AR# 39037
|Power - TI Power Solutions for measuring power on Xilinx Evaluation Kits
描述
How do I use TI Power Solutions to measure the power on Xilinx Evaluation Kits?解决方案
The TI Fusion Digital Power Designer can be used to monitor voltage and current levels, and read power.
The TI Fusion Digital Power Manufacturing Tool can be used to restore the TI power controllers on Xilinx Evaluation Kits (6 and 7 Series) to the factory defaults.
To download the TI Fusion Tools, go to the Texas Instruments website:
TI Fusion Digital Power Designer
TI Fusion Digital Power Manufacturing Tool
To use these tools with a 6 or 7 Series board, see the following instructions:
1. Plug in the TI USB Interface Adapter to the PC and the Evaluation Kit.
2. Power on the Evaluation Kit.
3. Start the TI Fusion Digital Power Manufacturing Tool GUI:
4. Select and load the desired xml script to program the board:
5. Run the programming script by clicking on the "Run Script" tab and clicking "Start".
6. The Operator ID field is irrelevant; click OK and wait for the board to finish programming.
7.The serial number can be left at the Default value:
8. Once this setup is finished, it is time to read back the voltage and current levels.
9.To do this, launch the TI Fusion Digital Power Designer
10. Choose the option: "UCD Controllers and Sequencers, Isolated Controllers (DEVICE_ID)".
11. Check the current and voltage levels by clicking "Monitor" in the lower left hand corner:
Note the rail readings over time.
12. Click "System Dashboard" to view all of the rails for a given location:
For more detailed information on the TI Fusion Digital Power Designer or TI Fusion Digital Power Manufacturing Tool, please visit the Texas Instruments website: http://www.ti.com.
链接问答记录
主要问答记录
| Answer Number | 问答标题 | 问题版本 | 已解决问题的版本 |
|---|---|---|---|
| 61849 | 6 Series and 7 Series Xilinx Evaluation Kits - Known Issues and Release Notes Master Answer Record for the Texas Instruments Power Solution | N/A | N/A |