

template<int WIN_ROWS,int INTERPOLATION_TYPE, int SRC_T, int MAP_T, int DST_T, int ROWS, int COLS, int NPC = 1,bool USE_URAM=false>

void remap (xf::Mat<SRC_T, ROWS, COLS, NPC> &_src_mat,
		 xf::Mat<DST_T, ROWS, COLS, NPC> &_remapped_mat,
		 xf::Mat<MAP_T, ROWS, COLS, NPC> &_mapx_mat,
		 xf::Mat<MAP_T, ROWS, COLS, NPC> &_mapy_mat);

Parameter Descriptions

The following table describes the template parameters.

Table 359. remap template Parameter Descriptions
Parameter Description
WIN_ROWS Number of input image rows to be buffered inside. Must be set based on the map data. For instance, for left right flip, 2 rows are sufficient.
INTERPOLATION_TYPE Type of interpolation, either XF_INTERPOLATION_NN (nearest neighbor) or XF_INTERPOLATION_BILINEAR (linear interpolation)
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
MAP_T Map type. Single channel float type. XF_32FC1.
DST_T Output image type. Grayscale image of type 8-bits and single channel. XF_8UC1.
ROWS Height of input and output images
COLS Width of input and output images
NPC Number of pixels to be processed per cycle; this function supports only XF_NPPC1 or 1 pixel per cycle operations.
USE_URAM Enable to map some structures to UltraRAM instead of BRAM.

The following table describes the function parameters.

Table 360. remap Function Parameter Descriptions
PARAMETERS DESCRIPTION
_src_mat Input xF Mat
_remapped_mat Output xF Mat
_mapx_mat mapX Mat of float type
_mapy_mat mapY Mat of float type

Resource Utilization

The following table summarizes the resource utilization of remap, for HD (1080x1920) images generated in the Vivado HLS 2019.1 version tool for the Xilinx xczu9eg-ffvb1156-i-es1 FPGA at 300 MHz, with WIN_ROWS as 64 for the XF_INTERPOLATION_BILINEAR mode.

Table 361. remap Function Resource Utilization Summary
Name Resource Utilization
BRAM_18K 64
DSP48E 17
FF 1738
LUT 1593
CLB 360

The following table summarizes the resource utilization of remap, for 4K (3840x2160) images generated in the SDx 2019.1 version tool for the Xilinx xczu7ev-ffvc1156 FPGA at 300 MHz, with WIN_ROWS as 100 for the XF_INTERPOLATION_BILINEAR mode using UltraRAM .

Table 362. remap Function Resource Utilization Summary with UltraRAM Enabled
Name Resource Utilization
BRAM_18K 3
DSP48E 10
URAM 24
FF 3196
LUT 3705

Performance Estimate

The following table summarizes the performance of remap(), for HD (1080x1920) images generated in the Vivado HLS 2019.1 version tool for the Xilinx xczu9eg-ffvb1156-i-es1 FPGA at 300 MHz, with WIN_ROWS as 64 for XF_INTERPOLATION_BILINEAR mode.

Table 363. remap Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

Latency Estimate

Max latency (ms)
1 pixel mode 300 7.2

Resolution Conversion (Resize)

Resolution Conversion is the method used to resize the source image to the size of the destination image. Different types of interpolation techniques can be used in resize function, namely: Nearest-neighbor, Bilinear, and Area interpolation. The type of interpolation can be passed as a template parameter to the API. The following enumeration types can be used to specify the interpolation type:

  • XF_INTERPOLATION_NN - For Nearest-neighbor interpolation
  • XF_INTERPOLATION_BILINEAR - For Bilinear interpolation
  • XF_INTERPOLATION_AREA - For Area interpolation
Note: Scaling factors greater than or equal to 0.25 are supported in down-scaling and values less than or equal to 8 are supported for up-scaling.

API Syntax

template<int INTERPOLATION_TYPE, int TYPE, int SRC_ROWS, int SRC_COLS, int DST_ROWS, int DST_COLS, int NPC,int MAX_DOWN_SCALE> 
void resize (xf::Mat<TYPE, SRC_ROWS, SRC_COLS, NPC> & _src, xf::Mat<TYPE, DST_ROWS, DST_COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 364. resize Function Parameter Descriptions
Parameter Description
INTERPOLATION_TYPE Interpolation type. The different options possible are
  • XF_INTERPOLATION_NN – Nearest Neighbor Interpolation
  • XF_INTERPOLATION_BILINEAR – Bilinear interpolation
  • XF_INTERPOLATION_AREA – Area Interpolation
TYPE Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
SRC_ROWS Maximum Height of input image for which the hardware kernel would be built.
SRC_COLS Maximum Width of input image for which the hardware kernel would be built (must be a multiple of 8).
DST_ROWS Maximum Height of output image for which the hardware kernel would be built.
DST_COLS Maximum Width of output image for which the hardware kernel would be built (must be a multiple of 8).
NPC Number of pixels to be processed per cycle. Possible options are XF_NPPC1 (1 pixel per cycle) and XF_NPPC8 (8 pixel per cycle).
MAX_DOWN_SCALE Set to 2 for all 1 pixel modes, and for upscale in x direction. When down scaling in x direction in 8-pixel mode, please set this parameter to the next highest integer value of the down scale factor i.e., if downscaling from 1920 columns to 1280 columns, set to 2. For 1920 to 640, set to 3.
_src Input Image
_dst Output Image

Resource Utilization

The following table summarizes the resource utilization of Resize function in Resource Optimized (8 pixel) mode and Normal mode, as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA.

Table 365. resize Function Resource Utilization Summary
Operating Mode Utilization Estimate
1 Pixel (at 300 MHz) 8 Pixel (at 150MHz)
IMAGESIZE LUTs FFs DSPs BRAMs IMAGESIZE LUTs FFs DSPs BRAMs
Downscale Nearest Neighbor 1920X1080 TO 960X1620 1089 1593 4 2 3840X2160 TO 1920X1080 2545 2250 4 12
Downscale Bilinear 1920X1080 TO 960X1080 1340 1846 8 2 3840X2160 TO 1920X1080 5159 3092 36 12
Downscale Area 3840X2160 TO 1920X1080 2341 3550 44 24 Configuration not supported
Upscale Nearest Neighbor 1920X1080 TO 3840X540 1089 1593 4 2 1920X1080 TO 3840X2160 1818 1686 4 6
Upscale Bilinear 1920X1080 TO 3840X540 1340 1846 8 2 1920X1080 TO 3840X2160 3697 2739 36 6
Upscale Area 1920X1080 TO 3840X2160 1312 2220 16 12 Configuration not supported

The following table summarizes the resource utilization of Resize function in Normal mode, as generated in the Vivado HLS 2019.1 tool for the Xilinx xczu9eg-ffvb1156-2-i-es2 FPGA for 3channel image as input.

Table 366. resize Function Resource Utilization Summary
Operating Mode Utilization Estimate
1 Pixel (at 300 MHz)
IMAGESIZE LUTs FFs DSPs BRAMs
Downscale Nearest Neighbor 3840X2160 TO 1920X108 1184 168 4 18
Downscale Bilinear 3840X2160 TO 1920X1080 1592 2058 14 18
Downscale Area 3840X2160 TO 1920X1080 3212 4777 104 72
Upscale Nearest Neighbor 1920X1080 TO 3840X2160 1166 1697 4 9
Upscale Bilinear 1920X1080 TO 3840X2160 1574 2053 14 9
Upscale Area 1920X1080 TO 3840X2160 1731 2733 36 31

Performance Estimate

The following table summarizes the performance estimation of Resize for various configurations, as generated in the Vivado HLS 2019.1 tool for the xczu9eg-ffvb1156-2-i-es2 FPGA at 300 MHz to resize a grayscale image from 1080x1920 to 480x640 (downscale); and to resize a grayscale image from 1080x1920 to 2160x3840 (upscale). This table also shows the latencies obtained for different interpolation types.

Table 367. resize Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Latency Estimate (ms)

Downscale

NN

Downscale

Bilinear

Downscale

Area

Upscale

NN

Upscale

Bilinear

Upscale

Area
1 pixel 300 6.94 6.97 7.09 27.71 27.75 27.74

BGR2HSV

The BGR2HSV function converts the input image color space to HSV color space and returns the HSV image as the output.

API Syntax

template<int SRC_T, int ROWS, int COLS,int NPC=1>
          void BGR2HSV(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst_mat)

Parameter Descriptions

The table below describes the template and the function parameters.
Parameter Description
SRC_T Input pixel type should be XF_8UC3
DST_T Output pixel type should be XF_8UC3
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle. Only XF_NPPC1 is supported.
_src_mat Input image
_dst_mat Output image

convertScaleAbs

The convertScaleAbs function converts an input image src with optional linear transformation, save the result as image dst.

dst(x,y)= src1(x,y)*scale+shift

API Syntax


template< int SRC_T,int DST_T, int ROWS, int COLS, int NPC = 1>
void convertScaleAbs(xf::Mat<SRC_T, ROWS, COLS, NPC> & src1, xf::Mat<DST_T, ROWS, COLS, NPC> & dst,float scale, float shift)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 368. convertScaleAbs Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1).
DST_T Output pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
src1 Input image
scale Scale factor
shift Delta/shift added to scaled value.
dst Output image

Resource Utilization

The following table summarizes the resource utilization of the convertScaleAbs function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 369. convertScaleAbs Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 10 38
FF 949 1971
LUT 1052 1522
CLB 218 382

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image...

Table 370. convertScaleAbs Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Scharr Filter

The Scharr function computes the gradients of input image in both x and y direction by convolving the kernel with input image being processed.

For Kernel size 3x3:

  • GradientX:

  • GradientY:

API Syntax

template<int BORDER_TYPE, int SRC_T,int DST_T, int ROWS, int COLS,int NPC=1>
void Scharr(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_matx,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_maty)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 371. Scharr Function Parameter Descriptions
Parameter Description
BORDER_TYPE Border type supported is XF_BORDER_CONSTANT
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type. Only 8-bit unsigned, 16-bit signed,1 and 3 channels are supported (XF_8UC1, XF_16SC1,XF_8UC3 and XF_16SC3)
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src_mat Input image
_dst_matx X gradient output image.
_dst_maty Y gradient output image.

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 372. Scharr Function Resource Utilization Summary
Name Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 3 6
DSP48E 0 0
FF 728 1434
LUT 812 2481
CLB 171 461

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3 channel image.

Table 373. Scharr Function Resource Utilization Summary
Name Resource Utilization
1 pixel
300 MHz
BRAM_18K 18
DSP48E 0
FF 1911
LUT 1392

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 374. Scharr Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

Latency

(ms)
1 pixel 300 7.2
8 pixel 150 1.7

Set

The Set function sets the each pixel in input image to a given scalar value and stores the result in dst.

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void set(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)], xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 375. Set Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle.
_src1 First input image
_scl Scalar value
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Set function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 376. Set Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 87 87
LUT 43 42
CLB 17 18

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 377. Set Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Sobel Filter

The Sobel function Computes the gradients of input image in both x and y direction by convolving the kernel with input image being processed.

  • For Kernel size 3x3
    • GradientX:

    • GradientY:

  • For Kernel size 5x5
    • GradientX:

    • GradientY:

  • For Kernel size 7x7
    • GradientX:

    • GradientY:

API Syntax

template<int BORDER_TYPE,int FILTER_TYPE, int SRC_T,int DST_T, int ROWS, int COLS,int NPC=1,bool USE_URAM=false>
void Sobel(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_matx,xf::Mat<DST_T, ROWS, COLS, NPC> & _dst_maty)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 378. Sobel Function Parameter Descriptions
Parameter Description
FILTER_TYPE Filter size. Filter size of 3 (XF_FILTER_3X3), 5 (XF_FILTER_5X5) and 7 (XF_FILTER_7X7) are supported.
BORDER_TYPE Border Type supported is XF_BORDER_CONSTANT
SRC_T Input pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
DST_T Output pixel type. Only 8-bit unsigned, 16-bit signed,1 and 3 channels are supported (XF_8UC1, XF_16SC1,XF_8UC3 and XF_16SC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
USE_URAM Enable to map storage structures to UltraRAM
_src_mat Input image
_dst_matx X gradient output image.
_dst_maty Y gradient output image.
  1. Sobel 7x7 8-pixel is not supported.

Resource Utilization

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 379. Sobel Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 3x3 300 3 0 609 616 135
5x5 300 5 0 1133 1499 308
7x7 300 7 0 2658 3334 632
8 pixel 3x3 150 6 0 1159 1892 341
5x5 150 10 0 3024 5801 999

The following table summarizes the resource utilization of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a 4K 3 Channel image.

Table 380. Sobel Function Resource Utilization Summary
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT
1 pixel 3x3 300 18 0 1047 1107
5x5 300 30 0 5370 3312
7x7 300 42 0 6100 5496

The following table summarizes the resource utilization of the kernel in different configurations, generated using SDx 2019.1 tool for the Xilinx xczu7ev-ffvc1156-2-e FPGA, to process a grayscale 4K (3840x2160) image with UltraRAM enable.

Table 381. Sobel Function Resource Utilization Summary with UltraRAM enable
Operating Mode Filter Size

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K URAM DSP_48Es FF LUT
1 pixel 3x3 300 0 1 0 919 707
5x5 300 0 1 0 2440 1557
7x7 300 0 1 0 4066 3495
8 pixel 3x3 150 0 3 0 1803 2050
5x5 150 0 5 0 4159 6817

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 382. Sobel Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

 Filter Size Latency Estimate

(ms)
1 pixel 300 3x3 7.5
300 5x5 7.5
300 7x7 7.5
8 pixel 150 3x3 1.7
150 5x5 1.71

Semi Global Method for Stereo Disparity Estimation

Stereo matching algorithms are used for finding relative depth from a pair of rectified stereo images. The resultant disparity information can be used for 3D reconstruction by triangulation, using the known intrinsic and extrinsic parameters of the stereo camera. The Semi global method for stereo disparity estimation aggregates the cost in terms of dissimilarity across multiple paths leading to a smoother estimate of the disparity map.

For the semi-global method in xfOpenCV, census transform in conjunction with Hamming distance is used for cost computation. The semiglobal optimization block is based on the implementation by Hirschmuller, but approximates the cost aggregation by considering only four directions.

Parallelism is achieved by computing and aggregating cost for multiple disparities in parallel, and this parameter is included as a compile-time input.

API Syntax

template<int BORDER_TYPE, int WINDOW_SIZE, int NDISP, int PU, int R, int SRC_T, int DST_T, int ROWS, int COLS, int NPC>
void SemiGlobalBM(xf::Mat<SRC_T,ROWS,COLS,NPC> & _src_mat_l, xf::Mat<SRC_T,ROWS,COLS,NPC> & _src_mat_r, xf::Mat<DST_T,ROWS,COLS,NPC> & _dst_mat, uint8_t p1, uint8_t p2)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 383. SemiGlobalBM Function Parameter Descriptions
Parameter Description
BORDER_TYPE The border pixels are processed in Census transform function based on this parameter. Only XF_BORDER_CONSTANT is supported.
WINDOW_SIZE Size of the window used for Census transform computation. Only ‘5’ (5x5) is supported.
NDISP Number of disparities
PU Number of disparity units to be computed in parallel
R Number of directions for cost aggregation. It must be 2, 3, or 4.
SRC_T Type of input image Mat object. It must be XF_8UC1.
DST_T Type of output disparity image Mat object. It must be XF_8UC1.
ROWS Maximum height of the input image.
COLS Maximum width of the input image.
NPC Number of pixels to be computed in parallel. It must be XF_NPPC1.
_src_mat_l Left input image Mat
_src_mat_r Right input image Mat
_dst_mat Output disparity image Mat
p1 Small penalty for cost aggregation
p2 Large penalty for cost aggregation. The maximum value is 100.

Resource Utilization

The following table summarizes the resource utilization for a 1920 x 1080 image, with 64 number of disparities, and 32 parallel units.

Table 384. SemiGlobalBM Function Resource Utilization Summary
Operating Mode

Filter Size

 Operating Frequency (MHz) Resource Utilization
BRAM_18k DSP48E FF LUT
1 pixel 5x5 200 205 141 11856 19102

Performance Estimate

The following table summarizes a performance estimate for a 1920x1080 image.

Table 385. SemiGlobalBM Function Performance Estimate Summary
Operating Mode Operating Frequency Number of Disparities Parallel Units Latency
1 pixel/clock 200 MHz 64 32 42 ms

Semi Global Method for Stereo Disparity Estimation

Stereo matching algorithms are used for finding relative depth from a pair of rectified stereo images. The resultant disparity information can be used for 3D reconstruction by triangulation, using the known intrinsic and extrinsic parameters of the stereo camera. The Semi global method for stereo disparity estimation aggregates the cost in terms of dissimilarity across multiple paths leading to a smoother estimate of the disparity map.

For the semi-global method in xfOpenCV, census transform in conjunction with Hamming distance is used for cost computation. The semiglobal optimization block is based on the implementation by Hirschmuller, but approximates the cost aggregation by considering only four directions.

Parallelism is achieved by computing and aggregating cost for multiple disparities in parallel, and this parameter is included as a compile-time input.

API Syntax

template<int BORDER_TYPE, int WINDOW_SIZE, int NDISP, int PU, int R, int SRC_T, int DST_T, int ROWS, int COLS, int NPC>
void SemiGlobalBM(xf::Mat<SRC_T,ROWS,COLS,NPC> & _src_mat_l, xf::Mat<SRC_T,ROWS,COLS,NPC> & _src_mat_r, xf::Mat<DST_T,ROWS,COLS,NPC> & _dst_mat, uint8_t p1, uint8_t p2)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 386. SemiGlobalBM Function Parameter Descriptions
Parameter Description
BORDER_TYPE The border pixels are processed in Census transform function based on this parameter. Only XF_BORDER_CONSTANT is supported.
WINDOW_SIZE Size of the window used for Census transform computation. Only ‘5’ (5x5) is supported.
NDISP Number of disparities
PU Number of disparity units to be computed in parallel
R Number of directions for cost aggregation. It must be 2, 3, or 4.
SRC_T Type of input image Mat object. It must be XF_8UC1.
DST_T Type of output disparity image Mat object. It must be XF_8UC1.
ROWS Maximum height of the input image.
COLS Maximum width of the input image.
NPC Number of pixels to be computed in parallel. It must be XF_NPPC1.
_src_mat_l Left input image Mat
_src_mat_r Right input image Mat
_dst_mat Output disparity image Mat
p1 Small penalty for cost aggregation
p2 Large penalty for cost aggregation. The maximum value is 100.

Resource Utilization

The following table summarizes the resource utilization for a 1920 x 1080 image, with 64 number of disparities, and 32 parallel units.

Table 387. SemiGlobalBM Function Resource Utilization Summary
Operating Mode

Filter Size

 Operating Frequency (MHz) Resource Utilization
BRAM_18k DSP48E FF LUT
1 pixel 5x5 200 205 141 11856 19102

Performance Estimate

The following table summarizes a performance estimate for a 1920x1080 image.

Table 388. SemiGlobalBM Function Performance Estimate Summary
Operating Mode Operating Frequency Number of Disparities Parallel Units Latency
1 pixel/clock 200 MHz 64 32 42 ms

SubRS

The SubRS function subtracts the intensity of the source image from a scalar image and stores it in the destination image.

dst(I)= scl - src(I)

API Syntax

template<int POLICY_TYPE, int SRC_T, int ROWS, int COLS, int NPC =1>
void subRS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)],xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 389. SubRS Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First Input image
_scl Input scalar value,the size should be number of channels
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the SubRS function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 390. SubRS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 103 104
LUT 44 133
CLB 23 43

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 391. SubRS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

SubS

The SubS function subtracts a scalar value from the intensity of source image and stores it in the destination image.

dst(I)= src(I) - scl

API Syntax

template<int POLICY_TYPE, int SRC_T, int ROWS, int COLS, int NPC =1>
void subS(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1, unsigned char _scl[XF_CHANNELS(SRC_T,NPC)],xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 392. SubS Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 First Input image
_scl Input scalar value, the size should be the number of channels.
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the SubS function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 393. SubS Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 103 104
LUT 44 133
CLB 23 43

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 394. SubS Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7

Sum

The sum function calculates the sum of all pixels in input image.

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void sum(xf::Mat<SRC_T, ROWS, COLS, NPC> & src1,double sum[XF_CHANNELS(SRC_T,NPC)])

Parameter Descriptions

The following table describes the template and the function parameters.

Table 395. Sum Function Parameter Descriptions
Parameter Description
SRC_T Input pixel type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image (must be multiple of 8).
NPC Number of pixels to be processed per cycle.
_src1 Input image.
sum Array to store sum of all pixels in the image.

Resource Utilization

The following table summarizes the resource utilization of the Sum function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 396. Sum Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 341 408
LUT 304 338
CLB 71 87

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 397. Sum Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300  
8 pixel 150  

SVM

The SVM function is the SVM core operation, which performs dot product between the input arrays. The function returns the resultant dot product value with its fixed point type.

API Syntax

template<int SRC1_T, int SRC2_T, int DST_T, int ROWS1, int COLS1, int ROWS2, int COLS2, int NPC=1, int N>
void SVM(xf::Mat<SRC1_T, ROWS1, COLS1, NPC> &in_1, xf::Mat<SRC2_T, ROWS2, COLS2, NPC> &in_2, uint16_t idx1, uint16_t idx2, uchar_t frac1, uchar_t frac2, uint16_t n, uchar_t *out_frac, ap_int<XF_PIXELDEPTH(DST_T)> *result)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 398. SVM Function Parameter Descriptions
Parameters Description
SRC1_T Input pixel type. 16-bit, signed, 1 channel (XF_16SC1) is supported.
SRC2_T Input pixel type. 16-bit, signed, 1 channel (XF_16SC1) is supported.
DST_T Output data Type. 32-bit, signed, 1 channel (XF_32SC1) is supported.
ROWS1 Number of rows in the first image being processed.
COLS1 Number of columns in the first image being processed.
ROWS2 Number of rows in the second image being processed.
COLS2 Number of columns in the second image being processed.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1.
N Max number of kernel operations
in_1 First Input Array.
in_2 Second Input Array.
idx1 Starting index of the first array.
idx2 Starting index of the second array.
frac1 Number of fractional bits in the first array data.
frac2 Number of fractional bits in the second array data.
n Number of kernel operations.
out_frac Number of fractional bits in the resultant value.
result Resultant value

Resource Utilization

The following table summarizes the resource utilization of the SVM function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 399. SVM Function Resource Utilization Summary

Operating Frequency (MHz)

 Utilization Estimate (ms)
BRAM_18K DSP_48Es FF LUT CLB
300 0 1 27 34 12

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 400. SVM Function Performance Estimate Summary

Operating Frequency (MHz)

 Latency Estimate
Min (cycles) Max (cycles)
300 204 204

Thresholding

The Threshold function performs thresholding operation on the input image. There are several types of thresholding supported by the function.

API Syntax

template<int THRESHOLD_TYPE, int SRC_T, int ROWS, int COLS,int NPC=1>
void Threshold(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src_mat,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst_mat,short int thresh,short int maxval )

Parameter Descriptions

The following table describes the template and the function parameters.
Table 401. Threshold Function Parameter Descriptions
Parameter Description
THRESHOLD_TYPE Type of thresholding.
SRC_T Input pixel type. Only 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. Must be multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed per cycle.
_src_mat Input image
_dst_mat Output image
thresh Threshold value.
maxval Maximum value to use with the THRESH_BINARY and THRESH_BINARY_INV thresholding types.

Resource Utilization

The following table summarizes the resource utilization of the kernel with binary thresholding in different configurations, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1 FPGA, to process a grayscale HD (1080x1920) image.
Table 402. Threshold Function Resource Utilization Summary
Configurations Resource Utilization
1 pixel 8 pixel
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 110 154
LUT 61 139
CLB 16 37

Performance Estimate

The following table summarizes the performance of the kernel in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1, to process a grayscale HD (1080x1920) image.
Table 403. Threshold Function Performance Estimate Summary
Operating Mode

Operating Frequency

(MHz)

Latency Estimate

(ms)
1 pixel 300 7.2
8 pixel 150 1.7

Atan2

The Atan2LookupFP function finds the arctangent of y/x. It returns the angle made by the vector with respect to origin. The angle returned by atan2 will also contain the quadrant information.

Atan2LookupFP is a fixed point version of the standard atan2 function. This function implements the atan2 using a lookup table approach. The values in the look up table are represented in Q4.12 format and so the values returned by this function are in Q4.12. A maximum error of 0.2 degrees is present in the range of 89 to 90 degrees when compared to the standard atan2 function available in glibc. For the other angles (0 to 89) the maximum error is in the order of 10-3. This function returns 0 when both xs and ys are zeroes.

API Syntax

short Atan2LookupFP(short xs, short ys, int M1,int N1,int M2, int N2)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 404. Atan2LookupFP Function Parameter Descriptions
Parameter Description
xs 16-bit signed value x in fixed point format of QM1.N1
ys 16-bit signed value y in fixed point format of QM2.N2
M1 Number of bits to represent integer part of x.
N1 Number of bits to represent fractional part of y. Must be equal to 16-M1.
M2 Number of bits to represent integer part of y.
N2 Number of bits to represent fractional part of y. Must be equal to 16-N1.
Return Return value is in radians. Its range varies from -pi to +pi in fixed point format of Q4.12

Resource Utilization

The following table summarizes the resource utilization of the Atan2LookupFP function , generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 405. Atan2LookupFP Function Resource Utilization Summary

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
300 4 2 275 75 139

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 406. Atan2LookupFP Function Performance Estimate Summary

Operating Frequency

(MHz)

 Latency Estimate
Min (cycles) Max (cycles)
300 1 15

Inverse (Reciprocal)

The Inverse function computes the reciprocal of a number x. The values of 1/x are stored in a look up table of 2048 size. The index for picking the 1/x value is computed using the fixed point format of x. Once this index is computed, the corresponding 1/x value is fetched from the look up table and returned along with the number of fractional bits needed to represent this value in fixed point format.

API Syntax

unsigned int Inverse(unsigned short x,int M,char *N)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 407. Inverse Function Parameter Descriptions
Parameter Description
x 16-bit unsigned value x in fixed point format of QM.(16-M)
M Number of bits to represent integer part of x.
N Pointer to a char variable which stores the number of bits to represent fractional part of 1/x. This value is returned from the function.
Return 1/x value is returned in 32-bit format represented by a fixed point format of Q(32-N).N

Resource Utilization

The following table summarizes the resource utilization of the Inverse function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 408. Inverse Function Resource Utilization Summary

Operating Frequency

(MHz)

 Utilization Estimate (ms)
BRAM_18K DSP_48Es FF LUT CLB
300 4 0 68 128 22

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 409. Inverse Function Performance Estimate Summary

Operating Frequency

(MHz)

 Latency Estimate
Min (cycles) Max (cycles)
300 1 8

Look Up Table

The LUT function performs the table lookup operation. Transforms the source image into the destination image using the given look-up table. The input image must be of depth XF_8UP and the output image of same type as input image.

Iout(x, y) = LUT [Iin1(x, y)]

Where:

  • Iout(x, y) is the intensity of output image at (x, y) position
  • Iin(x, y) is the intensity of first input image at (x, y) position
  • LUT is the lookup table of size 256 and type unsigned char.

API Syntax

template <int SRC_T, int ROWS, int COLS,int NPC=1>
void LUT(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src, xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst,unsigned char* _lut)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 410. LUT Function Parameter Descriptions
Parameter Description
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Number of rows in the image being processed.
COLS Number of columns in the image being processed. Must be a multiple of 8, for 8-pixel operation.
NPC Number of pixels to be processed in parallel. Possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src Input image of size (ROWS, COLS) and type 8U.
_dst Output image of size (ROWS, COLS) and same type as input.
_lut Input lookup Table of size 256 and type unsigned char.

Resource Utilization

The following table summarizes the resource utilization of the LUT function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 411. LUT Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 1 0 937 565 137
8 pixel 150 9 0 1109 679 162

The following table summarizes the resource utilization of the LUT function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process 4K 3Channel image.

Table 412. LUT Function Resource Utilization Summary
Operating Mode

Operating Frequency (MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
1 pixel 300 4 0 1160 648 175

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1, to process a grayscale HD (1080x1920) image.

Table 413. LUT Function Performance Estimate Summary
Operating Mode Latency Estimate
Max Latency
1 pixel operation (300 MHz) 6.92 ms
8 pixel operation (150 MHz) 1.66 ms

Square Root

The Sqrt function computes the square root of a 16-bit fixed point number using the non-restoring square root algorithm. The non-restoring square root algorithm uses the two's complement representation for the square root result. At each iteration the algorithm can generate exact result value even in the last bit.

Input argument D must be 16-bit number, though it is declared as 32-bit. The output sqrt(D) is 16-bit type. If format of D is QM.N (where M+N = 16) then format of output is Q(M/2).N

To get a precision of 'n' bits in fractional part, you can simply left shift the radicand (D) by '2n' before the function call and shift the solution right by 'n' to get the correct answer. For example, to find the square root of 35 (011000112) with one bit after the decimal point, that is, N=1:

  1. Shift the number (01100011002) left by 2
  2. Shift the answer (10112) right by 1. The correct answer is 101.1, which is 5.5.

API Syntax

int Sqrt(unsigned int D)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 414. Sqrt Function Parameter Descriptions
Parameter Description
D Input data in a 16-bit fixed-point format.
Return Output value in short int format.

Resource Utilization

The following table summarizes the resource utilization of the Sqrt function, generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 415. Sqrt Function Resource Utilization Summary

Operating Frequency

(MHz)

 Utilization Estimate
BRAM_18K DSP_48Es FF LUT CLB
300 0 0 8 6 1

Performance Estimate

The following table summarizes the performance in different configurations, as generated using Vivado HLS 2019.1 tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 416. Sqrt Function Performance Estimate Summary

Operating Frequency

(MHz)

 Latency Estimate
Min (cycles) Max (cycles)
300 18 18

WarpTransform

The warpTransform function is designed to perform the perspective and affine geometric transformations on an image. The type of transform is a compile time parameter to the function.

The function uses a streaming interface to perform the transformation. Due to this and due to the fact that geometric transformations need access to many different rows of input data to compute one output row, the function stores some rows of the input data in block RAMs/UltraRAMs. The number of rows the function stores can be configured by the user by modifying a template parameter. Based on the transformation matrix, you can decide on the number of rows to be stored. You can also choose when to start transforming the input image in terms of the number of rows of stored image.

Affine Transformation

The transformation matrix consists of size parameters, and is as shown:

Affine transformation is applied in the warpTransform function following the equation:

Perspective Transformation

The transformation matrix is a 3x3 matrix as shown below:

Perspective transformation is applied in warpTransform following the equation:

The destination pixel is then computed by dividing the first two dimensions of the dst1 by the third dimension

API Syntax

template<int STORE_LINES, int START_ROW, int TRANSFORMATION_TYPE, int INTERPOLATION_TYPE, int SRC_T, int ROWS, int COLS, int NPC=1,bool USE_URAM=false>
void warpTransform(xf::Mat<SRC_T, ROWS, COLS, NPC> & src, xf::Mat<SRC_T, ROWS, COLS, NPC> & dst, float *transformation_matrix)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 417. warpTransform Function Parameter Descriptions
Parameter Description
STORE_LINES Number of lines to store an input to process a given transformation.
START_ROW Number of the input rows to store before starting the image transformation. This must be less than or equal to STORE_LINES.
TRANSFORMATION_TYPE Affine and perspective transformations are supported. Set this flag to ‘0’ for affine and ‘1’ for perspective transformation.
INTERPOLATION_TYPE Set flag to ‘1’ for bilinear interpolation and ‘0’ for nearest neighbor interpolation.
SRC_T Input and Output pixel type. Only 8-bit, unsigned, 1 and 3 channels are supported (XF_8UC1 and XF_8UC3)
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image.
NPC Number of pixels to be processed per cycle; only one-pixel operation supported (XF_NPPC1).
USE_URAM Enable to map some storage structures to UltraRAM
src Input image
dst Output image
transformation_matrix Transformation matrix that is applied to the input image.

Resource Utilization

The following table summarizes the resource utilization of the Warp transform, generated using Vivado HLS 2019.1 version tool for the Xilinx Number of lines of the image that need to be buffered locally on FPGA.Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 418. warpTransform Function Resource Utilization Summary
Transformation INTERPOLATION _TYPE STORE _LINES START _ROW

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
Perspective Bilinear 100 50 300 7468 9804 61 112
Perspective Nearest Neighbor 100 50 300 4514 6761 35 104
Affine Bilinear 100 50 300 6139 5606 40 124
Affine Nearest Neighbor 100 50 300 4611 4589 18 112

Number of lines of the image that need to be buffered locallyThe following table summarizes the resource utilization of the Warp transform, generated using Vivado HLS 2019.1 version tool for the Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a BGR 4K image.

Table 419. warpTransform Function Resource Utilization Summary
Transformation INTERPOLATION _TYPE STORE _LINES START _ROW

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs
Perspective Bilinear 100 50 300 9192 7910 48 616
Perspective Nearest Neighbor 100 50 300 10533 12055 69 604
Affine Bilinear 100 50 300 6397 8415 35 604

The following table summarizes the resource utilization of the Warp transform, generated using SDx 2019.1 version tool for the Xilinx xczu7ev-ffvc1156-2-e FPGA, to progress a grayscale 4K image with UltraRAM enabled.

Table 420. warpTransform Function Resource Utilization Summary with UltraRAM Enable
Transformation INTERPOLATION _TYPE STORE _LINES START _ROW

Operating Frequency

(MHz)

 Utilization Estimate
LUTs FFs DSPs BRAMs URAM
Perspective Bilinear 100 50 300 7820 12458 61 7 12
Perspective Nearest Neighbor 100 50 300 4880 8323 35 2 6
Affine Bilinear 100 50 300 6850 9516 40 13 12
Affine Nearest Neighbor 100 50 300 4651 6548 18 6 6

Performance Estimate

The following table summarizes a performance estimate of the Warp transform, as generated using Vivado HLS 2019.1 tool for Xilinx Xczu9eg-ffvb1156-1-i-es1 FPGA, to process a grayscale HD (1080x1920) image.

Table 421. warpTransform Function Performance Estimate Summary
Transformation INTERPOLATION _TYPE STORE _LINES START _ROW

Operating Frequency

(MHz)

Latency Estimate

Max (ms)
Perspective Bilinear 100 50 300 7.46
Perspective Nearest Neighbor 100 50 300 7.31
Affine Bilinear 100 50 300 7.31
Affine Nearest Neighbor 100 50 300 7.24

Zero

The Zero function sets the each pixel in input image to zero and stores the result in dst.

API Syntax

template< int SRC_T , int ROWS, int COLS, int NPC=1>
void zero(xf::Mat<SRC_T, ROWS, COLS, NPC> & _src1,xf::Mat<SRC_T, ROWS, COLS, NPC> & _dst)

Parameter Descriptions

The following table describes the template and the function parameters.

Table 422. Zero Function Parameter Descriptions
Parameter Description
SRC_T Input Pixel Type. 8-bit, unsigned, 1 channel is supported (XF_8UC1).
ROWS Maximum height of input and output image.
COLS Maximum width of input and output image. In case of N-pixel parallelism, width should be multiple of N.
NPC Number of pixels to be processed per cycle; possible options are XF_NPPC1 and XF_NPPC8 for 1 pixel and 8 pixel operations respectively.
_src1 Input image
_dst Output image

Resource Utilization

The following table summarizes the resource utilization of the Zero function in Resource optimized (8 pixel) mode and normal mode as generated using Vivado HLS 2019.1 version tool for the Xczu9eg-ffvb1156-1-i-es1 FPGA.

Table 423. Zero Function Resource Utilization Summary
Name Resource Utilization
1 pixel per clock operation 8 pixel per clock operation
300 MHz 150 MHz
BRAM_18K 0 0
DSP48E 0 0
FF 78 78
LUT 42 41
CLB 15 14

Performance Estimate

The following table summarizes a performance estimate of the kernel in different configurations, generated using Vivado HLS 2019.1 tool for Xczu9eg-ffvb1156-1-i-es1 FPGA to process a grayscale HD (1080x1920) image.

Table 424. Zero Function Performance Estimate Summary
Operating Mode Latency Estimate
Operating Frequency (MHz) Latency (ms)
1 pixel 300 6.9
8 pixel 150 1.7
1 N. Dalal, B. Triggs: Histograms of oriented gradients for human detection, IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2005.