2. 技术支持
  3. AR# 35866: Spartan-6 - Extended Performance Mode VCCINT Max Quiescent values

AR# 35866

|

Spartan-6 - Extended Performance Mode VCCINT Max Quiescent values

描述

The Extended Performance mode for the Spartan-6 Memory Controller Block (MCB) requires a higher nominal VCCINT voltage, as described in (Xilinx Answer 35818). This slight increase in voltage has an affect on quiescent current and power as related to that supply. This Answer Record describes those changes.

解决方案


Extended Performance mode VCCINT and Power Consumption
When using the Extended Performance mode with the tighter VCCINT range forExtended MCB performance, the nominal voltage increases slightly from 1.20V to 1.23V. This increase also increases the quiescent current. The increase can be seen in the Xilinx Power Estimator (XPE) by increasing the VCCINT setting. The specifications in the Spartan-6 data sheet are for the standard VCCINT range. The table below shows the nominal values for 1.20V and 1.23V.

Device
ICCINTQ Typical

1.20V Standard Performance Nominal
1.23V Extended Performance Nominal

LX4, LX9
4mA
4mA

LX16
6mA
7mA

LX25/T
11mA
12mA

LX45/T
15mA
16mA

LX75/T
29mA
32mA

LX100/T
36mA
39mA

LX150/T
51mA
56mA


链接问答记录

相关答复记录

Answer Number 问答标题 问题版本 已解决问题的版本
35818 Design Advisory for Spartan-6 FPGA - Memory Controller Block (MCB) Performance Change for DDR2 Interfaces N/A N/A
AR# 35866
日期 12/15/2012
状态 Active
Type 综合文章
器件
IP
People Also Viewed