2. 技术支持
  3. AR 6248X
  4. AR# 62483: MIG UltraScale 设计咨询（所有存储器类型）— VRP 引脚及 DCI 级联要求

AR# 62483

|

MIG UltraScale 设计咨询（所有存储器类型）— VRP 引脚及 DCI 级联要求

描述

该设计咨询涵盖 MIG UltraScale 内核。

没有使用 DCI 级联时，所有包含存储器接口引脚的 I/O bank 都需要连接 VRP 引脚。

这包括仅输出 bank，例如用于仅地址/控制引脚的 bank。

运行速率超过 2133Mbps 的接口不支持 DCI 级联。

这会影响由 MIG UltraScale 生成的所有存储器接口类型。

解决方案

不使用 DCI 级联的设计：


所有 I/O bank（包括只支持输出的 bank）都需要连接一个 VRP 引脚，因为所有 I/O（“reset_n”除外）都采用 DCI I/O 标准，因而需要 VRP。

在 2014.4 版本中为输出添加了 DCI 标准（例如 SSTL*_DCI），从而使用受控的输出阻抗。

以前输出端使用未校正的输出阻抗选项（而非受控 DCI 版本），需要参考 VRP 引脚上的外部参考电阻来进行校正。

受控输出阻抗增加了校正程序，以补偿温度、工艺或电压变化。

必须遵守UltraScale 架构 FPGA SelectIO 资源用户指南 (UG571) 中的所有 DCI 规则。

//m.alegre-web.com/support/documentation/user_guides/ug571-ultrascale-selectio.pdf


唯一不遵循这一要求的是 reset_n 引脚，因为其不使用 DCI I/O 标准。 

如果将 reset_n 放在非存储器接口 bank 中，就不需要 VRP。

如需更多信息，敬请参考 UltraScale 架构 FPGA 内存 IP 产品指南 (PG150)。

//m.alegre-web.com/support/documentation/ip_documentation/mig/v1_0/pg150-ultrascale-memory-ip.pdf

使用 DCI 级联的设计:


DCI cascading can be supported for interfaces running at and below 2133Mbps.

(PG150) 及存储器接口向导都将进行更新支持Vivado 2016.1 版本，以便包含 DCI 级联支持指南。

必须遵守UltraScale 架构 FPGA SelectIO 资源用户指南 (UG571) 中的所有 DCI 规则。

//m.alegre-web.com/support/documentation/user_guides/ug571-ultrascale-selectio.pdf


修订历史：

2015 年 10 月 30 日 — 经过更新，支持 2133Mbps 和以下 DCI 级联

10/20/14——初始版本

链接问答记录

主要问答记录

Answer Number 问答标题 问题版本 已解决问题的版本
67815 [Synth 8-4169] error in use clause: package 'vcomponents' not found in library 'xpm' N/A N/A
67818 Zynq UltraScale+ MPSoC: 2016.3 PMUFW Loading via JTAG / SD Boot Modes and Running An Example N/A N/A
67819 Zynq UltraScale+ MPSoC: 2016.3 PMUFW, How to add custom initialization code. N/A N/A
N/A N/A
67449 High Speed SelectIO Wizard - How to create multiple instances of the same setup N/A N/A
67442 JESD204B - A simplified approach to achieving robust repeatable latency N/A N/A
67440 AXI Bridge for PCI Express Gen3 (Vivado 2016.1) - [IP_Flow 19-3505] IP Generation error: Failed to generate IP 'axi_pcie3_0'. Failed to generate 'Examples' outputs: N/A N/A
N/A N/A
674 SPROMS, Markings - The XC1700 Ordering ID (part number) and PROM Marking ID are different for the same part N/A N/A
67544 UltraScale DDR4/DDR3 - Tactical Patch - Data errors seen at user interface when using Normal Ordering Error N/A N/A
67543 Vivado 系统生成器 v2016.2 — 无法通过运行系统生成脚本，在 Ubuntu 14.04 中配置和启动 Matlab。 N/A N/A
67548 ECO : Next Generation FPGA Editor N/A N/A
N/A N/A
67684 UltraScale/UltraScale+ Memory IP - moving IP that uses custom memory parts (CSV) might cause problems N/A N/A
6768 Virtex/-E/-II/-II Pro/-4/-5 - Are Virtex devices hot-swap compliant? N/A N/A
67782 2016.2 - Zynq UltraScale - "not whole frame pointed by descriptor" in Linux when testing higher loads on PS ENET N/A N/A
67780 SDK becomes non-responsive when I try to change the BSP setting on an Ubuntu 14 Virtual Machine N/A N/A
67787 2015.4 Vivado — 实现方案设置改变时，比特流 tcl.post 设置被删除 N/A N/A
N/A N/A
N/A N/A
67414 Zynq UltraScale+ MPSoC: 2016.2/2016.1 FSBL unable to load PMU_FW in SD and eMMC boot mode on ZCU102 board N/A N/A
67412 Zynq UltraScale+ MPSoC: 2016.2 FSBL, Added DDR ECC Initialization feature N/A N/A
67416 2016.1 PetaLinux - Installer Automatically Appends Sub-Directory to Target Installation Path N/A N/A
N/A N/A
67922 UltraScale RLDRAM3 - Advanced Traffic Generator (ATG) detects data compare errors when testing with the TG_MAX_NUM_OF_ITER_ADDR parameter is set to a large value N/A N/A
67923 2016.2 PetaLinux Zynq UltraScale+ MPSoC GMII2RGMII on MACB driver N/A N/A
67927 HDMI Transmitter Subsystem v2.0 (Rev. 1) - Why do I sometimes see failures when performing HDCP Authentication? N/A N/A
N/A N/A
67041 软错误缓解 (SEM) IP — 在 Vivado IP 集成器 (IPI) 中使用 UltraScale SEM IP N/A N/A
67045 HDMI RX Subsystem - Do the DDC Signals need to be connected if using the HDMI core in DVI only mode without HDCP? N/A N/A
67043 JESD204 v6.1, v6.2, v7.0 and JESD204 PHY v2.0, v3.0, v3.1 (2015.1, 2015.2, 2015.3, 2015.4, 2016.1) - Defaults to DFE Equalisation mode N/A N/A
67044 JESD204 PHY v2.0, v3.0, v3.1 (2015.1, 2015.2, 2015.3, 2015.4, 2016.1) - TXDIFFCTRL low default value N/A N/A
6704 3.1i Design Manager - How do I specify files (EDN, EDF, VHD, VER, SCH, etc.) to be automatically copied to my version or revision subdirectories for maintenance? N/A N/A
67141 Simulation Libraries - Can I use UNIMACRO libraries in UltraScale and UltraScale Plus? N/A N/A
67147 7 Series Transceivers Wizard - RXPCOMMAALIGNEN and RXMCOMMAALIGNEN should be checked manually in GUI if comma alignment is used in Start from Scratch template N/A N/A
67144 UltraScale+ PCI Express Integrated Block (Vivado 2016.1) - Incorrect GT Quad Location for Virtex 9P Devices N/A N/A
67145 Zynq UltraScale+ MPSoC, Vivado 2016.1 - ILA/IBA cores are not found in Vivado Hardware Manager for ZU3 and ZU15 devices N/A N/A
67142 2016.1 - Simulation - Project Utilities Tcl App update required for Export Simulation N/A N/A
N/A N/A
67280 2016.1 Zynq UltraScale+ MPSoC: FSBL fails to load the PMUFW N/A N/A
67384 Vivado - [Place 30-678] Failed to do clock region partitioning N/A N/A
67382 Vivado Simulation - compile_simlib targetting ModelSim DE fails on Linux 64-bit OS N/A N/A
67381 2016.1 Vivado Hardware Manager: Incorrect IDCODES shown in Vivado Hardware Manager GUI for some UltraScale devices N/A N/A
6738 HP 1.5i Install : 1 archive had fatal errors. file #0. bad zipfile offset (lseek): 0 N/A N/A
67895 2016.4 Vivado IP Flows - When packaging a block design (BD) containing a MicroBlaze block, I get the warning: CRITICAL WARNING: [IP_Flow 19-4791] Block design with Microblaze subdesign IP 'my_design_microblaze_0_0' should be packaged with the XCI option N/A N/A
67892 QuestaSim - Fatal: (vsim-12005) Undefined function '_ZN5boost6system15system_categoryEv' introduced from '/Xilinx/VIVADO/Vivado/2016.1/lib/lnx64.o/librdi_commonxillic.so' is being called N/A N/A
67893 2016.2 Download - Downloading Vivado on Windows 10, the browser states "The signature of Xilinx_Vivado_SDK_2016.2_0605_1_Win64.exe is corrupt or invalid" N/A N/A
67890 2016.3 - Vivado Simulator - Scope for pre-compiled IP instance is missing in Scope Window N/A N/A
67891 UltraScale DDR4/DDR3 - Ping-Pong PHY behavioral simulations fail with data errors when using BFM simulation mode N/A N/A
67522 SDSoC - SDDebug and SDRelease build configurations decoupled N/A N/A
67523 SDSoC - Passing command line arguments to executable with Performance Estimation N/A N/A
67520 MIG 7 Series DDR3 - Periodic reads used for VT tracking might be missing during continuous write transactions N/A N/A
67528 How to speed up "10G/25G Ethernet Subsystem" simulation N/A N/A
67521 SDSoC - SDSoC 2016.2 - Release Notes and Known Issues N/A N/A
6752 *Obselete* 1.5i JTAG Programmer - SP2 Patch update-9500XL/Win95 error when programming (Error:basut - Check the target power supply is stable...) N/A N/A
67820 Zynq UltraScale+ MPSoC: 2016.3 PMUFW, Error Management N/A N/A
67828 Zynq UltraScale+ MPSoC: Linux SPI interrupts mapping N/A N/A
67825 JESD204 - Initial Lane Alignment N/A N/A
67824 2016.2 Virtex UltraScale+ - Clock Placer can fail to partition UltraScale+ designs due to not properly accounting for PS8 blocks interference with clock routing N/A N/A
67829 JESD204 - Data Transmission N/A N/A
67499 2016.2 Vivado - Loading a synthesized or implemented design in Vivado gives an Internal Exception and the error message "Xgd File 'xc****.xgd' is missing" N/A N/A
67491 High Speed SelectIO Wizard - Unable to select the SLVS IOSTANDARD N/A N/A
6749 Virtex Configuration - The DONE pin does not go High, and the INIT pin does not go Low N/A N/A
671 Error cl192 or cl126 while converting a PALASM (PDS) file N/A N/A
67558 Vivado - ERROR: [Project 1-589] Checkpoint part '(part name)-es2' is not available. Closest-matching available part(s): (part name) N/A N/A
67553 2016.2 - SDSoC - ZC706_mem platform failing N/A N/A
67551 Vivado Simulator does not give any warning or error message when an integer goes out of range N/A N/A
N/A N/A
67651 Zynq UltraScale+ MPSoC, PS DDR - Video Class Traffic Might Underrun When DDR ECC Is Enabled N/A N/A
N/A N/A
67796 ERROR: [VRFC 10-449] cannot open file "/afs/xxxx/obsfdacmj4ltsh34hqceamceyrcimraog5opt0hdnxd.sdb" for writing N/A N/A
67793 MIPI CSI-2 Receiver Subsystem v2.0 (Rev. 1) - Why do I see timing failing on the video_aresetn when using two CSI-2 Receiver Subsystems with one as a master and one as a slave? N/A N/A
67794 JESD204 - Code Group Sync N/A N/A
N/A N/A
67013 2016.1 - compile_simlib fails with 3-4 errors for all simulators when the -ise_install_path option is used N/A N/A
67010 Vivado HLS 2016.1 : Why does the perfect loop example have poorer performance versus the imperfect loop example? N/A N/A
67015 2016.1 - compile_simlib - Abnormal program termination (EXCEPTION_ACCESS_VIOLATION) N/A N/A
67012 2016.x Vivado Simulator - Known Issues N/A N/A
6701 VERILOG-XL - How do I run simulation with Verilog-XL? N/A N/A
67420 2016.2 XEN test is not working on Zynq UltraScale+ MPSoC boards in QEMU N/A N/A
67426 SDSoC - Cannot debug application when targeting a custom platform N/A N/A
67421 DMA Subsystem for PCI Express (Vivado 2016.2) - Prefetchable support for 64-bit BAR N/A N/A
67422 UltraScale FPGA Gen3 Integrated Block for PCI Express (Vivado 2016.2) - Link up failure after multiple resets N/A N/A
67427 Zynq UltraScale - How can I debug a Linux application running on a Zynq UltraScale QEMU N/A N/A
N/A N/A
67938 2016.X - Simulation - ModelSim generates error when simulating XPM N/A N/A
67936 Vivado - ERROR: [Project 1-202] Error writing the XML file 'Z:/eda/myproj/myproj.xpr' N/A N/A
67933 UltraScale/UltraScale+ Memory IP - Error messages generated after archiving and moving a project containing Memory IP with a custom part N/A N/A
67931 1G/2.5G Ethernet PCS/PMA or SGMII v15.2 - SGMII over LVDS option is not enabled in GUI for devices which do not have Transceivers N/A N/A
67939 Soft Error Mitigation (SEM) IP – Location of the makedata.tcl file has changed in Vivado 2016.3 N/A N/A
67930 2016.2 PetaLinux Zynq UltraScale+ MPSoC GEM Clock Control needs to set for EMIO clock for RX N/A N/A
N/A N/A
67098 2016.1 UltraScale Implementation - New DRC check for clock routing in UltraScale results in both new positive and false-positive errors. N/A N/A
67097 Vivado Device Programmer - 2016.1 VU440 BBR programming failure N/A N/A
6709 FPGA Configuration - Done pin does not go high, Startup block is used N/A N/A
67159 2016.1 Petalinux-tools - ATF can be built in OCM or DDR using PetaLinux tools N/A N/A
67157 Zynq UltraScale+ MPSoC: eMMC Programming Solutions N/A N/A
67158 2016.1 PetaLinux - Petalinux-package command allows PMUFW to be included in the boot image N/A N/A
67150 2016.1 - Simulation Libraries - Compiling Simulation Libraries also includes IP N/A N/A
67155 How to handle TXPIPPMEN in GTY and GTH UltraScale HSSIO N/A N/A
AR# 62483
日期 01/18/2016
状态 Active
Type 设计咨询
器件
IP
People Also Viewed