FMC-BRK Mezzanine Card
by: Zipcores
FMC breakout-card for high-speed connectivity and prototyping. Features matched differential pairs and a ground plane for superior signal integrity. Standard 0.001" (2.54mm) pitch headers and large prototyping area with 100 MHz user osc, LEDs and buttons. The FMC-card is compatible with all Xilinx development boards that feature the standard FMC-LPC or HPC connector (ANSI/VITA 57.1)
主要特性与优势
- Standard ANSI/VITA 57.1 FMC™ LPC connector
- 4 x headers provide passive connectivity to all 160 pins on the FMC connector (rows C,D,G,H)
- All pin and through-hole spacings are standard 0.100” pitch or 2.54 mm
- Access to 34 x differential pairs (LA00:34) or 68 x single-ended signals
- Access to 2 x GTP transceiver pairs including GTP clock
- Access to 2 x user-clock differential pairs
- Access to the I2C, JTAG and FMC state flags
- Access to the VADJ, 3.3V and 12V FMC power supplies
- All differential pairs routed with the same track lengths
- All differential signals impedance-matched for LVDS 100 ohm termination
- Separate VADJ, 3.3V, 12V and GND through-hole vias
- Separate power pins de-coupled to ground with 100 nF capacitors
- Separate PCB ground-plane for improved signal integrity and noise immunity
- Features large 22 x 12 prototyping area for custom circuitry and user-defined functions
- 8 x user LEDs with 332 ohm series resistors
- 4 x user push-buttons with RC de-bouncing circuit
- 100 MHz low-jitter single-ended clock oscillator
- 2 x M3 mounting holes for securing the FMC connector
- 2 x M3 mounting holes for supporting standoff 'legs'
- Dimensions approx 10 x 6.7 cm
- Compatible with a wide range of FMC base-boards