This answer record contains the Release Notes and Known Issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core and includes the following:
This Release Notes and Known Issues Answer Record is for the core generated in the Vivado 2013.1 tool and later versions.
This core has been discontinued. Please see the Following PDN:
https://www.xilinx.com/support/documentation/customer_notices/xcn17006.pdf
Note: This core is discontinued and will be removed from the Vivado IP catalog in Vivado 2017.2.
General Information
Supported Devices can be found in the following three locations:
For a list of new features and added device support for all versions, see the Change Log file available with the core in Vivado.
Version Table
This table correlates the core version to the first Vivado design tools release version in which it was included.
| Core Version | Vivado Tools Version |
|---|---|
| v2.0 (Rev. 9) | 2017.1 |
| v2.0 (Rev. 8) | 2016.4 |
| v2.0 (Rev. 7) | 2016.3 |
| v2.0 (Rev. 6) | 2016.2 |
| v2.0 (Rev. 5) | 2016.1 |
| v2.0 (Rev. 4) | 2015.4 |
| v2.0 (Rev. 3) | 2015.3 |
| v2.0 (Rev. 2) | 2015.1 |
| v2.0 (Rev. 1) | 2014.4 |
| v2.0 | 2014.3 |
| v1.0 (Rev. 3) | 2014.2 |
| v1.0 (Rev. 2) | 2014.1 |
| v1.0 (Rev. 1) | 2013.4 |
| v1.0 | 2013.3 |
General Guidance
The table below provides Answer Records for general guidance when using the SMPTE2022-1/2 Video Over IP Receiver Core.
| Answer Record | Title |
|---|---|
| (Xilinx Answer 61336) | How do I reduce the transport stream (TS) jitter at the SMPTE2022-1/2 RX? |
Known and Resolved Issues
The following table provides known issues for the LogiCORE IP SMPTE2022-1/2 Video Over IP Receiver Core, starting with v1.0, initially released in the Vivado 2013.3 tool.
Note: The "Version Found" column lists the version the problem was first discovered.
The problem might also exist in earlier versions, but no specific testing has been performed to verify earlier versions.
| Answer Record | Title | Version Found | Version Resolved |
|---|---|---|---|
| (Xilinx Answer 68742) | Why do I see repetition of TS Packets on the Transport Stream Interface? | 2.0 (Rev. 7) | N/A |
| (Xilinx Answer 62219) | Why do I see a negative slack violation when generating with 8 Channels and Forward Error Correction (FEC) and Seamless Switching enabled? | v2.0 | N/A |
| 08/31/2018 | Removed Produce Page links |
| 03/20/2018 | Added (Xilinx Answer 68742) |
| 04/05/2017 | Added v2.0 (Rev.6), v2.0 (Rev.7), v2.0 (Rev.8) and v2.0 (Rev.9) Version Table |
| 04/06/2016 | Added v2.0 (Rev.1), v2.0 (Rev.2), v2.0 (Rev.3), v2.0 (Rev. 4) and v2.0 (Rev.5) Version Table |
| 10/08/2014 | Added v1.0 (Rev.1), v1.0 (Rev.2), v1.0 (Rev.3) and v2.0 Version Table and (Xilinx Answer 62219) |
| 07/02/2014 | Added (Xilinx Answer 61336) |
| 10/23/2013 | Initial release |
| Answer Number | 问答标题 | 问题版本 | 已解决问题的版本 |
|---|---|---|---|
| 56852 | Xilinx Multimedia, Video and Imaging Solution Center - Top Issues | N/A | N/A |
| 69005 | 2017.2 Vivado - Video IP - Where can I find the Video IP that was removed from the 2017.2 release (Modular Media over IP cores)? | N/A | N/A |
| Answer Number | 问答标题 | 问题版本 | 已解决问题的版本 |
|---|---|---|---|
| 61625 | Video IP Example Design Landing Page | N/A | N/A |
| 54533 | LogiCORE IP SMPTE2022-1/2 Video Over IP Transmitter - Release Notes and Known Issues for the Vivado 2013.1 tool and later versions | N/A | N/A |
| AR# 54532 | |
|---|---|
| 日期 | 09/03/2018 |
| 状态 | Archive |
| Type | 版本说明 |
| Tools | |
| IP | |