AR# 66440

描述

If your Digilent or Xilinx USB cable is not working in Vivado, please follow the instructions below to check if it is installed properly.

解决方案

Run the following command :

ls-al /etc/udev/rules.d

Check if the following two files are present:

52-digilent-usb.rules

52-xilinx-pcusb.rules

If the files above are not present, run the installer from the following directory:

<YOUR_XILINX_INSTALL>/data/xicom/cable_drivers/<lin64 or lin32>/install_drivers/install_drivers

Note: It is important to have the JTAG cable unplugged while you perform the installation.