AR# 38786
|ML605 - Differential termination might be needed on fanout buffer
描述
The ML605 omits 100 ohm differential termination resistors on certain inputs of the ICS854104 Differential-to-LVDS fanout buffers.These might need to be added in by hand.解决方案
100 ohm differential resistors are needed on the inputsof the ICS854104 buffers on the ML605, U83 and U84.These can be added by hand if the FMC Daughter Card used with the ML605 does not provide termination resistors on the specific pins.The affected signals which require the differential resistors are:- FMC_CLK2_M2C_P
- FMC_CLK2_M2C_N
- FMC_CLK3_M2C_P
- FMC_CLK3_M2C_N
These pins are easily identified in the ML605 schematics and are highlighted below.
FMC_CLK2_M2C_P and FMC_CLK2_M2C_N:
FMC_CLK3_M2C_P and FMC_CLK3_M2C_N:
The pins requiring the termination are 6 and 7 on both U83 and U84 (shown in the following image):
本答复记录是否对您有帮助？
| AR# 38786 | |
|---|---|
| 日期 | 01/21/2013 |
| 状态 | Active |
| Type | 综合文章 |
| Boards & Kits | |
People Also Viewed