2. 技术支持
  3. 设计中心
  4. Zynq UltraScale+ RFSoC

Zynq UltraScale+ RFSoC Design Overview

Design Resources

Design Resources

User Guides and TutorialsDesign FilesDate
 UG1075 - Zynq UltraScale+ Device Packaging and Pinouts Product Specification 07/01/2021
 UG583 - UltraScale Architecture PCB Design User Guide 06/03/2021
 UG440 - Xilinx Power Estimator User Guide 12/20/2018
 UG578 - UltraScale Architecture GTY Transceivers User Guide 09/20/2017
 PG182 - UltraScale FPGAs Transceivers Wizard v1.7 Product Guide for Vivado Design Suite 12/04/2020
 RF Analyzer Tutorial  
White PapersDesign FilesDate
 WP517 - Extending the Thermal Solution by Utilizing Excursion Temperatures 10/23/2019
 WP489 - An Adaptable Direct RF-Sampling Solution 02/20/2019
 WP498 - Integrated SD-FEC in Zynq UltraScale+ RFSoCs for Higher Throughput and Power Efficiency 05/29/2018
 WP509 - Understanding Key Parameters for RF-Sampling Data Converters 02/20/2019
ReportsDesign FilesDate
 Zynq UltraScale+ Characterization Reports  
Design AdvisoriesDesign FilesDate
 AR73277 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: 2018.x-2019.1 XilSKey resets the PS System Monitor configuration 02/07/2020
 AR73282 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: 2018.x/2019.x XilSKey does NOT exit BBRAM Programming Mode 02/07/2020
 AR72994 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC - 2019.1 XilSKey: PPK Hash buffer overflow 11/08/2019
 AR72768 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC - 2019.1 FSBL: Image Header Table (IHT) Buffer Overflow 11/08/2019
 AR72572 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: 2019.1 XilSKeyPUF Registration is incorrect 08/08/2019
 AR72588 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: Encrypt Only Boot Mode - Unauthenticated Boot and Partition Headers 08/08/2019
 AR72499 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC - PS LPDDR4 DRAM devices require WDQS Control to be enabled 04/23/2021
 AR71952 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: A glitch might be observed on the PMU GPO1[2] (MIO34) following assertion of PS_POR_B 04/26/2019
 AR72003 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC - MIO26 cannot be used for GEM TSU_REF_CLK 04/05/2019
 AR71953 - Design Advisory for Zynq UltraScale+ MPSoC/RFSoC Processing System - MIO Slew and Input Type register settings incorrect 04/05/2019
 AR71901 - Design Advisory ZCU104 and ZCU111 - Infineon IRPS5401 has a drive signal of 5V for an external power stage 01/17/2019
 AR70394 - Are Xilinx Zynq-7000 and Zynq UltraScale+ MPSoC & RFSoC devices affected by the Meltdown and Spectre vulnerabilities? 05/15/2018
Design HubsDesign FilesDate
 DH0070 - Zynq UltraScale+ MPSoC Design Overview 06/16/2021
Application NotesDesign FilesDate
 XAPP1331 - Aurora 8B10B for GTY UltraScale+, Zynq UltraScale+ MPSoC and RFSoCDesign Files06/06/2018