2. 技术支持
  3. AR# 40452: MIG 7 Series v1.1 - Memory interface should not span both High Range (HR) and High Performance (HP) banks

AR# 40452

|

MIG 7 Series v1.1 - Memory interface should not span both High Range (HR) and High Performance (HP) banks

描述

In MIG 7 Series v1.1, the bank selection page does not prevent the combination of High Range (HR) and High Performance (HP) banks in a memory interface.

This means an interface could be generated where Data and Address/Control are located in both HR and HP banks.

This combination would result in different I/O standards on the same memory interface bus.

MIG should prevent this combination.

解决方案

To work around this GUI issue, ensure that the bank selection for a memory interface is contained within either High Range or High Performance banks. 

The MIG tool properly implements this bank selection rule starting in MIG 7 Series v1.2 (to be released with ISE Design Suite 13.2).

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
40050 MIG 7 Series v1.1 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
40050 MIG 7 Series v1.1 - Release Notes and Known Issues for ISE Design Suite 13.1 N/A N/A
AR# 40452
日期 08/12/2014
状态 Active
Type 综合文章
器件
Tools
IP
People Also Viewed