Please visit the High Speed Serial Product Page for the latest information on Xilinx High Speed Serial offerings.
Xilinx Forums:
Please seek technical support via the Serial Transceiver Board.
The Xilinx Forums are a great resource for technical support. Whether searching for answers or asking new questions, collaborate with Xilinx experts to get the solutions you need.
General Information
Supported Devices
For a list of new features and added device support for all versions, see the Change Log file available with the wizard in Vivado tools.
Table 1 correlates the wizard version to the Vivado design tools release version in which it was included.
Table 1: Version
| GTM Wizard Version | Vivado Version |
|---|---|
| Version 1.0 | 2018.3.1 |
Version 1.0 (Rev. 1) | 2019.1 |
| Version 1.0 (Rev. 2) | 2019.1.1 |
| Version 1.0 (Rev. 2) | 2019.1.2 |
| Version 1.0 (Rev. 3) | 2019.1.3 |
| Version 1.0 (Rev. 4) | 2019.2 |
| Version 1.0 (Rev. 5) | 2019.2.1 |
| Version 1.0 (Rev. 6) | 2019.2.2 |
| Version 1.0 (Rev. 7) | 2020.1 |
| Version 1.0 (Rev. 8) | 2020.1.1 |
| Version 1.0 (Rev. 9) | 2020.2 |
| Version 1.0 (Rev. 10) | 2020.3 |
| Version 1.0 (Rev. 11) | 2021.1 |
Known and Resolved Issues:
Table 2 provides a list of known and resolved issues that apply to UltraScale+ GTM Transceivers Wizard.
Table 2: Known and Resolved Issues for UltraScale+ GTM Transceivers Wizard
| Answer Record | Title | Version Found | Version Fixed |
|---|---|---|---|
| (Xilinx Answer 72645) | UltraScale+ GTM - Instructions for migrating to Vivado 2019.1.2/2019.1.3 | 2019.1.2 | 2019.1.3 |
| (Xilinx Answer 72042) | GTM Near-End PMA Loopback is not supported | 2018.3.1 | 2020.1 |
| (Xilinx Answer 72073) | GTM supports PAM4 data rates of 39.2 Gb/s and greater | 2018.3.1 | 2019.1.3 patch* |
| (Xilinx Answer 72738) | UltraScale+ GTM - Example Design Reports CRITICAL WARNING: [Place 30-1219] on DMONITOROUTCLK Pin | 2019.1.3 | 2019.2 |
| (Xilinx Answer 72822) | Tactical Patch - GTM Wizard and IBERT IP Updates for Vivado 2019.1.3 | 2019.1.3 | N/A |
| (Xilinx Answer 73076) | UltraScale+ GTM - RXRESETMODE should be 2'b01 | 2019.1 | 2019.2.1 |
| (Xilinx Answer 73537) | GTM Fractional Divider Simulations can Fail at Default Simulation Rate | 2019.2.1 | 2020.1 |
| (Xilinx Answer 73536) | GTM Example Design Completes Test Too Early In Some Cases | 2019.2.1 | 2020.1 |
* 2019.1.3 patch is described in (Xilinx Answer 72822).
Table 3 provides a list of known and resolved issues that apply to UltraScale+ GTM IBERT.
Table 3: Known and Resolved Issues for UltraScale+ GTM IBERT
| Answer Record | Title | Version Found | Version Fixed |
|---|---|---|---|
| (Xilinx Answer 72467) | IBERT GTM - Half of the FEC lanes show up as disabled | 2019.1 | 2019.2 |
| (Xilinx Answer 72822) | Tactical Patch - GTM Wizard and IBERT IP Updates for Vivado 2019.1.3 | 2019.1.3 | N/A |
| (Xilinx Answer 75826) | UltraScale+ GTM IBERT shows incorrect Error Counter and Pre-FEC BER in PRBS (RAW) mode | 2020.1 | 2020.2 |
Revision History:
| 03/05/2019 | Initial Release |
| 03/27/2019 | Changed the title of (Xilinx Answer 72073) |
| 06/26/2019 | Added (Xilinx Answer 72467) |
| 08/23/2019 | Added (Xilinx Answer 72645) |
| 09/09/2019 | Added (Xilinx Answer 72738) |
| 10/03/2019 | Added (Xilinx Answer 72822) |
| 10/09/2019 | Updated "Version Fixed" for 2019.1.3 releases |
| 11/12/2019 | Added (Xilinx Answer 73076), included Version correlation table, and updated "Version Fixed" for 2019.2 release |
| 03/06/2020 | Updated "Version Fixed" for 2019.2.1 release |
| 05/15/2020 | Updated for 2020.1 Release. Added (Xilinx Answer 73537) and (Xilinx Answer 73536) |
| 11/11/2020 | Added (Xilinx Answer 75826) |
| 05/20/2021 | Updated for 2021.1 release. |
| Answer Number | 问答标题 | 问题版本 | 已解决问题的版本 |
|---|---|---|---|
| 72073 | GTM supports PAM4 data rates of 39.2 Gb/s and greater | N/A | N/A |
| 72042 | GTM Near-End PMA Loopback is not supported | N/A | N/A |
| 72645 | UltraScale+ GTM - Instructions for migrating to Vivado 2019.1.2/2019.1.3 | N/A | N/A |
| 72467 | IBERT GTM - Half of the FEC lanes show up as disabled in Vivado 2019.1 - [Xicom 50-212] Mismatch in the FEC modes set for CH0 and CH1 | N/A | N/A |
| 72738 | UltraScale+ GTM - Example Design Reports CRITICAL WARNING: [Place 30-1219] on DMONITOROUTCLK Pin | N/A | N/A |
| 72822 | Tactical Patch - GTM Wizard and IBERT IP Updates for Vivado 2019.1.3 | N/A | N/A |
| 73076 | UltraScale+ GTM - RXRESETMODE should be 2'b01 | N/A | N/A |
| 73537 | GTM Fractional Divider Simulations can Fail at Default Simulation Rate | N/A | N/A |
| 73536 | GTM Example Design Completes Test Too Early In Some Cases | N/A | N/A |
| 75826 | UltraScale+ GTM IBERT shows incorrect Error Counter and Pre-FEC BER in PRBS (RAW) mode | N/A | N/A |
| AR# 72071 | |
|---|---|
| 日期 | 08/26/2021 |
| 状态 | Active |
| Type | 版本说明 |
| 器件 | |
| IP | |