2. 技术支持
  3. AR# 3499: M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt

AR# 3499

|

M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt

描述

Keywords: x45dr, PAR, 1.4, basrt, EC, pin, unroute

Urgency: Standard

General Description: Following error/warnings occur when
trying to run a design through M1.4 that uses the OMUX in
the IOB and also makes use of the GND availble at the EC
pin in the IOB to drive the OMUX.

ERROR:x45dr - netcheck: Signal BUF0/USClk3/lastClkEn is routed to the O pin of
block sClkOut<3> on routing which is not available because the EC pin is
using the Logic Zero option. Re-route the connection to the O pin without
using the wire shared with the EC pin.
WARNING:basrt - Error found on signal: BUF0/USClk3/lastClkEn, leaving it
unrouted.

解决方案

This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 3499
日期 10/20/2008
状态 Archive
Type 综合文章
People Also Viewed